Pickering Interfaces will showcase their broad catalog of Ethernet LXI and PXI RF & Microwave switching solutions at the IEEE MTT-S 2015 International Microwave Symposium (IMS) at booth #2814 on May 19 - 21, 2015.

  Pickering Interfaces will be showcasing its latest switching modules and chassis at SMT Hybrid Packaging 2015 on 5th to 7th May, 2015 in booth 6-110. It's latest products include additions to Pickering’s PXI 16A switching, PXI isolated power supply and PCI fault insertion solutions.

The SMT Hybrid Packaging 2015 in Nuremberg (May 5-7) will provide a platform for Pickering Interfaces PXI 16A switching, PXI isolated power supply, and PCI fault insertion solutions. New launches in the PCI range include a PCI 2A Fault Insertion Switch – for switching fault conditions for burn-in/endurance testing of Electronic Control Units (ECUs).

A PCI fault insertion card, available as either a one or two slot short PCI card, has been introduced by Pickering Interfaces. The 50-190 card features 75, 64 or 36 fault insertion channels and one or two fault insertion busses, each of which can select from three fault sources. The PCI fault insertion card also has the ability to introduce open circuit paths, shorts between paths or shorts to fault connections such as battery or ground, as well ...

Pickering Interfaces is lowering the cost of ownership of switching systems with the introduction of its eBIRST Switching System Test Tools. These diagnostic test tools, designed specifically for Pickering Interfaces PXI, PCI or LXI (Ethernet) products, simplify switching system fault finding by quickly testing the system and identifying the faulty relays.

Pickering Interfaces will showcase its catalogue of PXI and Ethernet LXI switching solutions at Amper, in Hall 5, Booth 3.18 from 24th to 27th March 2015. These products include Pickering’s Ethernet LXI, PXI, Programmable Resistors, Microwave Multiplexer and PCI Ranges.

Following the success of its 16A uncommitted relay modules, Pickering Interfaces has introduced two 16A PXI switching modules. The PXI power multiplexer module is available in seven configurations ranging from 4-off 2:1 multiplexers to 1-off 16:1 multiplexer. The PXI power matrix module is available in four configurations with matrix sizes of 8x2 and 4x4 and the ability to expand the matrix size with the Y-Axis loop-through connections.

PCI and PXI programmable resistor and relay cards, which feature 12 resistor channel options, a resolution of 0.25-2Ω and channel counts of either two or four, have been released by Pickering Interfaces. To extend the resistance range within a test system, the 50-294 PCI card and the 40-294 PXI card are optionally available with eight SPST relays. 

Designed to support DMMs or source meters which require the closure of up to 1024 crosspoint relays, the 60-553 LXI switching matrix has been introduced by Pickering Interfaces. Featuring a dual bus design, the 1024x4, 1-pole, 1U device can be divided into two smaller independent matrices, such as 512x4. 

Pickering Interfaces will showcase its broad catalog of PXI and Ethernet LXI switching solutions at DesignCon, booth 529, 28th to 29th January in Santa Clara, CA. These products include Pickering’s PXI Fault Insertion, Programmable Resistors, RF Matrices, Microwave Multiplexers and LXI ranges. Listed below is a selection of the products that will be showcased:

Pickering Interfaces has added two PXI high power solid-state switch modules to its range of PXI switching solutions. The PXI 25A Solid State SPST Switch (40-184) offers 3 or 6-off SPST solid-state switches capable of handling 25A signals at up to 100V, whilst the PXI 1.5A Solid State SPST Switch (40-185) offers 3 or 6-off SPST solid-state switches able to handle 1.5A at up to 400V.

Pickering Interfaces to announce a significant milestone in providing test engineers with the optimum PXI solutions for their Test & Measurement applications. The company now offers over 1000 PXI modules, ranging from their BRIC™ high density switching matrices, RF/microwave and optical switching products through to precision resistor switching networks for sensor emulation.

At this year's electronica, from 11th to 14th November 2014 in Munich, Pickering Interfaces will be exhibiting LXI and PXI switching solutions. These solutions include the PXI Signal Insertion and Monitor Matrix, the updated PXI Large Matrix BRIC, the updated PXI Microwave Multiplexer and the LXI High-Density Matrix.

Pickering Interfaces launched four new switching modules at AUTOTEST 2014. These products include a new PXI signal insertion and monitor matrix, and updates to their PXI microwave multiplexers, PXI high-density large matrix BRIC range and PXI fault insertion switches.

Exhibiting from stand 162 at EuMW (European Microwave Week), 7th to 9th October in Rome, Pickering Interfaces will present their PXI and LXI Ethernet RF & microwave switching solutions portfolio. Including multiplexers, matrices and general-purpose switches ranging from low-level DC signals to RF and microwave, the switching solutions can be used to increase the flexibility of test and measurement systems with signal bandwidths up to 65GHz.

LXI and PXI switching solutions will take centre stage on Pickering Interfaces stand at AUTOTEST 2014 (Sept 16-18, St. Louis). For their PXI range, Pickering will feature new and updated products, including an addition to their PXI medium-density switch matrix range — a new 32x4 signal insertion and monitor matrix with switched loop-thru for simplified connection of digital I/O.

To meet demand for programmable resistor solutions, Pickering Interfaces has introduced two ranges of PCI cards. The first range are PCI RTD simulator cards, which are intended for the emulation of PT100 and PT1000 resistive temperature sensors and have fine setting resolution characteristics.

Pickering Interfaces will be showcasing their broad catalog of PXI and Ethernet LXI switching solutions at SEMICON West booth 6177 on July 8-10 in San Francisco, CA. These products include Pickering’sPXI Power Relays, RF Matrices, Microwave Multiplexers and LXI Chassis.

Pickering Interfaces will be showcasing its latest switching modules and chassis at Automotive Testing Expo Stuttgart 2014 on June 24-26 in booth 1100. These products include Pickering’s PXI, RF Matrix, Microwave Multiplexer and LXI ranges. All the PXI modules can be used in any PXI chassis, can be fitted to PXI hybrid slots in a PXIe chassis and can also be used in Pickering’s LXI Modular chassis for users preferring control via...

Pickering Interfaces will be showing its PXI, RF Matrix, Microwave Multiplexer and LXI switching modules and chassis at the Automotive Testing Expo Stuttgart (June 24-26). The PXI RF Solid State 6 GHz Multiplexers (40-88X) include an SP8T (8:1) MUX occupying two PXI slots and an SP16T (16:1) MUX occupying three PXI slots.