Amplicon has sealed a new partnership to gain access to the full Belden range which includes hundreds of connectivity and networking products for a variety of markets. Belden were established in 1902 and one of their early customers was Thomas Edison. This prestigious history and vast range of switching hardware, gives Amplicon customers access to over 100 years of combined networking, connectivity and cable expertise and knowledge.

The new 6-in-1 instrument 3000T X-Series oscilloscope from Amplicon has an 8.5in capacitive touch screen, bandwidth ranges of 100MHz to 1GHz, 5GSa/s (2.5GSa/s half channels) sampling rate, 4Mpts memory depth and an update rate of up to 1,000,000 wfm/s, allowing detailed and precise waveforms to be displayed. It allows as much of the waveform as possible to be observed with little blind time, ensuring no important events are missed.

The new Digi Transport WR11, from Amplicon, is a secure, reliable, low-cost HSPA+ cellular connection; it comes with dual SIM card slots providing cellular failover. The WR11 is a complete package, offering dual redundant SIM card for automatic failover, plus Digi SureLink that monitors the connection state to ensure stability. The WR11 also comes with enterprise level software without the enterprise pricing; this allows for routing security, VPN...

Designed specifically for card expansion, the Impact-T 400 tower PC has been released by Amplicon. The device, which expands the company’s Amplicon Impact series, is powered by the Ivy Bridge generation of processors. For optimal heat dissipation, the computer is offered in a lightweight aluminium chassis. 

Amplicon has introduced Keysight Technologies’ N9320B spectrum analyser. It has a 9kHz to 3GHz frequency range and impressive optional features including tracking generator and preamplifier. The low cost instrument allows in-depth testing and analysis while still being a viable solution for many different business sectors such as R&D, QA or university research.

Amplicon has extended its range of Digi AnywhereUSB devices, with the introduction of three new models. The network-attached USB hubs allow USB devices to connect to a PC via existing TCP/IP network infrastructure. Eliminating the need for local host PCs, the USB hubs connect USB devices anywhere on a wired or wireless LAN. The AnywhereUSB devices are, therefore, suitable for hostile or non-secure environments where having a local PC is neit...

Amplicon’s Test and Measurement division has introduced the new Teledyne LeCroy WaveJet Touch; a high performance, low cost oscilloscope with a variety of debugging tools and flexible connectivity. The oscilloscopes come in either 350MHz or 500MHz bandwidth; as well as having an extremely small footprint for easy portability, they come with 2GS/s and 5Mpts long memory.

Amplicon has been listening to customer feedback and requirements and applied the comments to the development of a new series of wide operating temperature panel PCs. The Senses 5300 panel PCs come with three display size options: 10in, 12in & 15in, being versatile and adaptive for up to 99% of SCADA/HMI applications.

Boasting a multitude of features, the ICP DAS WISE-5800 is a user-defined Distributed Ethernet I/O Module designed for remote logic control and monitoring in stock at Amplicon. A built-in web server interface allows users to implement IF-THEN-ELSE control logic operations in just a few simple clicks, eliminating the need for hours of programming and debugging, and ideal for users who are not familiar with programming and coding.

Amplicon is helping to solve the problem of industrial sector laptop computers that are used as a tool for accessing devices but are no longer supplied with an RS-232 interface. As there are still a large number of serial devices being used in the industrial sector this can cause problems when trying to connect to legacy devices.

Packaged in a lightweight, fanless aluminium chassis, designed for optimal heat dissipation, Amplicon’s Impact-E 400 series has been designed with card expansion at its heart. Powered by the Ivybridge processor, the PC allows easy access card expansion. It is capable of housing cards up to 220mm in either PCI and/or PCIe configurations.

Offering long distance communication over copper wires, the ED3101 rugged Ethernet extender has been introduced by Amplicon. Supporting speeds of up to 50Mbps at a distance of 300m and 1Mbps at 1900m, the Ethernet extender features plug-and-play installation using existing copper twisted-pair infrastructure to connect Ethernet devices and networks at high speeds over long distances.

Teledyne LeCroy’s WaveSurfer 3000 oscilloscope is now available from Amplicon. The instrument has a 10.1in. touchscreen display, 4GS/s sample rate, 10Mpts/Ch of long memory and fast waveform update of 130k wfms/sec. Controls are accessed through an intuitive touch screen.

A digital multimeter that helps engineers see their measurement data in new ways, get actionable information faster, and document their results more easily has been introduced by Amplicon. The 34461A from Keysight Technologies features exclusive Truevolt technology that reduces extraneous factors such as noise, injected current and input bias current for increased measurement confidence.

Industrial grade wired modems and routers are the topic of a new product section of the Amplicon website. Many of the modems and routers are new additions to the Amplicon portfolio. They support a wide range of data transmission technologies from broadband ADSL/VDSL to legacy 56k dial-up. Manufacturers include INSYS icom, Digi International and Moxa.

Amplicon has added Agilent Technologies U3606B combined digital multimeter/DC power supplies to its product range.The instrument is an alternative to using a power source for tests on a device under test (DUT) and a multimeter for power measurements. An alternative to using two separate products, the all-in-one unit combines a 5½ digit digital multi-meter and 30 Watt power supply, which operate simultaneously and independently.

The Amplicon Impact-E 300 builds upon the strong foundations of the Impact-E 200, offering reliability, monitored life cycle and road mapped components. Packaged in a light-weight chassis designed for optimal heat dissipation, the Impact-E 300 is a powerful embedded system with full OEM branding options available for the chassis and operating system; resulting in a professional branded unit.

The EDS-G500E series of industrial Ethernet switches has been added to Amplicon's ever expanding switch portfolio. The switches have been designed for use in large-scale networks to converge field applications in extreme industrial environments. 

Amplicon now has the latest USB digital I/O modules from ADLINK, the USB-7230 and USB-7250. These modules are a real alternative to PCI/PCIe based I/O, where there is limited expansion available on a PC motherboard, or for use with laptops and other portable applications.

Amplicon now has available the Agilent B2900A series are compact precision source/measure units (SMUs. They feature up to two-channels with 10 fA/100 nV or 100 fA/100 nV measurement resolution and 210 V, 3 A DC/10.5 A pulse source capabilities. This level of performance is typical found in high end semiconductor device analysers.