B&K Precision

Address:
22820 Savi Ranch Parkway
Yorba Linda
CA
92887
United States of America

Phone: 001 714 921 9095

Fax: 001 714 921 6422

Web: www.bkprecision.com


B&K Precision articles

Displaying 1 - 20 of 31

Improved accuracy and resolution for programmable DC loads

Improved accuracy and resolution for programmable DC loads
  Designer and manufacturer of reliable, cost-effective test and measurement instruments, B&K Precision, has announced their new 8500B series of programmable DC loads, improving upon all aspects of its popular 8500 Series. 
17th June 2019

Battery capacity analyser stores data for up to 50 batteries

Battery capacity analyser stores data for up to 50 batteries
Designer and manufacturer of reliable, cost-effective test and measurement instruments, B&K Precision, has announced the next evolution of the 600 series, with the new 603B. The 603B handheld battery capacity analyser tests six and 12 volt sealed lead acid batteries with capacities up to 100Ah. Test results include voltage, state of charge, and internal resistance.
29th August 2018

Mixed signal oscilloscopes feature 25MHz function generator

Mixed signal oscilloscopes feature 25MHz function generator
  Designer and manufacturer of test and measurement instruments, B&K Precision has announced their latest digital oscilloscope 2560 Series with DSO and MSO models.
22nd March 2018


Affordable mixed signal oscilloscopes boast 1GSa/s sampling rate

Affordable mixed signal oscilloscopes boast 1GSa/s sampling rate
The 2540C series DSO and MSO models are the next evolution of B&K Precision’s T2540 series mixed signal oscilloscopes. The front panel boasts a large 8in. widescreen with 256-level colour gradient, two analogue channels, and logic analyser. The logic analyser software and 16-channel logic probe are included in the initial purchase of MSO models or can be upgraded in the field for DSO models.    
22nd December 2017

Bench power meter boasts bandwidth up to 100kHz

Bench power meter boasts bandwidth up to 100kHz
The Bench power meter model 5335B announced by B&K Precision is a compact, single-phase AC and DC power meter designed for measuring power produced or consumed, and analysing power quality parameters quickly and accurately. The bright 4.3-inch colour display supports simultaneous measurement of up to 12 parameters while the oscilloscope function provides quick view of the measured waveforms.
11th December 2017

8600 series has higher power DC electronic loads

8600 series has higher power DC electronic loads
B&K Precision has announced the expansion of its 8600 Series with the addition of four new programmable DC electronic load models: 8620, 8622, 8624, and 8625. With operating voltage ranges up to 500 V, the new models bring to the series a significant increase in power range from 2500 W to 6000 W and a capability of sinking up to 720 A for high current applications.
23rd October 2017

Programmable AC power supply features amplifier mode

Programmable AC power supply features amplifier mode
  Designer and manufacturer of test and measurement instruments, B&K Precision has announced the 9830 series, a line of programmable, single-phase AC power sources for testing electronic devices during design, service and manufacturing.
10th August 2017

Bench LCR meters feature up to 0.05% accuracy

Bench LCR meters feature up to 0.05% accuracy
The bench LCR meter family at B&K Precision has been extended. Two new models take the family's test frequencies up to 1MHz. The 894 and 895 bench LCR meters provide test frequencies from 20Hz to 500kHz and 20Hz to 1MHz, respectively, and can measure inductance, capacitance and resistance with 0.05% basic impedance accuracy.
24th March 2017

Standard LAN interface adds allure for budget conscious DSO buyers

Standard LAN interface adds allure for budget conscious DSO buyers
The model 2190E bench digital storage oscilloscope (DSO) replaces the 2190D in the B&K Precision portfolio. Offering the same measurement capabilities as the 2190D, the 2190E continues to add more features to the entry-level 100MHz DSO. New upgrades include a higher resolution display and standard LAN interface at no additional cost.
29th November 2016

Hand-held LCR meter offers test frequencies up to 100kHz

Hand-held LCR meter offers test frequencies up to 100kHz
B&K Precision has expanded its 878B and 879B 40,000-count hand-held LCR meters with the addition of a new 100kHz model, the 880. This new portable LCR meter can measure inductance, capacitance, and resistance with 0.1% basic impedance accuracy. Offering many features typically found only in bench LCR meters, the 880 provides test frequencies up to 100kHz, selectable test signal levels, and 4-terminal measurement capabilities.
8th June 2016

DC load module offers 300W x 2 module option

DC load module offers 300W x 2 module option
A new 300W dual-channel DC load module, the MDL302, has been introduced by B&K Precision for use with its modular programmable DC electronic load system, the MDL Series. The MDL302 adds to the six DC electronic load modules already offered in the series ranging in power from 200W to 600W.
7th December 2015

Dual channel DC load module enables 200-600W system range

Dual channel DC load module enables 200-600W system range
B&K Precision has introduced a 300W dual-channel DC load module, the MDL302, for use with its modular programmable DC electronic load system, the MDL Series. The MDL302 adds to the six DC electronic load modules already offered in the series, ranging in power from 200 to 600W.
4th December 2015

AC power sources deliver up to 1500VA

AC power sources deliver up to 1500VA
The 9801 programmable AC power source offering from B&K Precision has been extended with the addition of two new high power AC sources, models 9803 and 9805. The new models can deliver up to 750 VA and 1500 VA respectively, and also measure AC voltage, current, and power parameters. Both sources can operate in a 0-300 V continuous sweep range or 150 V/300 V auto-switching range with adjustable start and stop phase angle control.
19th November 2015

750W-1500W power ranges added to DC electronic loads

750W-1500W power ranges added to DC electronic loads
Four new programmable DC electronic load models, the 8610, 8612, 8614, and 8616 have been added to B&K Precision’s 8600 Series. With operating voltage ranges up to 500V, the new models bring to the series a significant increase in power range from 250W to 1500W and a new offering capable of sinking up to 240A for high current applications.
30th September 2015

LCR meter covers 20Hz to 300khZ frequency range

A 300kHz bench LCR meter, the 891, has been unveiled by B&K Precision. The compact, value-priced LCR meter can measure inductance, capacitance, and resistance with 0.05% best impedance accuracy over a fully adjustable test frequency range of 20Hz to 300kHz. With a 300-point linear and logarithmic sweep function, bin comparator, and versatile remote control interfaces, the 891 is suitable for characterising components in laboratory, quality control and small volume production environments.
23rd September 2015

Programmable DC power supply delivers 3000W of output power

Programmable DC power supply delivers 3000W of output power
The 9115 Series has been extended by B&K Precision with the addition of a new multi-range programmable DC power supply, model 9117. The new instrument can deliver up to 3000W of output power in any combination of voltage up to 80V and current up to 120 A within its power rating.
6th September 2015

'Practical' DC power supplies meet many applications

'Practical' DC power supplies meet many applications
The 9130B Series is a new family of programmable triple output DC power supplies from B&K Precision. The new linear triple output power supply line offers three isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current.
29th May 2015

Programmable AC power source outputs 300VA

Programmable AC power source outputs 300VA
A new AC power source, the model 9801, has been launched by B& K Precision, expanding its AC power supply offerings. This compact 19in. half-rack single-phase AC source outputs up to 300 VA and measures AC power characteristics. Users can operate the AC source in a 0-300 V continuous sweep range or 150 V/300 V auto-switching range with adjustable start and stop phase angle control.
30th April 2015

DC electronic loads offer transient operation up to 25kHz

DC electronic loads offer transient operation up to 25kHz
B&K Precision has added a new product to its range of standalone DC load offerings. The 8600 Series programmable DC electronic loads deliver the performance of modular system DC electronic loads in a compact benchtop form factor. The series includes three models of 150 W - 250 W DC electronic loads that can sink current up to 60 A at wide voltage ranges up to 500 V.
22nd January 2015

Autoranging power supplies offer greater flexibility

Autoranging power supplies offer greater flexibility
Further expanding the company's multi-range programmable DC power supply offerings, B&K Precision has announced the 9200 series. Including four 200-600W models, the series can deliver power in any combination of the rated voltage and current up to the maximum output power of the supply. With voltage and current ranges up to 150V and 25A, these programmable DC power supplies are suitable for electronics manufacturing, R&D, service and repair and education.
18th December 2014


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Girls in Tech | Catalyst | 2019
4th September 2019
United Kingdom The Brewery, London
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
EMO Hannover 2019
16th September 2019
Germany Hannover
Women in Tech Festival 2019
17th September 2019
United Kingdom The Brewery, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris