TDK Corporation has announced the introduction of a 48V 480W output model to the economically priced DRB series of 15 to 480W DIN rail mount power supplies. The product’s narrow 84mm width provides additional space for other DIN rail modules, or the use of a smaller enclosure.
TDK Corporation has announced that it will present its complete sensor product range from a single booth at Sensor+Test 2019. The product range includes magnetic sensors, motion and sound sensor solutions, temperature and pressure sensors and covers automotive, industrial, aeronautics, security, and medical markets.
TDK Corporation has announced the introduction of the TDK-Lambda brand QM4 series of AC-DC modular power supplies reducing the series’ footprint by 15%. The 108mm wide QM4 can accept up to four single or dual output modules and a dual output standby/signal board to provide up to 10 outputs. All models in the QM series feature low acoustic noise and full MOPPs isolation.
TDK Corporation has announced the introduction of the GXE600 series of 600W rated AC-DC power supplies, certified to the IEC 60601-1 medical safety standard as well as IEC 62368-1. In a 1U high package, these convection cooled products have the ability to be digitally programmed across a wide range using an RS-485 interface (Modbus RTU protocol) or with a 0-6V external voltage.
TDK Corporation has expanded its Micronas linear Hall-effect sensor portfolio with the programmable HAL 1890 supporting the latest SENT protocol according to SAE J2716 Rev. 4. The HAL 1890 now comes with digital output signal supervision and is as small, robust, and cost effective as the already existing HAL 188x variants. The HAL 1890 is an optimal system solution to measure small angles of up to 90° or linear displacements of a few millimeters in harsh environments.
TDK Corporation (TSE 6762) has announced the recent installation of solar panels at its power supply manufacturing facility in Ilfracombe, North Devon. Electricity produced by the 92kWh solar array will help power the whole factory, including the recently opened EMC test facility. The company anticipates a return on investment in approximately 5 years.
TDK Corporation has announced the new series of µPOL DC-DC converters, according to the company it will be the industry’s most compact and highest power density point-of-load solutions for applications such as big data, machine learning, Artificial Intelligence (AI), 5G cells, IoT and computing enterprise.
TDK Corporation expands its Micronas embedded motor controller portfolio with the HVC 4420F, featuring extended flash memory for the drive of small brush-type, stepper, or brushless motors. It is designed to satisfy the latest needs of the automotive industry to provide diagnostics capability newly introduced in the field of smart actuators. Samples will be available in March 2019. Start of production is planned for 2020.
TDK Corporation has announced the introduction of the DRM40 series of DIN rail mount redundancy modules. Two 10V to 30VDC inputs are rated at 20A each and the output at 40A. A 150% peak load capability for four seconds is provided for capacitive and inductive loading. The internal MOSFET reverse current protection devices have a low 200mV drop, reducing voltage losses in the module.
The introduction of the TDK-Lambda brand DRL100 24-1/C2 DIN rail power supply has been announced by TDK Corporation. The C2 model, with a 24V output and delivering 88W of output power, is approved to meet the requirements of US NEC (National Electric Code) Class 2 in accordance with UL1310.
The introduction of the RSKN series of six, ten, 20A and 30A, 250Vac/250Vdc rated EMC filters has been announced by TDK Corporation. A two stage design delivers high attenuation across a wide 100kHz to 100MHz frequency range and provides protection against high voltage input pulses. The general purpose RSKN series is suitable for use in a wide range of industrial and communications applications.
A complete portfolio of VR sensors enabling a new class of highly accurate and affordable all-in-one VR solutions has been launched by TDK Corporation. The key platform components includes the InvenSense ICM-42688 six-axis motion sensor for HMDs, which provides the low noise figure and features high-resolution measurement mode.
The introduction of the TDK-Lambda brand PFH500F 28 high efficiency AC-DC power supplies, has been announced by TDK Corporation. Rated at 504W, the baseplate conduction-cooled module is packaged in a compact 101.6x61mm footprint. Using industry standard PMBus commands, the output voltage and fault management levels can be adjusted (read/write) and product status read back.
It has been announced that TDK Corporation is expanding its Chirp Microsystems ultrasonic product portfolio with Chirp SonicTrack, an ultrasonic six-degree-of-freedom (6-DoF) controller tracking solution for all-in-one virtual reality systems. Chirp SonicTrack is an inside-out tracking system that fuses ultrasonic and inertial sensor data to provide 6-DoF position and orientation tracking of a hand-held controller with sub-millimetre precision over a field of view of over 240°.
It has been announced by TDK Corporation that it is introducing the TDK-Lambda brand DRF960 24 1 DIN rail mount AC/DC power supply, rated at 24V 40A (960W) with a 60A (1,440W) peak for four seconds. The product has a very narrow 110mm width, freeing additional space for other DIN rail mount assemblies.
The introduction of the TDK-Lambda brand DTM110-C8 Class II (no ground wire needed) external power supplies rated at up to 110W output power has been announced by TDK Corporation. Certified to the IEC 60601-1 (medical) and IEC 60950-1 (ITE) standards, the series also complies to the latest EU CoC (Code of Conduct) Tier 2 and US DoE Level VI efficiency standards.
The introduction of 3.3V, 4.2V and 28V output models to the TDK-Lambda brand CUS200LD series of AC/DC power supplies has been announced by TDK Corporation. Rated from 79 to 120W with convection cooling and 99 to 151W when mounted on an aluminium plate for conduction cooling, the series can deliver up to 206W for ten seconds.
The introduction of the TDK Lambda brand 15 and 30W rated CCG-D dual output DC/DC converters has been announced by TDK Corporation. Like the single output CCG15-S and CCG30 S, the products have the industry standard one by one inch footprint and can operate over a wide 4:1 input range.
TDK introduce the TDK-Lambda brand EZA11K-320240 bi directional DC-DC converters, suitable for use with energy storage systems. Rated at 11kW, this 1U high product will operate off a 240 – 400Vdc source from a high voltage grid and provide 150 – 300Vdc for charging lithium ion batteries. When grid power is not available, the converter will seamlessly transition to drawing stored energy from the batteries to deliver DC power back to the grid.
TDK introduce of 1,700W rated models to the TDK-Lambda GENESYS+ series of programmable DC power supplies. These additional units provide the capability of operating from a single phase wide range ac input of 85 to 265Vac, rather than three phase 208/400/480Vac. Applications for these lower wattage supplies include laboratory use as well as component, automotive and aerospace testing, semiconductor fabrication, solar array and battery simulation, plating and water treatment.