Pentek Introduces NEW Line of 6U VPX Boards Boosting Functional Density and Performance

11th November 2014
Source: Pentek Inc
Posted By : Jacqueline Regnier
Pentek Introduces NEW Line of 6U VPX Boards Boosting Functional Density and Performance

Pentek Inc., today announced the addition of 6U VPX boards to the Pentek product line: the Models 57xxx with one XMC module installed and the Models 58xxx with two XMC modules installed. These products extend the Pentek building block strategy of using Cobalt Virtex-6 and Onyx Virtex-7 XMC FPGA modules on carriers for open architecture industry-standard form factors.

Pentek's 6U VPX boards for data acquisition, software radio and digital signal processing offer flexible, gigabit serial fabric connections for demanding radar, beamforming, communications and signal intelligence applications. These new boards are designed for both lab and rugged environments with deployable conduction-cooling options.

Building Block Strategy for Modules

The 6U VPX Model 57xxx and Model 58xxx boards accommodate either one (57xxx) or two (58xxx) Cobalt or Onyx FPGA XMCs, significantly increasing the functional density of a VPX slot. With the 57xxx versions, users can install their own XMC module in the second site.

Board Connectivity

The 6U VPX boards take advantage of the increased I/O to the backplane by adding optional LVDS lines from the FPGA on each XMC to user pins of the VPX backplane connectors. Optional x4 user-configurable gigabit serial links provide additional interconnect options between the two installed XMC modules and to the VPX backplane.

“Our VPX product strategy leverages our wide range of proven FPGA-based XMCs featuring advanced IP cores and high-performance I/O, all fully supported with development software and FPGA design tools,” stated Rodger Hosking, co-founder and vice-president of Pentek, Inc. “This strategy affords our customers faster delivery and increased performance, while reducing risks and speeding embedded system development.”

Key functions of Pentek’s 23 Cobalt and Onyx XMC FPGA modules can now be extended to 6U VPX systems for data acquisition, software radio and digital signal processing, including:

  • Serial FPDP and LVDS digital I/O
  • A/D converters with sampling rates to 3.6 GHz
  • D/A converters with sampling rates to 1.25 GHz
  • Digital down converters (DDC)
  • Digital up converters (DUC)
  • RF tuners to 4 GHz
  • GSM (Global System for Mobile Communications) channelizers up to 2200 channels

Development Tools and Software Support

Like the existing 3U VPX Model 52xxx and 53xxx series, the new 6U VPX Model 57xxx and 58xxx series take advantage of the same development tools as the Cobalt and Onyx XMCs, allowing programmers to migrate directly between hardware platforms.

The Onyx 6U VPX boards take advantage of Pentek’s GateXpress PCIe Configuration Manager for dynamic FPGA reconfiguration, providing tremendous runtime programming flexibility and security. At power up, the GateXpress manager immediately presents a PCIe target to the host computer for discovery and enumeration, giving the FPGA time to load from FLASH. Once booted, the GateXpress manager offers multiple options for dynamically reconfiguring the FPGA with a new Intellectual Property (IP) image, handling the hardware negotiation and streamlining the loading task.

GateXpress allows the FPGA to be reprogrammed during development or deployment. The system does not have to power down to load IP into the FPGA. For additional security, IP code does not need to be stored in non-volatile memory, preventing retrieval or reverse engineering of IP code if the board falls into enemy hands.

For systems that require custom functions, IP can be developed using the Pentek GateFlow FPGA Design Kit, extending or even replacing the factory-installed functions.

Pentek ReadyFlow drivers and board support libraries are available for Linux and Windows operating systems. ReadyFlow includes example applications with full source code, a command line interface for custom control over hardware, and Pentek’s Signal Analyzer, a full-featured analysis tool that continuously displays live signals in both time and frequency domains.

Pricing and Availability

Pricing starts at $11,995 USD. Options are available for larger FPGAs, serial interface lines, and LVDS FPGA I/O. Delivery is 8 to 10 weeks ARO. The 6U VPX Model 57xxx and 58xxx series are designed for both commercial and rugged environments.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
ELIV 2019
16th October 2019
Germany Bonn World Conference Center