MCUs for multiple motor control

7th October 2016
Posted By : Joe Bush
MCUs for multiple motor control

The MK4 group is the second offering in Toshiba’s TXZ family of high speed, low power consumption microcontrollers that incorporate the ARM Cortex-M core. The new range of microcontrollers allow a single-chip, with a low pin-count (32- to 64-pins), to control multiple motors.

The new MCUs meet the need to reduce energy and save space in motor control applications ranging from home appliances such as washing machines and refrigerators to power tools, ventilation fans, electric bicycles and industrial motion control. 

Until now, driving two motors typically required an MCU in a 100-pin type package. Toshiba’s 64-pin TXZ family products, however, can control two motors thanks to the ability to detect motor position via an integrated, high speed AD converter with a 0.5μs conversion speed.

The new devices are based on the ARM Cortex-M4F operating at up to 80MHz and incorporating a floating point processing unit. As well as the high precision ADC, the devices feature high speed Flash memory with 80MHz operation, a co-processor for Toshiba’s original vector engine, and 3-channel op-amps with selectable gain. Together, they ensure the new products realise efficient motor control while improving the power factor and system control.

Devices in the TXZ family support the RAMScope interface, which can confirm parameters in real time without stopping motors by loading parameters relevant to motor control to RAM. A self-diagnostic function that confirms the reference voltage of the ADC, and a CRC arithmetic circuit that identifies incorrect detection for every read operation of the memory are also incorporated. This supports load mitigation of the software process required for functional safety.

Offering pin counts from 32- to 64-pins, the new devices are available with flash memory capacities from 64KB to 128KB. Communication options comprise UART, TSPI and I2C interfaces, while I/O ports range from 24 to 52. Operating voltage range is from 4.5V to 5.5V. Toshiba’s integrated Advanced Vector Engine Plus (A-VE+) supports vector control and dead-time compensation, while an advanced programmable motor control (A-PMD) circuit delivers 3-phase output and supports 3-phase interleaved PFC.

Products with a wide pitch for flow mounting and a fine pitch for reflow mounting are included in the line-up. Operating temperature is from -40 to 105°C.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Connected World Summit 2019
22nd October 2019
United Kingdom The Business Design Centre, London
Hotspots Specials 2019
24th October 2019
Germany Böblingen, Germany
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham
NOAH Conference 2019
30th October 2019
United Kingdom Old Billingsgate, London