electronica’s Exhibition Director talks about a record-breaking show
From idea to debugging in five minutes: Renesas at electronica 2026

From idea to debugging in five minutes: Renesas at electronica 2026

From idea to debugging in five minutes: Renesas at electronica 2026 From idea to debugging in five minutes: Renesas at electronica 2026
This entry is part 10 of 11 in the series Tech videos: DigiKey at electronica 2026

At electronica 2026, on the DigiKey booth, Paige Hookway spoke with David Renno, Renesas’s Regional Marketing Director, about the launch of its Xplore Developer Hub, integrated with Renesas 365.

Renesas is well known across automotive, industrial, and building automation applications, with a portfolio that spans MCUs, power, analog, sensing, and connectivity, said Renno, who joined the company three years ago through its acquisition of NFC specialist Panthronics. For the past six months, he has been focused on Xplore within the company’s embedded processing business.

The embedded developer gap

So why does the embedded developer journey still feel so fragmented? Renno said that the problem starts long before the first line of code is written.

“The embedded developer starts with an idea. They know exactly what they want to build. But the first challenge is to put together everything,” he said.

That means finding the right MCU and technology, digging through documentation, choosing tools, and setting everything up; a process that can easily consume hours of engineering effort before any real development begins. Asked where developers lose the most time – finding the right parts, getting started, or building a real application – Renno said: “Actually, all three.”

Even once a developer has example code running on their desk, there is a further hurdle. Much of the code offered during evaluation is demo code or example projects that aren’t designed for reuse. “They are not architected to be integrated in your project,” Renno said, meaning that moving into the design phase remains a challenge in its own right.

Introducing Xplore Developer Hub

Xplore is Renesas’ answer to these challenges faced by embedded developers. “It’s Renesas’ embedded developer hub, and it’s … natively integrated, I would even say, within Renesas 365,” Renno said.

The hub presents developers with a selection of applications built from hardware and software building blocks. A developer can pick an application relevant to their project, view its block diagram to see how the hardware and software blocks fit together, move into the code, then flash the board and start debugging, all without leaving the browser or installing anything.

“It’s literally four clicks to arrive to the last step and roughly four to five minutes, if you consider the build of the project,” said Renno.

That speed comes from the integration with Renesas 365, Renesas’ Cloud-based development platform, which became generally available in March 2026. Because everything is browser- and Cloud-based, it also supports collaboration. When a developer selects an application, a solution project is retrieved into their workspace, and they can share a link to that project so their team can contribute too.

Use-case-driven building blocks

According to Renno, the biggest differentiator lies in how Xplore’s software building blocks are created. They are use-case driven, developed by studying real end applications.

Taking a thermostat as an example, he described how the system can be broken down into individual use cases – the HMI and display, sensors, and Wi-Fi or Bluetooth connectivity – each of which is analysed and implemented as a software building block. The result is a catalogue of use cases that developers can pick from, whether they’re building a thermostat, a coffee machine, or an industrial controller.

Crucially, these blocks can be taken directly into a user’s own project. “It’s not like a demo code; it’s really a code that is made to be adopted,” Renno said.

Another differentiator is Renesas 365 itself. “Literally in five minutes you’re getting to the design phase with a working system on your desk, and this is a game changer, we believe, in the industry.”

Lowering the barrier to entry

Because Xplore is application-focused rather than aimed at specific customers or end products, it is designed to make technology discovery as easy as possible across a very broad market. The same use cases could appear in coffee machines, vacuum cleaners, e-cigarettes, and countless other applications.

The software expertise needed to get started is also minimal. Rather than learning how to configure peripherals, work at register level, or drive an ADC, developers connect their own application layer to the software building blocks.

“We want ideally the embedded developer time to be really focused on innovation,” Renno said – the innovation of their end application, rather than learning how the underlying platform works.

What’s instore for Xplore

Xplore launches with roughly 100 software building blocks and a limited number of applications, but Renesas has an intensive roadmap ahead, including more blocks for motor control and capacitive touch HMI. As the library of common building blocks grows, so will the number of applications that can be built from them.

“I would say we should meet at embedded world and see how it has grown,” said Renno on his confidence in the hub’s trajectory. So, watch this space and look out for our embedded world coverage in March 2027!

Watch the full interview here:

Tech videos: DigiKey at electronica 2026

electronica 2026: Phoenix Contact’s Tim Kindermann on what’s next for Single Pair Ethernet Quieter by design: Frederik Dostal on low-noise power at electronica 2026

Tech videos: DigiKey at electronica 2026

Würth Elektronik’s Alexander Gerfer on AI, energy, and smarter electronics design at electronica 2026

Murata at electronica 2026: teaching robots to move like us

Harwin’s Peter Schneid on XPi, metal-bodied connectors, and AI search at electronica 2026

electronica 2026: Qorvo’s Debbie Gibson on keeping drones connected

Talking Edge AI, reinforcement learning, and mesh networking with Shawn Hymel at electronica 2026

Talking Edge AI, reinforcement learning, and mesh networking with Shawn Hymel at electronica 2026

Why automotive-grade connectors are finding new homes

Why automotive-grade connectors are finding new homes

electronica 2026: WAGO and DigiKey reflect on a partnership that began on the show floor

Orion Fans talk data centres, ATEX, and the power of stock at electronica 2026

Orion Fans talk data centres, ATEX, and the power of stock at electronica 2026

electronica 2026: Phoenix Contact’s Tim Kindermann on what’s next for Single Pair Ethernet

From idea to debugging in five minutes: Renesas at electronica 2026

From idea to debugging in five minutes: Renesas at electronica 2026

Quieter by design: Frederik Dostal on low-noise power at electronica 2026

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post
electronica’s Exhibition Director talks about a record-breaking show

electronica’s Exhibition Director talks about a record-breaking show