Companies

Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz is one of the world's largest manufacturers of electronic test and measurement equipment. Our products set standards in research, development, production and service. As a key partner of industry and network operators, we offer a broad spectrum of market-leading solutions for the newest wireless technologies as well as for RF and microwave applications up to 500 GHz.

Rohde & Schwarz GmbH & Co. KG Articles

Displaying 681 - 695 of 695
Analysis
14th May 2010
Wide-ranging ISDB-TB product portfolio from Rohde & Schwarz addresses Latin American broadcast market

Transmitter and T&M solutions from Rohde & Schwarz support the ISDB-TB digital TV standard, which has been adopted by several Latin American countries. Using Rohde & Schwarz transmitters, network operators can cost-efficiently set up and expand their infrastructure. The R&S ETL TV analyzer, for example, is ideal for all required measurements on TV transmitters or cable headends. Manufacturers of broadcasting equipment can rely on the R&S SFU, R&S...

Test & Measurement
8th April 2010
Rohde & Schwarz high-end signal generator performs closed-loop tests in realtime on LTE base station receivers

The R&S SMU200A high-end vector signal generator from Rohde & Schwarz now has an option that supports realtime processing of feedback information in LTE base station receiver tests. Equipped with the R&S SMU-K69 option, the signal generator processes HARQ feedback as well as uplink timing adjustment commands from the base station, and then adapts the LTE signal dynamically in line with the 3GPP TS 36.141 test specification. These tests previously...

Test & Measurement
8th April 2010
New coaxial power sensors from Rohde & Schwarz are the first to perform thermal power measurements up to 67 GHz

Rohde & Schwarz has expanded its extensive range of power sensors by adding two new models to the R&S NRP family. The new sensors are the first on the market to measure thermal power from DC up to 50 GHz and 67 GHz respectively. They are also the only thermal power sensors that can be used even without a base unit.

Test & Measurement
8th April 2010
Rohde & Schwarz and Benetel present femtocell test and measurement solutions ranging from development to production

Rohde & Schwarz and Benetel Ltd. cooperate to supply comprehensive test and measurement solutions for Femtocell Access Points (FAP) from product development through pilot production to mass production. The relationship leverages test and measurement equipment from Rohde & Schwarz with experience from Benetel in test software and custom solutions. The BTS-114RS production test system is the first femtocell test system to utilize parallel RF testin...

Analysis
8th April 2010
Rohde & Schwarz and GMIT join forces for the mobile TV of the future

Rohde & Schwarz and GMIT, both specialists for mobile TV, will strengthen their collaboration in the future. The objective is to give customers access to compatible solutions across the entire product portfolio of the two companies.

Test & Measurement
18th March 2010
R&S CMW270 WiMAX communication tester now also fit for connectivity and initial broadcasting standards

Rohde & Schwarz has designed the R&S CMW270 as a flexible communications tester that can handle applications well beyond classic cellular mobile radio. As a cost-effective solution for development and production, the tester is capable of handling WiMAXTM plus WLAN, Bluetooth®, GPS and various broadcasting standards. With the R&S CMW270, Rohde & Schwarz keeps pace with the trend toward integrated wireless communications solutions in laptops, netb...

Test & Measurement
2nd March 2010
Rohde & Schwarz launches four-port network analyzer up to 67 GHz

The high-end R&S ZVA67 vector network analyzer from Rohde & Schwarz is now also available as a four-port model. This is the first network analyzer on the market to feature four test ports for measurements up to 67 GHz. Its high dynamic range (110 dB at 67 GHz) and output power (6 dBm at 67 GHz) give the R&S ZVA67 the flexibility and performance required for characterizing components and modules in the microwave and millimeter-wave range. It allow...

Test & Measurement
23rd February 2010
R&S CMW500 wideband radio communication tester provides new features for maximum flexibility in development and production

At the Mobile World Congress 2010, Rohde & Schwarz unveiled an extensive package of new features for the R&S CMW500 wideband radio communication tester launched in 2009. All the new features are aimed at delivering maximum flexibility for the mobile radio industry. The R&S CMW500 provides precisely what the customer needs, whether it is RF tests in signaling mode for CDMA2000® (1xRTT and 1xEV-DO), WiMAXTM and GSM, or measurements for implementin...

Analysis
23rd February 2010
Rohde & Schwarz comes to NAB with a comprehensive product portfolio for ATSC Mobile DTV, ISDB-TB and DVB-T2

At the NAB trade show in Las Vegas, Rohde & Schwarz will highlight transmitter and T&M solutions for the ATSC Mobile DTV, ISDB-TB and DVB-T2 digital standards. Rohde & Schwarz recently scored an industry first when it successfully put into operation an ATSC Mobile DTV multiplexer and exciter fully-compliant with the final A/153 Mobile DTV standard at Sinclair Broadcast Group’s WNUV-DT station in Baltimore. The company is also involved in initia...

Test & Measurement
21st February 2010
Verizon Wireless chooses Rohde & Schwarz to provide testing solutions for the certification of LTE devices

Verizon Wireless announced today that the company has selected Rohde & Schwarz as a provider of testing solutions for the certification of devices that will operate on the nationwide 4G Long Term Evolution (LTE) network Verizon Wireless is building on the Upper 700 MHz C-Block spectrum. Rohde & Schwarz will provide test platform solutions which include system simulators, channel simulators and software for automation. Any person or organization c...

Test & Measurement
21st February 2010
Samsung using test equipment from Rohde & Schwarz to produce USB modems for world's first commercial LTE networks

Samsung, the Korean electronics manufacturer, is the first company worldwide to deliver USB modems for commercial LTE networks. To meet its production standards, the company is using test equipment from Rohde & Schwarz.

Analysis
2nd February 2010
Rohde & Schwarz and ASTRI jointly verify Advanced Features of TD-LTE Femto Base Stations

The Applied Science and Technology Research Institute (ASTRI) from Hong Kong has successfully verified its TD LTE Femto base stations using advanced test solutions provided by Rohde & Schwarz. In accordance with the latest 3GPP specification TS36.141, transmitter and receiver characteristics as well as receiver performance under fading conditions must be tested. As part of the verification process, the two companies tested the HARQ and timing-adv...

Analysis
23rd December 2009
Targeting next-generation mobile radio with LTE: Rohde & Schwarz at Mobile World Congress 2010

Rohde & Schwarz will put its T&M expertise on display in Barcelona with its complete product portfolio for new mobile radio and wireless technologies (hall 1, booth 1D33). Solutions for LTE, HSPA+ and WiMAX are available for both manufacturers and network operators and include everything from the measurements required during RF and protocol development through conformance testing, production and network optimization.

Analysis
20th November 2009
Rohde & Schwarz system solution generates phase-coherent multichannel signals for testing radar receivers

At productronica 2009, Rohde & Schwarz presented a flexibly configurable system solution for testing receivers in radar systems. Manufacturers and operators can use this application in development, production and service to simulate phase-coherent multichannel signals. The radar test system generates simple modulated or unmodulated pulse sequences and can also be expanded to a maximum of ten channels to create realistic scenarios.

Analysis
20th November 2009
R&S CMW500 multitechnology production tester now with signaling for GSM, WCDMA and LTE

At productronica 2009, Rohde & Schwarz presented the new signaling mode of the R&S CMW500 for production tests on wireless devices. The wideband radio communication tester simulates a wireless connection and then performs transmitter and receiver measurements. This makes the R&S CMW500 ideal both for signaling and non-signaling tests. Since both test concepts are used in production, the tester is a safe investment for manufacturers. As a flexibl...

First Previous Page 35 of 35 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2023 Electronic Specifier