LeCroy Corporation, a worldwide leader in serial data test solutions, has expanded its presence in the storage system and SAN development tools markets with the introduction of the SierraFC M8-4, a Fibre Channel 8 Gb/s protocol analyzer. The SierraFC M8-4 is the latest addition to LeCroy’s industry-leading Sierra family of powerful storage protocol analyzer products. Highly portable as stand-alone test systems, the flexible family of Sierra pro...

LeCroy Corporation has extended the power of its WaveMaster 830Zi 30 GHz real-time oscilloscope by providing a simple and fast method to combine two oscilloscopes and provide 4 channels at 30 GHz. This solution is ideal for measurement and analysis of 28 to 56 Gb/s IQ modulated signals where ultra-high real-time bandwidth and four channels is required, or for capture and detailed analysis of other leading edge technologies. The solution is enable...

LeCroy Corporation today announced a significant expansion of its PCI Express 3.0 protocol testing focus with the addition of a new analysis tool. The new software tool, named SimPASS, addresses the pre-silicon simulation and design verification phases of development. SimPASS is based on the existing LeCroy graphical user interface for display and analysis of data traffic, and extends the powerful data traffic analysis capabilities commonly used ...

LeCroy Corporation today announced that it is expanding the popular WaveAce oscilloscope line to include 4 channel models from 60 MHz to 300 MHz and adding a new 2 channel, 40 MHz model. The 4 channel models provide 10 kpts/ch memory and up to 2 GS/s sample rate; the 40 MHz model provides 4 kpts/ch and a sample rate of up to 500 MS/s.

LeCroy Corporation expands its QualiPHY automated serial data compliance test solutions to include support for DDR3 with a full suite of Clock, Electrical and Timing tests as defined by the JESD79-3D JEDEC specification. Immediately available for WavePro 7 Zi and WaveMaster 8 Zi, QualiPHY DDR3 uses the ability of these high-performance oscilloscopes to measure a large number of cycles in a very short period of time. This capability is critical du...

LeCroy Corporation, a leading supplier of serial data test solutions, today announced the first shipments of PCI Express 3.0 Protocol Analyzers in the protocol test equipment industry. The new Summit T3-16 is LeCroy’s fifth generation of protocol analyzers targeted at high speed PCI Express I/O-based applications. The LeCroy Summit T3-16 captures, decodes and analyzes PCI Express bus traffic at data rates up to 8 GT/s per lane on bus widths up ...

NextGig Systems, Inc., a provider of industry leading network connectivity, monitoring and test solutions, announces the signing of an exclusive representative agreement with LeCroy Corporation, a leading supplier of serial data test solutions. The agreement enables NextGig Systems to bring LeCroy's market leading protocol analyzers and exercisers to NextGig Systems development lab customers.

LeCroy Corporation’s PCI Express Decode Annotation for LeCroy oscilloscopes provides new capability for hardware and system engineers to simultaneously understand the physical layer and protocol behavior of high-speed PCI Express serial data signals. The new capability provides a link layer protocol decode for up to four PCI Express signals annotated on the oscilloscope physical layer waveform. It is the first and only oscilloscope-based decode...

LeCroy today announced the launch of QualiPHY SAS-2, the first physical layer transmitter compliance test application for SAS-2, the latest generation of the Serial Attached SCSI standard. The release of this software expands LeCroy’s portfolio of QualiPHY automated serial data compliance test solutions, providing automated control for the SDA 8 Zi series of oscilloscopes to test SAS initiators and targets running at 1.5 Gb/s, 3.0 Gb/s and 6.0 ...

LeCroy Corporation’s PCI Express Decode Annotation for LeCroy oscilloscopes provides new capability for hardware and system engineers to simultaneously understand the physical layer and protocol behavior of high-speed PCI Express serial data signals. The new capability provides a link layer protocol decode for up to four PCI Express signals annotated on the oscilloscope physical layer waveform. It is the first and only oscilloscope-based decode...

LeCroy has announced the launch of a single-source lineup of test instruments to comprehensively support the USB (Universal Serial Bus) 3.0 standard, also known as SuperSpeed USB. The LeCroy USB 3.0 Test Suite is an integrated selection of test instruments that addresses all transmitter, receiver, TDR and protocol tests currently defined in the Universal Serial Bus 3.0 specification.

LeCroy has announced a new line of WaveRunner Xi-A Oscilloscopes. The WaveRunner Xi-A incorporates new X-StreamTM II hardware architecture to increase acquisition and display speed, TriggerScanTM rare event capture technology to improve debug and analysis, a new Spectrum Analyzer option to effectively debug in the frequency domain, and new connectivity and control options with LXI (LAN eXtension for Instrumentation) for automated test systems. Th...

LeCroy Corporation has announced its Voyager verification system, said to be the world’s first protocol analyzer for USB 3.0, also known as SuperSpeed USB. Using custom front-end circuitry developed in conjunction with LeCroy’s 5 Gbps PCI-Express platform, the Voyager analyzer provides simultaneous protocol capture of both USB 2.0 and USB 3.0 signaling. Available with an integrated exerciser option, this sixth generation verification platform...

LeCroy Corporation introduces the WaveAce™ series of digital oscilloscopes that expands its line of portable, affordable and easy to use oscilloscopes in the 60 MHz to 300 MHz range. The WaveAce™ improves troubleshooting and shortens debug time by providing unique features such as long memory, a color display, extensive measurement capabilities, and advanced triggering. A streamlined, time-saving user interface provides quick access to all im...

LeCroy Corporation has announced a complete WaveRunner MXi oscilloscope series with models ranging from 400 MHz to 2 GHz. Designed to be the most capable instruments available in their class, each oscilloscope comes standard with a full set of analysis tools including WaveScanTM, an advanced search & analysis feature; WaveStreamTM, a fast viewing mode; and LabNotebook, a unique tool for documentation and report generation.

LeCroy Corporation has introduced a FlexRay physical layer test package that provides eye diagram mask testing and physical layer measurement parameters. These new capabilities combine with LeCroy’s existing FlexRay protocol trigger and decode tools, to make the WaveRunner Xi oscilloscope the most comprehensive oscilloscope-based solution for FlexRay testing available.

LeCroy Corporation announces the launch of a new 13 GHz Test Solution for next generation serial data standards. Comprised of the SDA13000 Serial Data Analyzer, the D13000PS Active Differential Probe, and a suite of innovative debug and analysis tools, LeCroy’s system goes beyond compliance testing to provide the most powerful methods for next generation serial data bus design, development and debug available today. With a bandwidth of 13 GHz, ...

LeCroy Corporation announces that Roberto Petrillo has been named an Officer of LeCroy Corporation and has been promoted to Vice President of Sales Americas and EMEA (Europe, Middle-East, Africa) extending his responsibilities for EMEA to Americas (North and South America) Sales Region. Roberto Petrillo will report directly to the Chief Executive Officer, CEO, Tom Reslewic in his new role. Roberto Petrillo and the EMEA team have developed and e...

LeCroy has announced a new Serial Data Analyzer SDA3010 (3 GHz bandwidth for data rates up to 1.5 Gb/sec) very competitively priced at EUR 31.990 / GBP 22’010. The SDA3010 makes it easy to accurately and reliably perform measurements on high speed serial data streams. With serial data — both electrical and optical — quickly becoming a dominant form of data transmission, fast and accurate analysis becomes a priority.

The new WaveSurfer 24Xs offers a bandwidth of 200 MHz on 4 chanels with a sample rate of 2.5 GS/s. The standard memory of the WS 24Xs is 4x 2.5 Mpts which can be increased to 4x 10 Mpts with a low cost option. Like all other members of the WaveSurfer Xs family the 24Xs provides a large 10.4” touchscreen display and a user-friendly Windows user interface. Now, the WaveSurfer Xs product line encompasses a range of models from 200 MHz to 1 GHz. Pr...