Z Communications Inc

Address:
9939 Via Pasar
San Diego
CA 92126
United States of America

Phone: +001 (858) 621-2700

Fax: +001 (858) 621-2722

Web: http://www.zcomm.com


Z Communications Inc articles

Displaying 1 - 20 of 73

VCO covers a frequency range of 2400 to 2600MHz

VCO covers a frequency range of 2400 to 2600MHz
  Covering the frequency range of 2400 to 2600MHz within a tuning voltage range of 1 to 12VDC, the CRO2500C-LF VCO has been released by Z-Communications. The device features a spectrally clean signal of -106dBc/Hz at 10 kHz offset and a typical tuning sensitivity of 23MHz/V.
24th June 2015

VCO features a spectrally clean signal of -96dBc/Hz at 10kHz offset

VCO features a spectrally clean signal of -96dBc/Hz at 10kHz offset
Operating over the frequency range of 1650 to 2410MHz within 2 to 14V of tuning, the V614ME28-LF VCO has been released by Z-Communications. The device features a spectrally clean signal of -96dBc/Hz at 10kHz offset, while operating from a 12VDC supply and drawing 20mA of current.
24th June 2015

VCO operates across a -40 to +85ºC temperature range

VCO operates across a -40 to +85ºC temperature range
  Operating at 895 to 905MHz with a tuning voltage range of 0 to 5VDC, the CRO0900A-LF VCO has been released by Z-Communications. The device features a spectrally clean signal of -120dBc/Hz at 10kHz offset, and a typical tuning sensitivity of 5MHz/V.
24th June 2015


VCO features a clean spectral signal of -104dBc/Hz

VCO features a clean spectral signal of -104dBc/Hz
  Operating at 6800MHz within a tuning voltage range of 0.5 to 4.5VDC, the CRO6800Z-LF VCO has been introduced by Z-Communications. The device features a remarkably clean spectral signal of -104dBc/Hz at 10kHz offset and a typical tuning sensitivity of 18MHz/V.
23rd June 2015

Ceramic resonator VCO is 70% smaller than competitors

Ceramic resonator VCO is 70% smaller than competitors
The first in a line of ceramic resonator VCOs, which saves precious board space while delivering exceptional phase noise performance, has been introduced by Z-Communications. The TRO1800A-LF covers an 1800MHz frequency within a tuning voltage range of 0.5 to 4.5VDC, while featuring a spectrally clean signal of -117dBc/Hz at 10kHz offset.
23rd June 2015

Z-Communications releases 2015 Product Selection Guide

  Z-Communications has announced the release of a new Product Selection Guide. This short form catalogue includes a wide variety of surface mount VCO and PLL modules ranging from 40MHz to 15GHz.
23rd June 2015

VCO has a tuning voltage range of 0.5 to 2.5VDC

VCO has a tuning voltage range of  0.5 to 2.5VDC
Operating at 445 to 480MHz with a tuning voltage range of 0.5 to 2.5VDC, the V480MEM2-LF VCO has been released by Z-Communications. Featuring a typical tuning sensitivity of 25MHz/V, the device has a spectrally clean signal of -113dBc/Hz at 100kHz offset. Operating from a 3.3VDC power supply and typically consuming 12mA, the VCO delivers 0dBm output power into a 50Ω load.
5th January 2015

VCO features a spectrally clean signal of -115dBc/Hz

VCO features a spectrally clean signal of -115dBc/Hz
  A VCO, which operates at 2265 to 2280MHz with a tuning voltage range of 0.5 to 4.5VDC, has been released by Z-Communications. The CRO2273B-LF features a spectrally clean signal of -115dBc/Hz at 10kHz offset and covers the band with a typical tuning sensitivity of 4MHz/V.
11th December 2014

VCO features a typical tuning sensitivity of 23MHz/V

VCO features a typical tuning sensitivity of 23MHz/V
  Operating at 1445-1820MHz with a tuning voltage range of 2-25VDC, the CLV1625B-LF VCO has been released by Z-Communications. Alongside a spectrally clean signal of -105dBc/Hz at 10kHz offset, the VCO features a typical tuning sensitivity of 23MHz/V.
3rd December 2014

Single frequency synthesiser targets radar systems

Single frequency synthesiser targets radar systems
  Operating at 13.05GHz with an external 100MHz reference oscillator, the SFS13050H-LF single frequency synthesiser has been released by Z-Communications. The synthesiser, which features a typical phase noise of -88dBc/Hz at 10kHz offset, is suitable for radar systems.
26th November 2014

VCO delivers phase noise of -104dBc/Hz at 10kHz offset

VCO delivers phase noise of -104dBc/Hz at 10kHz offset
Incorporating both electrical and mechanical elements for fine and coarse tuning, the DRO11000A dielectric resonator VCO has been released by Z-Communications. Designed to cover 11000MHz, the device features a low phase noise of -104dBc/Hz at 10kHz offset. While typically consuming 23mA of current, the VCO operates from a 5VDC supply.
15th October 2014

Synthesiser delivers phase noise of -90dBc/Hz at 10kHz

Synthesiser delivers phase noise of -90dBc/Hz at 10kHz
Delivering an output signal at 11.3GHz while operating from an external 10MHz reference, a fixed frequency synthesiser has been introduced by Z-Communications. An internal PIC controller presets the SFS11300H-LF synthesiser's output frequency, removing the need for external programming and easing installation.
9th October 2014

VCO can be implemented in any PLL system

VCO can be implemented in any PLL system
The CLV0989A-LF, a VCO which operates over the frequency range of 939-1039MHz within 0.5-4.5VDC of tuning, has been released by Z-Communications. Featuring a spectrally clean signal of -109dBc/Hz at 10kHz offset and a tuning linearity of 1.1:1, the VCO is easy to implement into any PLL system.
25th September 2014

Synthesiser delivers 'unparalleled' phase noise performance

Synthesiser delivers 'unparalleled' phase noise performance
Designed to deliver an output signal at 12GHz while fixed to an external 100MHz reference oscillator, a fixed frequency synthesiser has been released by Z-Communications. The SFS12000H-LF, which is RoHS compliant, features phase noise performance of -98dBc/Hz at 1kHz and -103dBc/Hz at 10kHz offset.
25th September 2014

Synthesiser features a typical phase noise of -86dBc/Hz

Synthesiser features a typical phase noise of -86dBc/Hz
Suitable for satellite communications applications, the SFS6864A-LF fixed frequency synthesiser has been introduced by Z-Communications. The single frequency C-band synthesiser operates at 6864MHz with a 10MHz reference, and features a typical phase noise of -86dBc/Hz at the 10kHz offset.
26th August 2014

Ultra-low phase noise fixed frequency synthesizer

Ultra-low phase noise fixed frequency synthesizer
Z-Communications has today introduced a new RoHS compliant Fixed Frequency Synthesizer, model SFS10000C-LF in X-band. The SFS10000C-LF is a single frequency synthesizer that operates at 10 GHz and features a typical phase noise of -100 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
16th September 2013

Ultra Wideband VCO Tunes From 2.7 to 5.4 GHz

Ultra Wideband VCO Tunes From 2.7 to 5.4 GHz
The new V600ME31-LF operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc. This octave tuning VCO features a typical phase noise of -107 dBc/Hz @ 100 kHz offset and an average tuning sensitivity of 140 MHz/V.
19th April 2013

Z-Communications Unveil New DRO Series VCOs With Electrical Tuning 8 To 12 GHz

Z-Communications Unveil New DRO Series VCOs With Electrical Tuning 8 To 12 GHz
Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.
16th April 2013

Z-Communications Low Noise Dielectric Resonator SMT VCO At 8 GHz

Z-Communications Low Noise Dielectric Resonator SMT VCO At 8 GHz
Z-Communications introduce a new high performance voltage controller oscillator, DRO8000A. The new high performance DRO8000A covers 8000 MHz within a tuning voltage range of 0-12 Vdc and is ideal for the test and measurement market.
16th April 2013

New DRO Series VCOs with Electrical Tuning 8 to 12 GHz

New DRO Series VCOs with Electrical Tuning 8 to 12 GHz
Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.
14th January 2013


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

electronica 2018
13th November 2018
Germany Messe Munchen
SPS IPC Drives 2018
27th November 2018
Germany Nuremberg
International Security Expo 2018
28th November 2018
United Kingdom London Olympia
The Security Event 2019
9th April 2019
United Kingdom NEC, Birmingham
Ceramics Expo 2019
29th April 2019
United States of America International Exposition Center (I-X Center)