Swissbithas announced the introduction of endurance managed - multi-level cell versions of its successful X-500 Series 2.5'' Industrial SATA solid-state drive. Compared to standard MLC SSDs, Swissbit's EM-MLC SSDs have three to ten times greater endurance while maintaining consistent data retention of up to five years, in line with the JEDEC standard.

Swissbit ajoute de nouveaux membres à sa famille de barrettes mémoires industrielles DDR3 SODIMM compatibles avec le standard JEDEC DDR3L et fonctionnant sous 1,35V. Par rapport aux DDR3, les DDR3L apportent une réduction de la consommation pouvant aller jusqu´à 15%.

Swissbit announces new members of its INDUSTRIAL family of DDR3 SODIMMs compatible with the JEDEC DDR3L standard running at 1.35V. DDR3L will allow an up to 15% reduction in power consumption over DDR3.

The reliability of electronic storage modules is an absolute must in medical technology. However, high innovation pressure and ever shorter lifecycles frequently present a problem for device manufacturers – by the start of production, qualified components are often no longer available on the market. For the optimization of the Dialog+ dialysis system, manufacturer B. Braun Avitum therefore placed its trust in a partner that stands out distinctl...

Increasingly short innovation cycles present many manufacturers with the problem of increasingly short component availability to match. This trend is particularly serious in the storage module market, in which the majority of providers focus on the extremely fast-moving consumer market. By Ulrich Brandt, Head of Business Unit DRAM Products, Swissbit AG, and Roger Griesemer, Hear of Business Unit Flash Products, Swissbit AG.

The new X-500 Series from Swissbit achieves a data rate on SATA II of up to 240MB/sec and an impressive 15,000 IOPS (input / output per second) with 4k random accesses. The high end architecture utilizes up to 8 channels with the most reliable SLC NAND Flash on the market. Special features such as ATA-8, NCQ and TRIM enable higher IOPS and sequential performance providing the best combination of performance and reliability for industrial applicat...

Swissbit presented its brand new X-500 Series Industrial SATA II SSD. The 2.5-storage solution with densities of up to 512 GB combined with a data rate of up to 240MB/sec on SATA II and 15.000 IOPS with 4k random accesses attracted a lot of visitors at the booth. Many attendees, especially from the automotive sector, were looking for reliable storage solutions, because they worry about the data retention and read disturb due to perpetual die shri...

Swissbit AG will be presenting its industrial DRAM and flash storage solutions in all common technologies and formats at the embedded world fair (hall 1, stand 524). Highlight at the stand will be its brand new X-500 Series Industrial SATA II SSD with up to 512 GB. The 2.5”-storage solution combines a data rate of up to 260MB/sec on SATA II and an impressive 15.000 IOPS with 4k random accesses and special features such as TRIM, the ATA security...

With the Industrial SATA II SSD of the X 500 Series, Swissbit AG is extending its successful INDUSTRIAL 2.5 SSD product line. This 2.5-inch storage solution achieves a data rate on SATA II of up to 260MB/sec and an impressive 15,000 IOPS with 4k random accesses. Added to this are such features as NCQ, TRIM, the ATA security set and in-field update.

Swissbit AG has today announced that it will be presenting its industrial DRAM and flash storage solutions in all common technologies and formats at the electronica fair (hall A6, stand 121). One of the highlights will be its brand new X-500 Series Industrial SATA II SSD with up to 512 GB.

In 2011 Swissbit AG sold 50 percent more storage solutions than it did in 2010, which was also a successful year for business. For this reason, Europe's largest independent storage manufacturer has significantly expanded its production and logistics and support services.

The new C-400 series CompactFlash card from Swissbit offers the highest possible level of reliability that is currently available for non-volatile memory. This is achieved through well designed wear leveling, read disturb management and the BCH-ECC (Bose-Chaudhuri-Hocquenghem-Codes) unit, which can correct up to 24 bits per 1024 bytes using a tried-and-tested procedure.

Swissbit extends its industrial family of high performance / high reliability SDRAM memory products by three new 8GB density modules: the 8GB DDR3 SODIMM, the 8GB DDR3 SO-UDIMM with ECC and the 8 GB Registered DIMM. These modules offer highest DDR3 memory capacity on the smallest possible system area and enable applications with high need of main memory running on latest multi- Core CPUs.

At embedded world, in hall 1, booth 516, Swissbit will present its industrial DRAM memory modules in COB (Chip-On-Board) and SMT (Surface Mount Technology), available in DRAM, SDRAM, DDR, DDR2 und DDR3 technology. The Flash industrial products include CompactFlash (CF), CFast Serial Flash, MultiMedia Cards (MMC), Secure Digital Cards (SD), Solid State Drives (SSD) and USB products.

Swissbit is proud to announce an addition to its INDUSTRIAL family of high performance / high reliability SDRAM memory modules, the 4GB DDR2 SODIMM. It offers highest DDR2 memory capacity on the smallest possible system area and enables applications with high need of main memory running on multi-Core CPUs.

Swissbit extends its line of SecureDigital (SD) Cards with the Series S-200µ microSD designed especially for embedded systems and industrial applications. It features high level due to its Lifetime Monitoring functions and Power Loss Protection system, its extended temperature range and long term availability.

Swissbit AG celebrates its 10th jubilee and can look back on 20 years of experience. Founded in 2001 as the result of a management buy-out from Siemens AG, Swissbit has continually expanded its market position since then, and is now Europe’s largest independent producer of DRAM and NAND Flash-based storage products for the global industrial market.

Swissbit announces new variations of its INDUSTRIAL family of DDR3 SODIMMs. In order to increase the heat dissipation and to avoid thermal hot spots on the memory modules in systems with difficult cooling, Swissbit can add an aluminum heat spreader to the existing portfolio of DDR3 SODIMMs. The dual sided heat spreader is attached with a thermally conductive tape and increases the heat dissipating area, thus reducing the critical high case temper...

Swissbit is proud to announce world’s first DDR3 RS-UDIMM (Rugged Small Outline unbuffered ECC DIMM): This small form factor (38 x 67.5mm) memory module has been developed with special focus on rugged industrial and embedded system for tough environmental conditions requiring exceptional resistance to shock and vibration.

Swissbit’s already popular family of INDUSTRIAL SecureDigital (SD) cards has just added a new member. The 8GB S-220 series offers the highest density and performance of all Swissbit SDHC storage cards. As with all Swissbit Secure Digital cards, the S-220 series is specifically designed, manufactured, and tested to withstand extreme environmental conditions.