HARTING has introduced 19in rack-mount versions of its eCon and mCon 9000 family of managed and unmanaged industrial Ethernet switches. The new units allow up to 10 Ethernet clients to be connected via RJ45 or M12 sockets (D-coding) at the front of the device. The switches are specifically designed for use in industrial environments, and support both Ethernet (10 MBit/s) and Fast Ethernet (100 MBit/s) systems. Line and star topology networks, as ...

The new Han Q2/0 connector from HARTING is a two-pole device designed for single-phase decentralised power-supply applications requiring currents of up to 40 A. Decentralised power supplies based on photovoltaic generation have attracted interest as a means of providing renewable energy in applications such as lighting, signalling and telecommunications. Unlike traditional power-transmission architectures, these systems typically require two-wire...

HARTING has introduced two new families of industrial power supplies to complement its range of Ethernet switches. The pCon 7000 product family, with a high IP 65/67 degree of protection, is designed for distributed applications in harsh environments, while the pCon 2000 is for use in control cabinets.

HARTING has introduced a compliant pin version of its SEK (insulation-displacement connection) latched PCB header series for flat cable applications. Designed around standard 2.54 mm x 2.54 mm (0.100 x 0.100 inch) dimensions, the product range includes all standard sizes from 10 to 64 contacts with straight 4.5 mm compliant pins for a PCB thickness from 1.6 mm up to 3.2 mm.

HARTING has introduced a low-profile unmanaged 8-port Ethernet switch, the eCon 4080-B1, which features a high degree of mechanical integrity for use in rail vehicles and challenging industrial environments. The new switch features an extended operating temperature range (-40°C to +70°C), and incorporates vibration-proof M12 connectors for power supply and Ethernet interfaces. The D-coded M12 Ethernet interfaces are implemented in easy-fa...

Han-Quick Lock(r) from HARTING is an innovative termination technology for industrial interconnection which combines reliability and ease of assembly for applications involving high contact densities.

HARTING has added a new power-transmission module to its Han-Modular industrial connector system. The new Han CD module is ideally suited to use with 3-phase motors and servomotors. The Han CD module incorporates three Han C power contacts (rated at 40A each) and four Han D signal contacts (rated at 10 A each), all with crimp termination. It is suitable for power transmission on three-phase motors where additional signal contacts are required - ...

HARTING has introduced an industrial cabinet outlet that is designed to speed the installation of industrial Ethernet cabling. Featuring a compact form-factor, the module is especially suitable for space-saving assembly in switch cabinets or other items of network distribution equipment. The new unit incorporates two fully screened Category 6 RJ45 outlets, which can be connected via patch cables to active components, other nodes or end-user devic...

Han-INOX from HARTING is a new range of industrial connector housings made of high-grade stainless steel to provide protection against corrosion in applications such as the food & beverage and other processing industries. The new housing offers rugged, corrosion-free, IP 65/67 protected connections to ensure reliable operation in the toughest external environments. Han-INOX is available for connector sizes Han 10B and Han 3A, and is equally suit...

HARTING has introduced a 5-pole M12 connector which uses the company's HARAX easy-assembly IDC technique. The new HARAX M12-L 5-pole device has been designed to meet growing industry requirements for sensor applications where five connections are involved. It is also compatible with industrial bus systems including the thin-cable DeviceNet and the Safety Bus P.

HARTING has published a 36-page catalogue giving full product and application information on the company's comprehensive range of interconnection solutions for outdoor telecom applications. Products covered in the new catalogue are based on HARTING's existing PushPull technologies and Han 3 A housings with the addition of innovative fibre and copper based inserts, including LC fibre-optic connectors in single-mode and multimode options.

HARTING has added a new coaxial connector to its Quintax range of shielded data connectors for industrial applications. The new Han E-Coax is a Quintax connector with one Han-E crimp contact in the coaxial position.

The eCon 9000 and mCon 9000 are industrial Ethernet switches which extend the range of managed and unmanaged Ethernet devices available from the HARTING technology group. Each switch allows up to seven Ethernet clients to be connected via M12 sockets (with D-coding) at the front of the device. Further Ethernet connections can be made over the backplane inside a 19-inch rack.

HARTING has expanded its range of Han Push-Pull connectors with new versions corresponding to variants 4 and 14 as specified in the IEC 61076-3-106 standard. The new connectors are designed for use in industrial automation applications, and variant 14 complies with the requirements of the automation initiative of the German automotive manufacturing sector.

Phoenix Electronics Distribution has received the HARTING 'Specialist Distributor of the Year' Award for 2006 for the second year running. The award was made on the basis of sales growth. Commenting on the award, Doreen Sanderson, HARTING's UK Distribution Manager, said: 'During an excellent year for HARTING Ltd., Phoenix Electronics Distribution has continued its growth of the HARTING franchise through excellent customer service and commitment. ...

HARTING has introduced a family of connector products for outdoor communications installations using the company's established Han Push-Pull and Han3A housings combined with a range of innovative fibre-optic and copper based inserts.

HARTING has introduced a new industrial connector which integrates the company's HARAX rapid termination technology into a 7/8in interface connector. The 7/8in connector interface is used in many newly developed fieldbus modules. It is widely used in the United States, and is becoming increasingly popular in the European market.

HARTING has produced a comprehensive 8-page fold-out selection guide for its ranges of connectivity solutions for the industrial automation IT environment.

A new industrial connector hood with an integrated cable gland has been added to the Han(r) 3A Series from HARTING.

The new M50 version of the Han(r) B hood from HARTING extends the company's established Han(r) range of industrial connectors product range to applications involving larger cable or conduit sizes.