Companies

Rohde & Schwarz GmbH & Co. KG

Rohde & Schwarz is one of the world's largest manufacturers of electronic test and measurement equipment. Our products set standards in research, development, production and service. As a key partner of industry and network operators, we offer a broad spectrum of market-leading solutions for the newest wireless technologies as well as for RF and microwave applications up to 500 GHz.

Rohde & Schwarz GmbH & Co. KG Articles

Displaying 741 - 760 of 769
Analysis
22nd October 2010
Undeterred by the global economic crisis, Rohde & Schwarz closes the fiscal year with positive results

Despite a challenging economic environment, Rohde & Schwarz closed the past fiscal year (July 2009 through June 2010) with a positive operating result. The group of companies recorded a turnover of EUR 1.3 billion, slightly above the previous fiscal year's level. As soon as the economic crisis took hold, the Executive Board set a course based on rigorous cost management combined with the continued implementation of all growth-promoting measures. ...

Test & Measurement
22nd October 2010
New Rohde & Schwarz frequency converters open up network analysis in the frequency range up to 500 GHz

Rohde & Schwarz has announced the availability of its new R&S ZVA-Z500 frequency converters that enable network analyzers to cover the 325 GHz to 500 GHz range. The T&M specialist is providing a turnkey solution that includes the integration of the converters in applications. The R&S ZVA-Z500 models feature a superior dynamic range and outstanding output power over the entire frequency band, and can be set up completely via the network analyzer i...

Test & Measurement
22nd October 2010
Comprehensive solution package for LTE drive tests from Rohde & Schwarz

Rohde & Schwarz has launched a new version of R&S ROMES, a comprehensive drive test solution for LTE. The software accesses data from the R&S TSMW LTE scanner and the LTE USB test terminal. When performing drive tests for network optimization, test engineers are able to measure the transmission rate and transmission quality at the test point. The LTE test terminals have multiple antennas and support multiple input multiple output (MIMO) transmiss...

Test & Measurement
22nd October 2010
New R&S SMZ frequency multipliers with integrated attenuator deliver precise and adjustable output levels up to 110 GHz

By offering three new frequency multipliers, Rohde & Schwarz is extending the frequency range of microwave signal generators to 110 GHz. The frequency multipliers in the R&S SMZ family are the first on the market to offer users the choice of either mechanically or electronically controlled built-in attenuator options. Rohde & Schwarz designed the multipliers as the perfect complement to the R&S SMF100A microwave signal generator. In addition to c...

Analysis
25th June 2010
Rohde & Schwarz and VDE select the winners of the 2010 Case Study Competition

This year's case study competition was won by the team from the Technical University of Aachen. In cooperation with the German Association for Electrical, Electronic and Information Technologies (VDE), Rohde & Schwarz, world market leader for terrestrial TV transmitters, held its seventh international case study competition. Electrical engineering students from Germany and Singapore were invited to address the topic of digital TV. After proving t...

Test & Measurement
25th June 2010
Fading simulator option for broadcast signal generator R&S SFE from Rohde & Schwarz

The R&S SFE Broadcast Tester from Rohde & Schwarz is now available with the new R&S SFE-K30 fading simulator option integrated. The multistandard broadcast signal generator provides TV and radio consumer equipment manufacturers with all the functions they need for R&D, manufacturing and quality assurance. The compact signal generator is the only ½ 19 device on the market equipped with a modulator that integrates a realtime coder, an integrated b...

Test & Measurement
25th June 2010
Eurosatory 2010: Rohde & Schwarz demonstrated interoperability between radio networks of different forces

Rohde & Schwarz showed its radio access point system at Eurosatory in Paris. This solution can be used to network the various radio infrastructures of branches of the armed forces, forces of different nations, and public safety and security (PSS) authorities with each other.

Test & Measurement
27th May 2010
High performance spectrum analysis with new compact and economical analyzer from Rohde & Schwarz

The compact, economical R&S FSC spectrum analyzer recently introduced by Rohde & Schwarz delivers all of the key characteristics of a professional spectrum analyzer. The R&S FSC handles all basic functions such as RF spectrum measurement and power measurement. With a frequency range starting at 9 kHz and extending to a maximum of 6 GHz, the analyzer is ideal for applications that require a high-quality basic instrument: Simple development tasks, ...

Test & Measurement
14th May 2010
Network management software from Rohde & Schwarz replaces complex individual solutions for monitoring broadcast networks

New network management software from Rohde & Schwarz provides network operators with a simple solution that − for the first time − gives them a central overview of overall transmitter operation across sites. R&S TS4570 monitors all transmitters and monitoring equipment via an SNMP interface and graphically displays them on a computer. Disturbances are immediately detectable on-screen, allowing network operators to respond promptly to ...

Test & Measurement
14th May 2010
Video signal generator from Rohde & Schwarz in combination with Konica Minolta analysis software delivers the most precise TV display measurements on the market

The R&S DVSG digital video signal generator from Rohde & Schwarz is a compact solution for the development and quality assurance of TV sets and projectors. The CS-S10w analysis software from Konica Minolta is now preinstalled on the generator. The software supports the Konica Minolta CS200 and CS2000 – the chromameters/spectroradiometers most frequently used by entertainment electronics manufacturers. The data recorded with the CS200 or CS2000 ...

Test & Measurement
14th May 2010
New monitoring system from Rohde & Schwarz ensures high reliability of DVB-T/H networks at low investment cost

Rohde & Schwarz introduces the R&S DVMS1, a compact monitoring system for DVB-T and DVB-H networks. The R&S DVMS1 simultaneously monitors the MPEG transport stream and the transmitted RF signal. This makes it ideal for use at transmitter sites. The modulation error ratio (MER) is typically measured up to 38 dB, which, for this application, clearly sets the R&S DVMS1 apart from other instruments: Due to the system's high MER measurement range, the...

Test & Measurement
14th May 2010
Cost-efficient R&S UPP audio analyzer family reduces measurement times in production environments

Rohde & Schwarz is introducing a new family of audio analyzers developed especially for use in production. The R&S UPP200/400/800 analyzers are available in two-, four- or eight-channel versions. Multiple analyzers can be cascaded to test as many as 48 analog measurement channels. Due to the analyzers' time-saving capability to perform parallel measurements on all channels, manufacturers of audio equipment of any type can achieve higher throughpu...

Test & Measurement
14th May 2010
R&S ETL TV analyzer from Rohde & Schwarz now also for monitoring, testing and servicing FM audio transmitters

Despite the spread of digitization, network operators continue to rely on analog audio broadcasting and are even further expanding their analog networks. This is why Rohde & Schwarz has enhanced its R&S ETL TV analyzer to cover installation, maintenance and quality testing of FM audio broadcasting transmitters. These capabilities make the R&S ETL the ideal test instrument for service engineers who are responsible for both TV and FM transmitters. ...

Analysis
14th May 2010
Test applications from Rohde & Schwarz ensure trouble-free TV experience in 3D

Viewers will soon be able to enjoy 3D entertainment not only in movie theaters but also at home. New TV sets and set-top boxes that make it possible to reproduce images in 3D are being developed. Rohde & Schwarz offers broadcast equipment manufacturers and broadcast network operators test solutions for implementing the new 3D technology. The R&S SFU, R&S SFE and R&S SFE100 broadcast signal generators are available for the development and producti...

Analysis
14th May 2010
Wide-ranging ISDB-TB product portfolio from Rohde & Schwarz addresses Latin American broadcast market

Transmitter and T&M solutions from Rohde & Schwarz support the ISDB-TB digital TV standard, which has been adopted by several Latin American countries. Using Rohde & Schwarz transmitters, network operators can cost-efficiently set up and expand their infrastructure. The R&S ETL TV analyzer, for example, is ideal for all required measurements on TV transmitters or cable headends. Manufacturers of broadcasting equipment can rely on the R&S SFU, R&S...

Test & Measurement
8th April 2010
Rohde & Schwarz high-end signal generator performs closed-loop tests in realtime on LTE base station receivers

The R&S SMU200A high-end vector signal generator from Rohde & Schwarz now has an option that supports realtime processing of feedback information in LTE base station receiver tests. Equipped with the R&S SMU-K69 option, the signal generator processes HARQ feedback as well as uplink timing adjustment commands from the base station, and then adapts the LTE signal dynamically in line with the 3GPP TS 36.141 test specification. These tests previously...

Test & Measurement
8th April 2010
New coaxial power sensors from Rohde & Schwarz are the first to perform thermal power measurements up to 67 GHz

Rohde & Schwarz has expanded its extensive range of power sensors by adding two new models to the R&S NRP family. The new sensors are the first on the market to measure thermal power from DC up to 50 GHz and 67 GHz respectively. They are also the only thermal power sensors that can be used even without a base unit.

Test & Measurement
8th April 2010
Rohde & Schwarz and Benetel present femtocell test and measurement solutions ranging from development to production

Rohde & Schwarz and Benetel Ltd. cooperate to supply comprehensive test and measurement solutions for Femtocell Access Points (FAP) from product development through pilot production to mass production. The relationship leverages test and measurement equipment from Rohde & Schwarz with experience from Benetel in test software and custom solutions. The BTS-114RS production test system is the first femtocell test system to utilize parallel RF testin...

Analysis
8th April 2010
Rohde & Schwarz and GMIT join forces for the mobile TV of the future

Rohde & Schwarz and GMIT, both specialists for mobile TV, will strengthen their collaboration in the future. The objective is to give customers access to compatible solutions across the entire product portfolio of the two companies.

Test & Measurement
18th March 2010
R&S CMW270 WiMAX communication tester now also fit for connectivity and initial broadcasting standards

Rohde & Schwarz has designed the R&S CMW270 as a flexible communications tester that can handle applications well beyond classic cellular mobile radio. As a cost-effective solution for development and production, the tester is capable of handling WiMAXTM plus WLAN, Bluetooth®, GPS and various broadcasting standards. With the R&S CMW270, Rohde & Schwarz keeps pace with the trend toward integrated wireless communications solutions in laptops, netb...

First Previous Page 38 of 39 Next Last

Featured products

Product Spotlight

Upcoming Events

No events found.
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier