Companies

VadaTech Ltd

  • Ocean Village Innovation Centre, Ocean Way, Southampton
    SO14 3JZ
    United Kingdom
  • +44 2380 381982
  • http://www.vadatech.co.uk
  • +44 2380 381983

VadaTech Ltd Articles

Displaying 21 - 40 of 110
Design
5th July 2019
6U OpenVPX 10GbE switch with optional health management

VadaTech has announced the VPX007. The VadaTech VPX007 is a versatile 10GbE VPX switch with optional health management. The unit can be configured to have all 10GbE ports routed to the front panel with P1, P2 and P3 unpopulated, or to have 10GbE ports routed to the backplane. The Ethernet switch is managed with an enterprise grade Layer 2 switching/routing stack (which supports Synchronous Ethernet).

Design
14th June 2019
Suite of one slot 3U VPX development chassis announced

VadaTech has announced the VTX980/981/982. These are single slot 3U VPX chassis with 750W AC power supply for board bring-up and testing of 3U VPX modules. The VTX980 has all connectors P0 to P6 installed and routed from front to rear, with optional high performance KVPX connectors. The VTX981 has connectors P0 to P2 installed with options for VITA 66.5 or VITA 66.4. The VTX982 has connectors P0/P1 installed and...

FPGAs
24th May 2019
VITA 57.4 module with 12 TX/RX Fibre MTP/MPO

Manufacturer of integrated systems and embedded boards, VadaTech, has announces the FMC258. The FMC258 is an FPGA Mezzanine Module per VITA 57.4 (FMC+) specification. It has a single Board-Mount Optical Assembly, providing 12 channel full-duplex transceivers with Clock Data Recovery (CDR) and front-panel Fibre I/O via MTP/MPO.

Design
14th May 2019
Optical amplifier/splitter for 6U OpenVPX platforms

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the VPX981. The VPX981 is an optical amplifier/splitter module for use in 6U OpenVPX platforms requiring signal distribution over fibre (VTX350 as an example). 

Design
29th April 2019
AMC with dual high performance host bus adapter

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC243. The VadaTech AMC243 Host Bus Adapter (HBA) is a dual port 40/50/100Gb Ethernet Unified Wire Adapter, with a PCI Express 3.0 x16 host bus interface, optimised for storage, cloud computing, HPC, virtualisation and other datacenter networking applications. 

Design
11th April 2019
AMC with 72 core processor for intelligent networking

Manufacturer of integrated systems, VadaTech, has announced the AMC741, well suited for packet filtering, intelligent networking, multimedia, video transcoding, cloud and other applications. The GX72 device includes 72 identical processor cores (tiles) interconnected with Tilera’s iMesh on-chip network. 

Design
8th April 2019
Rugged chassis with six AMC slots withstands shock

Manufacturer of integrated systems, embedded boards and application-ready platforms, VadaTech, has announced the VT954, a rugged 1U chassis used in Mil/Aero or other applications that need to withstand shock/vibration. The lightweight aluminium chassis construction provides six single module mid-size AMC slots.

Design
3rd April 2019
Dual RF agile transceiver for SDR application solutions

Manufacturer of integrated systems, VadaTech, has announced the VPX571. The VPX571 provides dual agile RF transceivers, each based on AD9364. One channel includes a programmable filter on transmit. The combination of dual AD9364 with UltraScale+ MPSoC provides a complete transceiver solution for SDR and SIGINT applications, supporting both TDD and FDD operation.

Design
15th March 2019
6U VPX chassis with fibre optic I/O

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the VTX350. The VTX350 is a 6U VPX chassis with up to twelve 6U VPX slots and provision for dual power modules ideal for field deployment. The chassis can accept 0.8, 0.85 and 1.0” pitch modules.

Design
11th February 2019
Processor module for general purpose in demanding applications

Manufacturer of integrated systems, VadaTech, has announced the VPX752. The VPX752 is a processor module (VITA 46) for general purpose processing in demanding applications. Based on the Intel 5th generation Xeon-D processor, the efficient SoC design has low power consumption and integrated PCH technology. 

FPGAs
28th January 2019
Module with on-board, re-configurable FPGA

Manufacturer of integrated systems, VadaTech, has announced the AMC575. The AMC575 utilises the Xilinx XCZU29DR RFSoC and is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D. 

FPGAs
17th January 2019
New 3U VPX Virtex UltraScale+ FPGA board announced

VadaTech has announced the VPX570. The VPX570 is a low latency RF ADC/DAC module withADC supporting rates up to 5.4 GSPS and a DAC supporting rates up to 6 GSPS, both at 12 bits. The EV12DS460A and EV12AS350A both have parallel interfaces to the FPGA, avoiding latency associated with serialising/deserialising data. The XCVU13P FPGA has a large 360Mb on-chip UltraRAM which, with the ADC and DAC selection, makes this module suitable for low latency...

FPGAs
7th January 2019
Chassis manager with integrated JTAG switch module

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the VPX980. The VadaTech VPX980 Chassis Manager is based on the VITA 46.11 specification. The VITA 46.11 leverages the Intelligent Platform Management Interface (IPMI) and AdvancedTCA Specification by the PICMG as its architectural foundation. 

FPGAs
12th November 2018
High-speed FPGA compute module for signal processing

  Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the VPX551 high-speed FPGA compute module for signal processing and beamforming applications.

Enclosures
19th September 2018
One slot 6U VPX benchtop development chassis with RTM

Embedded boards and integrated systems manufacturer, VadaTech, has announced the VTX991. The VTX991 is a single slot 6U VPX chassis for board bring-up and testing of 6U VPX modules, the chassis can accept a front and a rear module (five or 10HP). The panels on both the front and rear slots are removable for ease of probing and debugging. 

FPGAs
7th September 2018
FPGA board with TCI6638 multicore DSP+ARM

VadaTech has announced the AMC541. The AMC541 couples Xilinx Zynq Ultrascale+ XCZU19EG MPSoC FPGA with the TCI6638K2K communications KeyStone SoC to provide a high performance wireless infrastructure module. Zynq Ultrascale+ XCZU19EG MPSoC FPGA includes embedded Quad-core ARM Cortex-A53 application processing unit, Dualcore ARM Cortex-R5 real-time processing unit, ARM Mali - MP2 GPU.

FPGAs
17th August 2018
AMC FPGA carrier with ginle FMC+ interfaces

Manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, VadaTech, has announced the AMC585, an AMC FPGA Carrier with single FMC+ (VITA-57.4) interfaces. The AMC is compliant to AMC.1, AMC.2 and AMC.4 specifications. 

FPGAs
30th July 2018
FPGA carrier boards with quad-core ARM application processor

It has been announced that VadaTech, a manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, is releasing two new products based on the Xilinx Zynq UltraScale+ MPSoC (MultiProcessor System on Chip).

Power
16th July 2018
ADC/DAC modules provide signal processing bandwidth

VadaTech has announced the AMC587 and AMC588. These modules couple high performance RF front end with an XCVU13P providing signal processing bandwidth at over 20 TeraMACs of DSP compute performance in the compact AdvancedMC (AMC) form factor. OpenVPX versions of these modules are planned for later this year.

Passives
10th May 2018
An octal wideband transceiver (MIMO) with UltraScale+ FPGA

VadaTech has announced the AMC588, a wideband transceiver in AMC form factor. The AMC utilises four AD9371 connected to a Virtex UltraScale+ FPGA providing eight transceivers channels. The modules are suitable for SDR, SATCOM, 3G/4G micro and macro BTS, antenna systems, research and instrumentation. The AD9371 supports TDD and FDD operation, with a frequency range of 300MHz to 6GHz covering most licensed and unlicensed cellula...

First Previous Page 2 of 6 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2021 Electronic Specifier