This family has a low power standby mode with remote wake request feature. Additionally, all devices include many protection features to enhance device and network robustness.
Features
- AEC Q100: Qualified for Automotive Applications
- Device Temperature Grade 1: -40°C to 125°C Ambient Operating Temperature
- Device HBM Classification Level: ±16kV
- Device CDM Classification Level ±1500V
- Meets the ISO 11898-2:2016 and
- ISO 11898-5:2007 Physical Layer Standards
- ’Turbo’ CAN:
- All Devices Support Classic CAN and 2Mbps CAN FD (Flexible Data Rate) and ‘G’ Options Support 5Mbps
- Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
- Higher Data Rates in Loaded CAN Networks
- I/O Voltage Range Supports 3.3V and 5V MCUs
- Suitable Passive Behavior When Unpowered
- Bus and Logic Terminals are High Impedance (no load)
- Power Up/Down With Glitch Free Operation On Bus and RXD Output
- Protection Features
- IEC ESD Protection up to ±15kV
- Bus Fault Protection: ±58V (non-H variants) and ±70V (H variants)
- Undervoltage Protection on VCC and VIO (V variants only) Supply Terminals
- Driver Dominant Time Out (TXD DTO) – Data rates down to 10kbps
- Thermal Shutdown Protection (TSD)
- Receiver Common Mode Input Voltage: ±30V
- Typical Loop Delay: 110ns
- Junction Temperatures from –55°C to 150°C
- Available in SOIC(8) Package and Leadless VSON(8) Package (3.0mm x 3.0mm) with Improved Automated Optical Inspection (AOI) Capability
Discover more here.