VadaTech has announced the AMC541. The AMC541 couples Xilinx Zynq Ultrascale+ XCZU19EG MPSoC FPGA with the TCI6638K2K communications KeyStone SoC to provide a high performance wireless infrastructure module. Zynq Ultrascale+ XCZU19EG MPSoC FPGA includes embedded Quad-core ARM Cortex-A53 application processing unit, Dualcore ARM Cortex-R5 real-time processing unit, ARM Mali - MP2 GPU.

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC585, an AMC FPGA Carrier with single FMC+ (VITA-57.4) interfaces. The AMC is compliant to AMC.1, AMC.2 and AMC.4 specifications. 

It has been announced that VadaTech, a manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, is releasing two new products based on the Xilinx Zynq UltraScale+ MPSoC (MultiProcessor System on Chip).

VadaTech has announced the AMC587 and AMC588. These modules couple high performance RF front end with an XCVU13P providing signal processing bandwidth at over 20 TeraMACs of DSP compute performance in the compact AdvancedMC (AMC) form factor. OpenVPX versions of these modules are planned for later this year.

VadaTech has announced the AMC588, a wideband transceiver in AMC form factor. The AMC utilises four AD9371 connected to a Virtex UltraScale+ FPGA providing eight transceivers channels. The modules are suitable for SDR, SATCOM, 3G/4G micro and macro BTS, antenna systems, research and instrumentation. The AD9371 supports TDD and FDD operation, with a frequency range of 300MHz to 6GHz covering most licensed and unlicensed cellula...

VadaTech has announced the VT817 and VT819 chassis. The VT817 is a convenient low-cost MicroTCA.4 PCIe Gen3 Expansion solution, providing a flexible and effective method of incorporating MTCA.4 acquisition and control hardware into a PC processing environment. The shelf offers two AMC slots and an integrated MCH. The front panel ports accept PCIe Gen3 inputs from VadaTech’s PCI123 PCIe Gen3 board.

VadaTech has announced the VT882. The VT882 is a 2U MTCA chassis that provides eight extended-size/full-size and/or mid-size AMC slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4 modules. It provides TCLKA, TCLKB, TCLKC and TCLKD as well as FLCLKA to each slot in addition to the JTAG signals. It also contains capability for full redundancy by having a redundant MCH, power modules, as well as redundant cooling units for high availability....

The AMC584 has been announced by manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms. 

  Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the FMC155. The FMC155 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering a small footprint and allowing for general-purpose I/O expansion.

  Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC241. The AMC241 is a 36x36 Cross Bar Switch (CBS) in the AMC form factor which allows any of the 20 lanes from the backplane to be routed to the front.

VadaTech has announced the AMC580. The AMC580 is an AMC FPGA Carrier with Xilinx Zynq UltraScale+ (XCZU19EG) FPGA and dual FMC (VITA-57) sites. The module supports flexible clocking with on-board jitter cleaner, and the FPGA connects to DP0-9 and all FMC LA/HA/HB pairs on both FMC sites. The FPGA has an interface to a single DDR4 memory channel (64-bit wide with ECC) which allows for large buffer sizes to be stored during processing.

  Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech has announced the AMC540.

  Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech has announced the VT988. The VT988 is a TI ADC08B3000 based 16-channel data acquisition platform capable of synchronous sampling 8-bit ADCs at up to 3 GSPS. All input data channels pass through a Virtex-7 485T FPGA which is user programmable for filtering/DDC.

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC583 dual FMC+ carrier and FMC250 ADC/DAC FMC+ module. By increasing the number of SERDES lanes available, FMC+ carriers and modules support higher I/O bandwidth, making improved use of the latest JESD204B-enabled signal conversion products. The AMC583 is an FPGA Dual FMC+ Carrier with Kintex UltraScale X...

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the UTC040C Conduction Cooled MicroTCA Carrier Hub (MCH). The UTC040C includes PCIe Gen3 switch with 1,024Gbps aggregate bandwidth, automatic speed negotiation, and virtual switch (multiple domain, non-transparent port support) to enable partitioning of the system with multiple root complexes.

VadaTech has announced two new ATCA 40GbE Switches (ATC804 and ATC803) based on the Broadcom Trident 2+ switch with an aggregate switching throughput of 1.2 TBit. The ATC804 switch has a simplified architecture, combining the base and fabric switches into a single switch with VLAN separation, thus improving reliability and reducing complexity of the solution. The switch provides dual 100GbE high speed ports, 16 SFP+ and 8 RJ45 ports.

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC350 Quad HDMI/DVI H.264 Encoder. This AdvancedMC (AMC) single-module design encodes full HD to H.264, MPEG-4 and H.263 with throughput up to 1,920x1,088 at 60 frames per second in a compact multi-channel unit. The MPEG4-SP encoder is compatible with the ISO/IEC 14496-2 specification.

  VadaTech has announced the AMC005 Time and Frequency module with on-board GPS. The AMC005 provides a complete, feature-rich, GPS / PTP (1588) / IRIG / NTP bus-level timing solution to MicroTCA and ATCA systems.

VadaTech has announced expansion of the DAQ Series product range in MTCA.4. The DAQ523 provides 12 channels of ADC (AD9653) with 2 channels of DAC (MAX5878) coupled to Xilinx Kintex-7 XC7K410T FPGA and now has options for programmable gain and AC/DC selection, and for optical detection in the 1310 to 1650 nm range.

  A manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the VPX599 and AMC599 ADC/DAC modules.