Teledyne LeCroy

Address:
700 Chestnut Ridge Road
Chestnut Ridge
NY
10977-6499
United States of America

Phone: 845-425-2000

Fax: 845-578-5985

Web: http://teledynelecroy.com/

Teledyne Relays is the pre-eminent provider of switching solutions with design, development, manufacturing and test capabilities. The comprehensive product line covers ultraminiature, hermetically sealed TO5 and CentiGrid® relays, industrial and military solid state relays, coaxial switches and coaxial switch matrix assemblies supporting a wide variety of applications. Teledyne Relays provides solutions for RF and Microwave applications in the test, instrumentation, wireless and communication markets. In addition, Teledyne Relays is internationally recognised in traditional military, aviation and space applications


Teledyne LeCroy articles

Displaying 1 - 20 of 129

Deep toolbox adds more options to oscilloscopes

Deep toolbox adds more options to oscilloscopes
The WaveRunner 9000 Series mixed-signal oscilloscopes from Teledyne LeCroy come with a large, 15.4in. display, bandwidths from 500MHz to 4GHz, and sample rates up to 40GS/s. The oscilloscopes offer a complete collection of serial data debug and validation solutions, making it ideal for embedded system, automotive, and EMC/EMI test applications.
2nd April 2019

Protocol analyser accelerates ADAS development

Protocol analyser accelerates ADAS development
A flexible and robust analyser designed to ease troubleshooting and support the development of complex imaging and detection systems for mobile displays and cameras has been launched by Teledyne LeCroy. The Envision X84 analyser supports both MIPI C-PHY/D-PHY and MIPI Camera Serial Interface (CSI-2)/MIPI Display Serial Interface (DSI-2) in a single platform, providing device designers and system integrators more design flexibility, control and expediency.
5th March 2019

Power analysis software enables insight into system behaviours

Power analysis software enables insight into system behaviours
Teledyne LeCroy has launched its 3-Phase Power Analysis software package, which brings 1-phase and 3-phase static and dynamic power analysis to its HDO8000A, HDO6000A and WavePro HD 12-bit High Definition oscilloscopes. With the 3-Phase Power Analysis software package, R&D engineers can now use Teledyne LeCroy’s 12-bit-resolution oscilloscopes to better understand complex power conversion system and control behaviours and hasten power conversion system-design refinements.
21st February 2019


Test equipment range satisfies all tastes

Test equipment range satisfies all tastes
Teledyne Test Tools is a branded portfolio from Teledyne LeCroy that adds a comprehensive range of test equipment to the Teledyne LeCroy product offering. Teledyne Test Tools (T3) products complement and leverage Teledyne LeCroy’s oscilloscope technology. The brand establishes a one-stop shop for test engineers, developers, and schools looking to satisfy ongoing testing, education, and electronics validation needs efficiently, reliably, and within budget.
5th November 2018

Time-domain reflectometers form basis for test platform

Time-domain reflectometers form basis for test platform
Teledyne Test Tools (T3) is a branded portfolio that adds a comprehensive range of test equipment to the Teledyne LeCroy product offering. T3 products complement and leverage Teledyne LeCroy’s oscilloscope technology and are supported by the Teledyne LeCroy Sales and Customer Care organisations.
27th September 2018

WavePro HD oscilloscopes capture every detail up to 8GHz

WavePro HD oscilloscopes capture every detail up to 8GHz
Teledyne LeCroy has announced the WavePro HD high-definition oscilloscopes, which combine for the first time HD4096 12-bit technology and 8GHz bandwidth for low noise and pristine signal fidelity. With a maximum of 5 Gpoints of fast, responsive, and easily navigable acquisition memory, also an industry first, WavePro HD oscilloscopes also acquire extremely fine waveform details over long periods of time. A deep, powerful toolset quickly exposes underlying system behaviours. 
8th May 2018

WaveSurfer 3000z oscilloscopes have more software

WaveSurfer 3000z oscilloscopes have more software
The new WaveSurfer 3000z oscilloscopes have been announced by Teledyne LeCroy, which expand the existing WaveSurfer 3000 bandwidth range above and below that of earlier models, while also bolstering functionality for power-electronics testing. In addition, the new models provide more processing power and memory.
11th April 2018

Sensor module supports high definition oscilloscope

Sensor module supports high definition oscilloscope
Provider of oscilloscopes, protocol analysers and related test and measurement solutions, Teledyne LeCroy has launched the SAM40 which provides up to 24 input channels for low frequency (sensor signal) acquisition and analysis. It connects to a four or eight channel Teledyne LeCroy 12-bit resolution high definition oscilloscope (HD4096 HDOs and MDAs) to provide Analog+Digital+Sensor (up to 8+16+24 channel) acquisitions.
17th November 2017

Oscilloscope platforms now feature ten times oversampling

Oscilloscope platforms now feature ten times oversampling
Teledyne LeCroy has announced the introduction of the HDO4000A, HDO6000A, HDO8000A, and MDA800A analogue and mixed-signal oscilloscopes. These four high-definition oscilloscope product lines range from 200MHz-1GHz bandwidth and utilise 12-bit HD4096 technology. This technology arrived in 2012 and remains in the market place.
28th March 2017

HV fibre-optically isolated probe targets power electronics designs

HV fibre-optically isolated probe targets power electronics designs
The HVFO high voltage fibre-optically isolated oscilloscope probe has been unveiled by Teledyne LeCroy. The probe adds to other solutions such as the only HV differential probe rated for 1500Vdc common-mode testing. The HVFO is an affordable, optimally designed probe for measurement of small signals floating on a HV bus in power electronics designs.
16th January 2017

Probe measures signal variations on a DC power/voltage rail

Probe measures signal variations on a DC power/voltage rail
Two products have been launched by Teledyne LeCroy: the RP4030 active voltage rail probe and a MIPI System Power Management Interface (SPMI) serial decoder. The RP4030 probe measures small signal variations on a DC power/voltage rail, while the SPMI decoder monitors and correlates SPMI serial bus messages with DC power/voltage rail changes. 
6th December 2016

SPMI decoder combines with oscilloscope for power integrity test

SPMI decoder combines with oscilloscope for power integrity test
Two new products, the RP4030 active voltage rail probe and an industry first MIPI System Power Management Interface (SPMI) serial decoder have been launched by Teledyne LeCroy. The RP4030 probe measures small signal variations on a DC power/voltage rail, while the SPMI decoder monitors and correlates SPMI serial bus messages with DC power/voltage rail changes.
2nd December 2016

High definition technology enhances oscilloscope

 High definition technology enhances oscilloscope
The HDO9000 High Definition Oscilloscopes unveil HD1024 high definition technology that automatically optimises vertical resolution under each measurement condition to deliver 10 bits of vertical resolution. The oscilloscopes combine next-generation MAUI with OneTouch user interface with a big, bright, 15.4-in touch screen. The addition of the HD1024 technology to an exceptionally deep analysis toolbox enables the HDO9000 to easily uncover difficult to find signal abnormalities.
22nd August 2016

HDCP 2.2 support added to handheld analyser/generator

HDCP 2.2 support added to handheld analyser/generator
A new member has been added to the quantumdata 780 series handheld test instruments from Teledyne LeCroy. The new 780E Multi-Protocol Analyser / Generator is equipped with DisplayPort input and output ports making it the only portable instrument capable of testing HDMI, HDBaseT and DisplayPort devices and distribution networks including HDCP 2.2 verification.
29th June 2016

Eye diagrams added to serial trigger, decode solutions

Eye diagrams added to serial trigger, decode solutions
The Serial Data Analysis capabilities for Teledyne LeCroy’s oscilloscope solutions have been enhanced by Eye Diagram capabilities in the new TDME Serial Bus options. The company is offering the widest range of Trigger (T), Decode (D), Measure/Graph(M or G) and Eye Diagram and Physical Layer (E or P) options.
26th June 2016

Portable analyser can test HDMI, HDBaseT devices

Portable analyser can test HDMI, HDBaseT devices
A new member of the quantumdata 780 series handheld test instruments has been introduced by Teledyne LeCroy. The 780E Multi-Protocol Analyser / Generator is equipped with DisplayPort input and output ports making it capable of testing HDMI, HDBaseT and DisplayPort devices and distribution networks including HDCP 2.2 verification.
6th June 2016

One touch gesture control eases oscilloscope set-up

One touch gesture control eases oscilloscope set-up
The WaveRunner 8000 oscilloscopes with bandwidths from 500 MHz to 4 GHz have been launched by Teledyne LeCroy. The instruments deliver an extensive toolbox coupled with a superior user experience to expedite solving debug problems. The WaveRunner 8000 marks the debut of the next-generation MAUI advanced user interface, bringing enhancements to the oscilloscope’s UI. The addition of OneTouch to MAUI makes measurement setup incredibly easy, speeding up dramatically the time to insight into complex signal abnormalities.
5th April 2016

High-speed digital analyser probes offer mixed signal solution

High-speed digital analyser probes offer mixed signal solution
The HDA125 High-speed Digital Analyser launched by Teledyne LeCroy expands the capabilities of its oscilloscope range. The HDA125 digital acquisition system captures 18 channels of digital data at 12.5GS/s. It can be added to Teledyne LeCroy oscilloscopes by means of the LBUS interface architecture.
4th February 2016

Protocol exerciser/analyser tests PCI Express 4.0 designs

Protocol exerciser/analyser tests PCI Express 4.0 designs
A PCI Express (PCIe) protocol exerciser/analyser for testing PCI Express 4.0 designs and products has been introduced by Teledyne LeCroy. The Summit Z416 exerciser/analyser addresses the needs of PCI Express developers by providing high performance 16GT/s traffic generation on devices with link widths up to 16 lanes. In addition to traffic generation, protocol analysis featuring Teledyne LeCroy’s industry-standard CATC Trace and other traffic displays and data reports are available.
9th October 2015

Receiver/oscilloscope combo tests optical signals at 130Gbaud

Receiver/oscilloscope combo tests optical signals at 130Gbaud
The IQS series of Coherent Optical Receivers extends Teledyne LeCroy’s Optical Modulation Analysis (OMA) portfolio, enabling the creation of flexible, modular systems. When combined with Teledyne LeCroy’s LabMaster 10Zi-A oscilloscopes and integrated Optical-LinQ analysis software, the IQS receivers test DP-QPSK and DP-16QAM optical signals at speeds up to 130GBaud.
25th September 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EVS32
19th May 2019
France EUREXPO LYON
Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry