Vishay Intertechnology has released two MICRO FOOT power MOSFETs with maximum dimensions of 1 mm by 1 mm by 0.548 mm, which sets a new milestone as the smallest chipscale power MOSFETs yet.

Vishay has announced what it says is the industry’s first high-performance multilayer ceramic chip antennas for mobile devices to cover the entire UHF band from 470 MHz to 860 MHz. Utilizing Vishay's unique materials and manufacturing technologies, the new Vishay Vitramon chip antennas comply with the MBRAI standard while maintaining small outlines of 35 mm by 5 mm by 1.2 mm for the VJ 3505, and 10.5 mm by 15.5 mm by 1.2 mm for the VJ 6040.

Vishay has announced what it says is the industry’s first high-performance multilayer ceramic chip antennas for mobile devices to cover the entire UHF band from 470 MHz to 860 MHz. Utilizing Vishay's unique materials and manufacturing technologies, the new Vishay Vitramon chip antennas comply with the MBRAI standard while maintaining small outlines of 35 mm by 5 mm by 1.2 mm for the VJ 3505, and 10.5 mm by 15.5 mm by 1.2 mm for the VJ 6040.

Vishay Intertechnology has announced a new Vishay Nobel crane-weighing solution from Vishay Systems. It incorporates Vishay load cells and Vishay Systems state-of-the-art instrumentation for logging time, position, and weight to optimize service and maintenance intervals. It provides a cost-effective crane-weighing solution that complies with European crane standard FEM 9.755, which establishes calculation of service intervals and life-cycle meas...

Vishay has broadened its optoelectronics portfolio with the introduction of the new AEC-Q101-qualified miniature TEMD7x00X01 PIN photodiodes and TEMT7x00X01 phototransistors. Featuring an 0805 surface-mount package with an ultra-small 1.25-mm by 2.0-mm footprint and low 0.85-mm profile, the devices are available with spectral sensitivity to ultraviolet, visible, and near-infrared, or to near-infrared radiation only.

Vishay has broadened its optoelectronics portfolio with the introduction of the new AEC-Q101-qualified miniature TEMD7x00X01 PIN photodiodes and TEMT7x00X01 phototransistors. Featuring an 0805 surface-mount package with an ultra-small 1.25-mm by 2.0-mm footprint and low 0.85-mm profile, the devices are available with spectral sensitivity to ultraviolet, visible, and near-infrared, or to near-infrared radiation only.

Vishay has announced that it has doubled the rotational life of its P30L compact panel potentiometers, which are now specified to deliver 2 million cycles at rated power. The potentiometers’ power rating has also been increased, from 2 W to 3 W. The long-life performance of the P30L reduces the need for replacement parts, increasing reliability and lowering maintenance costs. Its rotational life of 2 million cycles represents at least a 20-fold...

Vishay Intertechnology has announced a new series of 1500W surface-mount automotive transient voltage suppressors (TVS) with the industry’s lowest profile of 1.1 mm, and breakdown voltages from 6.8 V to 43 V. Featuring the eSMP TO-277A package, the TPC series offers a 27 % smaller footprint than devices in the traditional SMC package.

Vishay has announced the release of the new TNPU e3 series of high-precision thin film flat chip resistors in 0603, 0805, and 1206 case sizes. Vishay’s new TNPU e3 thin film flat chip resistors combine the proven reliability of TNPW e3 products with an advanced level of precision. This unique combination makes the devices perfectly suited for applications such as amplifiers, precision voltage dividers, and control units in industrial, automotiv...

Vishay has introduced the improved VTAZ series of ultra-high-precision Bulk Metal Z-Foil axial-lead resistors with extended power ratings to 1.0 W and resistance values to 300 kΩ. While typical axial resistors offer a load-life stability of > 0.1 % through a 2000-hour workload, Vishay’s new devices feature an improved load-life stability of ± 0.005 % (50 ppm) at + 70 °C for 2000 hours at rated power. For high-precision applications, the ...

Vishay has announced a versatile new planar transformer designed for switchmode power supply (SMPS) applications, including flyback, forward, push-pull, and half-bridge converters. Delivering a high level of flexibility, the new Vishay Sfernice PLAC 100 is user-configurable with software supplied by Vishay, which allows designers to adapt the transformer to a wide range of applications by setting the power supply type and desired level of input ...

Vishay Intertechnology has announced the VHP100, a new hermetically sealed ultra-high-precision Bulk Metal Foil resistor with such a low temperature coefficient of resistance (TCR) that a new definition, “window,” has been introduced by Vishay. The window definition requires that the absolute resistance remain within the stated window over the temperature range specified.

Vishay has introduced a new 20-V p-channel power MOSFET with the lowest on-resistance ever achieved for a p-channel device a 1.6-mm by 1.6-mm footprint area. The new SiB457EDK is built on TrenchFET Gen III p-channel technology, which uses self-aligning process techniques to pack one billion transistor cells into each square inch of silicon. This leading edge technology allows a super fine, sub-micron pitch process that cuts the industry’s best ...

Vishay has launched a new IHLP low-profile, high-current inductor in the 6767 case size, featuring a 17.15-mm by 17.15-mm footprint and 7.0-mm profile. The IHLP-6767GZ-11 offers currents up to 75.5 A and standard inductance values from 0.33 µH through 100 µH, the industry’s highest for a composite surface-mount inductor.

Vishay Intertechnology, Inc. today launched a new 600-V FRED Pt Hyperfast tandem rectifier that reduces losses in high-efficiency continuous current mode (CCM) power factor correction (PFC) applications with its extremely fast reverse recovery time, low forward voltage drop, and low package thermal resistance.

To meet derating requirements in +28-V power supply designs, Vishay Intertechnology, Inc. today announced that it has extended its TANTAMOUNT Hi-Rel COTS T83, low-ESR TR3, and standard industrial grade 293D series of solid tantalum chip capacitors to offer ratings up to 63 V, the highest voltage available in the industry for this device type.

Vishay has announced today that the Vishay Systems family of G4 advanced process control instruments has been enhanced to include remote access via web interface. This makes possible setup, maintenance, diagnostic tests, software updates, and other activities using a standard web browser.

Vishay has introduced the new VCS1610 high-precision Bulk Metal Foil surface-mount current sensing chip resistor. The new device provides an absolute TCR of ± 2.0 ppm/°C from (55 °C to + 125 °C, + 25 °C ref., and tolerances to ± 0.5 %. While typical current sensing resistors offer a load-life stability of ≤ 0.2 % through a 1000-hour workload, the VCS1610 features an improved load-life stability of ± 0.02 % at + 70 °C for 2000 hours ...

A power MOSFET with what is claimed to be the industry’s lowest on-resistance for a 60-V device in a package with double-sided cooling was released today by Vishay. The new SiE876DF, which comes in an SO-8 sized PolarPAK package, boasts maximum on-resistance of 6.1 milliohms at a 10-V gate drive, a 13 % improvement over the next best comparable device on the market.

Vishay has introduced a precision thin film surface-mount resistor networks and dividers to feature a 4-mm by 4-mm dual flat no-lead package with a 0.65-mm pitch and low 1-mm profile. The new package format of the DFN series saves 53 % on PC board space compared to traditional 5-mm by 6-mm SOIC 8-lead packages.