Cables/Connecting

Displaying 1 - 10 of 3714

Poke-in connectors for a wide range of LED lighting applications

Poke-in connectors for a wide range of LED lighting applications
  TE Connectivity has unveiled BUCHANAN WireMate ITB (Inverted Thru-Board). These wire-to-board connectors are for use in linear and circular LED modules found in all sorts of commercial and industrial lighting systems.
25th March 2019

D-Subminiature connectors for a broad range of applications

D-Subminiature connectors for a broad range of applications
Lane Electronics has made available several ranges of D-Subminiature connectors suitable for wide variety of applications. Manufactured by Positronic, the ranges include both standard and high density models as well as versions that are environmentally sealed to IP67 and a solution for those that need to terminate fibre optic cables in a D-Sub format.
25th March 2019

Mini cable gland compact solution for Ethernet

Mini cable gland compact solution for Ethernet
The new M12 Mini from PROVERTHA is a compact M12 cable connector for space-saving fieldbus connection. The M12 cable gland has a length of only 44mm with an outer diameter of 16/14 mm. Nevertheless, the connector offers a large cable clamping range of four to nine millimetres. The special all-metal housing ensures effective shielding with high EMC.
25th March 2019


High performance structured cabling system for data processing

High performance structured cabling system for data processing
To more efficiently process the rapidly rising data volumes exchanged in commercial buildings, Legrand has unveiled a new high speed structured cabling offering. With both fibre optic and copper solutions, the new LCS3 system is a high performance and future-proof solution to provide networks with greater reliability, scalability and efficiency. LCS3 represents Legrand’s most advanced structured cabling system to date and is well suited to Local Area Network (LAN) and data centre applications.
25th March 2019

PushPull connector solution for factory automation

PushPull connector solution for factory automation
HARTING has launched a new M12 PushPull metric circular connector solution that is compatible with the needs of factory automation applications. The new connector adds the benefits of fast and easy handling to the existing advantages of PushPull locking technology in a 'Plug and Produce' approach to sensor or control installation.
21st March 2019

Ultra micro power connectors feature design flexibility

Ultra micro power connectors feature design flexibility
Samtec has announced the release of mPOWER connectors - the micro high power solution with design flexibility for power-only or power/signal applications. This 2.00mm pitch power connector system (UMPT/UMPS) features a small form factor while achieving up to 18A per blade. This micro high power system not only saves board space, but also carries extremely high amperage per square inch.
20th March 2019

Pre-wired connectors cut lead times

Pre-wired connectors cut lead times
A range of pre-wired, single-end-terminated cable assemblies based on HARTING’s Han series of connector components is available exclusively at RS Components. The assemblies use a range of commonly used cable and connector combinations to provide a quick and easy way of addressing many basic cabling requirements.
19th March 2019

Rosenberger announces latest acquisition and extends profile

Rosenberger announces latest acquisition and extends profile
Recently, Rosenberger has taken-over the harness maker Holocher & Bauer, Ötisheim / Germany, by 100% and integrated the company into the Rosenberger group under the new name Rosenberger Automotive Cabling GmbH (RAC). Managed by Robert Holocher, RAC will provide customer support and services to existing customers in close cooperation with the Rosenberger headquarters in Fridolfing.
19th March 2019

2.2-5RF connector system and cable assemblies

Molex 2.2-5 RF connector system and cable assemblies deliver high frequency and low passive intermodulation (PIM) in a form factor that is 53% smaller than 4.3-10 connectors. 
18th March 2019

Coaxial connectors designed for automated pick and place

Coaxial connectors designed for automated pick and place
Cambridge Electronic Industries has announced its first range of connectors designed for automated pick and place manufacturing techniques. This range, which is marketed under Rapid ConneXions, includes Right Angled and End Launch, BNC and Micro BNC connectors. The Rapid Connexions range is part of the CoaxVision precision 75Ω brand. All of the connectors within the Rapid ConneXions range are designed for automated placement onto the PCB in rapid assembly and volume production environments.
18th March 2019


Cables/Connecting documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Hannover Fair 2019
1st April 2019
Germany Hannover
The Security Event 2019
9th April 2019
United Kingdom NEC, Birmingham
Ceramics Expo 2019
29th April 2019
United States of America International Exposition Center (I-X Center)
Electronics & Applications 2019
14th May 2019
Netherlands Jaarbeurs Utrecht Hall 7 Jaarbeursplein
Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI