Microchip achieves milestones for its spaceflight computing series
Quieter by design: Frederik Dostal on low-noise power at electronica 2026

Quieter by design: Frederik Dostal on low-noise power at electronica 2026

Two decades ago, Frederik Dostal, Power Specialist at Analog Devices, believed power management was heading for commoditisation. Today, he’s convinced of the opposite. Speaking to Electronic Specifier’s Lucy Barnard on the show floor at electronica 2026, Dostal explained why noise has become one of the defining challenges in power supply design, and how ADI’s Silent Switcher, and µModule technologies are tackling it at source.

A career in power

Dostal, who manages systems applications for power management in ADI’s aerospace and defence business, has spent the last 25 years working in power management for semiconductor companies. Much of that time has been spent running technical seminars on power management and on LTspice, ADI’s circuit simulation tool, alongside supporting customers, and building circuits.

“I have always been a power management guy, so to say,” he says.

According to Dostal, electronica is a happy hunting ground. ADI brought roughly 22 demonstrations to the show this year, spanning automotive, industrial, aerospace and defence, and data centre applications. Every one of them features ADI power management, because, as Dostal puts it, “everything has to be powered, of course.”

Why power supply noise matters

“There was a time roughly 20 years ago, I thought everything within the power management field would become a commodity,” Dostal recalls. Instead, the field has seen a steady stream of innovation, and low noise is one of its biggest themes.

There are two main drivers. The first is regulatory: many designs must meet strict electromagnetic interference (EMI) specifications. The second is signal integrity. Where a PCB carries very weak signals, noise injected from the power supply degrades them, costing audio or video quality, image quality in healthcare imaging systems, or other valuable information being transmitted.

As a result, Dostal ranks noise “… next to power density …” as “… one of the … most important specifications for a power supply these days.”

The switching problem

Switch-mode power supplies are prized for converting one voltage level to another efficiently. They do this by chopping the current flow, turning it on and off within a few nanoseconds or even less, while still delivering a DC output. Switching several amps that quickly inevitably causes voltage disturbances and EMI.

“So, by definition, our switch mode power supplies cause EMI,” Dostal says.

Filtering can help, but he’s clear that it isn’t the best first line of defence: “… it’s much better to reduce the noise being generated than having to filter it as a second step.”

That thinking underpins ADI’s Silent Switcher technology, now in its third generation and on demonstration at the booth. The architecture arranges the pulsed current paths so that the magnetic fields they generate cancel each other out. Crucially, this tackles radiated emissions, which can’t be easily dealt with by an LC filter and would otherwise call for shielding.

“Nobody likes shielding because it’s expensive,” Dostal notes, adding that it also complicates manufacturing. ADI’s aim is to reduce radiated emissions through integrated circuit and application design instead, while conventional filtering can still be used to reduce conducted emissions on the input and output sides of the supply.

Linear regulators are improving too. Dostal points to ultra-low noise linear regulators with better power supply rejection ratio (PSRR) and lower low-frequency noise from the internal voltage reference, voltage divider, and regulation loop.

µModule regulators: integration as a noise strategy

ADI’s Power µModule devices integrate the switching regulator IC with its passive components, including the inductor and capacitors, into a single package. The first benefit is ease of use: “… a user or a designer doesn’t have to select the external components. They’re all integrated.”

The tight integration also delivers high power density and, importantly for noise, very small AC current paths, or ‘hot loops’, which further cut radiated emissions. The latest development is a µModule regulator available in a shielded package, which Dostal says brings radiated emissions close to zero: “… it’s the lowest radiated emissions on the market today.”

It’s the first µModule product with this package-level shielding, but he expects more to follow: “I don’t see any reason why that shouldn’t continue for other products …”

What comes next

Looking ahead, Dostal sees power density remaining a priority, which brings thermal management into sharp focus. Silent Switcher 3 devices expose the silicon on the top of the package, allowing heat to be removed through the top side as well as through the PCB. That’s common on power MOSFETs, but rare for switching regulator ICs.

Alongside further reductions in radiated and conducted emissions, efficiency remains key. “Because if you’re more efficient, you generate less heat,” he explains, which in turn makes that heat easier to manage.

And for someone who once expected power management to stagnate, Dostal is now firmly optimistic: “… now I am convinced innovation will keep on going. There will be great things coming out. I just don’t know what it is yet.”

Watch the full interview

To hear more from Frederik Dostal, watch the full video interview: DigiKey at electronica 2026 with ADI

Keep Up to Date with the Most Important News

By pressing the Subscribe button, you confirm that you have read and are agreeing to our Privacy Policy and Terms of Use
Previous Post
Microchip achieves milestones for its spaceflight computing series

Microchip achieves milestones for its spaceflight computing series