TI's TIDA-00821 reference design is a stackable monitor and protector for use in large format Lithium-ion batteries that provides monitoring, balancing, and communications. Each bq76PL536A-Q1 EVM can manage 3 to 6 cells for Li-ion battery applications. Up to 32 bq76PL536A-Q1 EVM modules can be stacked.

Automotive transportation is undergoing a revolution, as advanced electronics enable the electrification of vehicle engines, as well as increasing automation, safety, comfort and convenience. As a result, these changes make the future of driving look very different from our experiences today. Cities will be filled with self-driven, zero-emission electric vehicles (EVs) that communicate among themselves and ...

The ADS7042 Ultra-Low Power Data Acquisition BoosterPack from Texas Instruments helps you quickly and easily evaluate the industry's smallest 12-bit, 1 MSPS SAR ADC.

This system training from Texas Instruments will guide you through different innovative solutions to design a field transmitter ultrasonic AFE based on the PGA460, MSP430 and TDC1000.

In this video, Texas Instruments show an examination of the trade-offs between package size and heat dissipation, using the LMR33630 Hot Rod QFN and SOIC as an example.

  The LM2936Q ultralow quiescent-current regulator features low dropout voltage and low current in the standby mode. With less than 15μA quiescent current at a 100-μA load, the LM2936Q is suited for automotive and other battery-operated systems.

This automotive door control switch reference design showcases a proof-of-concept solution for an automotive door control switch panel that communicates wirelessly to the door side mirror, window lift and door lock mechanisms. Using TI's automotive qualified BLE + MCU CC2541-Q1system-on-chip solution, this reference design enables cost, weight, and ultimately fuel savings by replacing expensive and heavy cable harnesses.

The TPS7B69xx-Q1 device is a low-dropout linear regulator designed for up to 40-V VI operations. With only 15-µA (typical) quiescent current at light load, the device is suitable for standby microcontrol-unit systems especially in automotive applications. The devices feature an integrated short-circuit and overcurrent protection. The TPS7B69xx-Q1 device operates over a –40 to 125°C temperature range.

Texas Instruments' TPS7B6701-Q1, TPS7B6733-Q1, and TPS7B6750-Q1 devices (TPS7B67xx-Q1) are low-dropout linear regulators designed for up to 40V VIN operations. With only 15µA quiescent current at light load that greatly increases the endurance time of the automotive battery, the devices drive loads up to 450mA. The TPS7B67xx-Q1 family of devices features an integrated short-circuit and overcurrent protection.

Texas Instruments' DRV8801-Q1 provides a versatile power driver solution with a full H-bridge driver. The device can drive a brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple PHASE/ENABLE interface allows easy interfacing to controller circuits. The output stages use N-channel power MOSFETs configured as ½-H-bridges. The DRV8801-Q1 is capable of pea...

Texas Instruments' TPD4E001-Q1 device is a low-capacitance TVS diode array designed for ESD protection in sensitive electronics connected to communication lines. Each channel consists of a pair of transient-voltage-suppression diodes that steer ESD pulses to VCC or GND. The TPD4E001-Q1 protects against ESD events up to ±8kV contact discharge and ±15kV air-gap discharge, as specified in IEC 61000-4-2 international standard.

Texas Instruments' CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2Mbps. Devices with part numbers that include the 'G' suffix are designed for data rates up to 5Mbps, and versions with the 'V' have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level.

Texas Instruments has introduced three new amplifiers with a combination of high speed and high precision, allowing designers to create more accurate circuits for error-sensitive applications. The new devices support more precise measurement and faster processing of a wide variety of input signals in test and measurement, medical, and data-acquisition systems.

This video explains how developers can use IWR mmWave sensors for robust sensing of vehicles and pedestrians in traffic monitoring applications using the traffic monitoring IWR mmWave sensors.

In this video, the AWR1642 mmWave radar sensor detects obstacles such as traffic cones, plastic pipes and grocery carts from places on an automobile that are prone to impact.

TI mmWave sensors can see objects with detailed outlines and classify them.

In this video, Texas Instruments consider the single cell charger systems input considerations and limitations topology options and the pros and cons of power path architecture.

  This TI Design features the DRV8801EVM and the DRV8872EVM. These Evaluation Modules (EVMs) enable an easy-to-use platform to demonstrate the capability and performance of the DRV8801 and DRV8872 motor drivers for power-folding side mirrors. 

  Texas Instruments' integrated circuits and reference designs will help you accelerate the electronic design for automotive door functions through high performance motor drivers and scalability and cost-optimised solutions.   

TI's integrated circuits and reference designs will help you accelerate the electronic design for automotive roof modules through high performance motor drivers, LED drivers and cost-optimised solutions. TI analogue products provide intelligent drive capabilities with enhanced diagnostics, robust power conversion and adjustable outputs.