Maxim introduced the MAX11046, an 8-channel, 16-bit simultaneous-sampling ADC. An unique architecture (patent pending) provides an ultra-low-noise, on-chip, negative supply voltage. This innovation achieves true 16-bit performance from a high-impedance bipolar input using only a single positive external supply, and exceeds the regulatory requirements for Class 0.2 (0.2% of 220V) precision mandated by IEC 62053.

Maxim Integrated Products introduces the MAX15041, a synchronous DC-DC converter with integrated MOSFETs in a small 3mm x 3mm package. The built-in MOSFETs offer higher efficiency (93%) than asynchronous solutions, while simplifying design and minimizing EMI. Capable of delivering up to 3A, the MAX15041 is ideally suited for a variety of point-of-load applications including telecom and networking equipment, as well as low-cost consumer products. ...

Maxim has introduced the MAX2657 and MAX2658, which are two tiny, battery-sipping LNAs (low-noise amplifiers) designed for GPS-enabled applications operating in the 1575MHz band. Maxim merges its innovative SiGe BiCMOS process technology and WLP (wafer-level packaging) expertise in these devices, and they improve the performance of GPS receive sensitivity with an ultra-low 0.8dB noise figure. This sensitivity is an improvement over both discrete ...

Maxim has introduced the MAX3625B high-performance, three-output clock generator for Ethernet and Fibre Channel equipment. This device utilizes a low-noise VCO and PLL architecture to generate a high-frequency, ultra-low-jitter (0.36psRMS) clock signal from a low-frequency crystal resonator or reference clock input.

Maxim has announced the MAX16839, a low-cost, high-input-voltage linear HB (high-brightness) LED driver capable of delivering up to 100mA. This device minimizes external component count by integrating a pass element and fault detection. In addition, it allows interoperability of multiple drivers in multistring applications. With its wide input-voltage range (5V to 40V), the MAX16839 provides a cost-effective solution for automotive tail-light, si...

Maxim Integrated Products introduces the DS1874, an SFP+ controller with a digital LDD interface. This device controls and monitors all functions for SFF, SFP, and SFP+ optical modules and fully supports the SFF-8472 standard. The combination of the DS1874 with a MAX3798 or MAX3799 laser driver/limiting amplifier provides a low-cost solution for APC loop control, modulation current control, and eye-safety functionality. This chipset eliminates th...

Maxim has introduced the MAX14550E, a Hi-Speed USB analog switch with a USB host-charger identification circuit to automatically detect portable devices. This device allows a host to charge portable devices even when the host is in standby and cannot enumerate USB devices.

Maxim Integrated Products introduces the MAX9670/MAX9671, +3.3V dual SCART solutions with audio volume control for set-top boxes and A/V receivers that have two SCART connectors. These devices utilize power-saving technologies to achieve the industry's lowest power consumption. Additionally, they integrate Maxim's patented DirectDrive(R) technology* to prevent click-and-pop noise and eliminate the need for costly AC-coupling capacitors on the aud...

Maxim has introduced the MAX3806, a high-sensitivity, high-dynamic-range TIA (transimpedance amplifier) for laser-based distance-measurement applications such as automotive active cruise control, industrial safety curtains, and consumer/construction range finders.

Maxim has introduced the DS1842, a 76V APD bias output stage and current-monitoring IC in a 3mm x 3mm TDFN package. Designed using Maxim's state-of-the-art BiCMOS process, this device integrates a high-voltage (76V) current source and dual current mirrors for monitoring APD current.

Maxim has introduced the MAX14523A/MAX14523B/MAX14523C, a family of adjustable current-limit switches. These overcurrent limiters offer a ±10% accurate current limit that can be programmed from 250mA to 1500mA with an external resistor.

Maxim has introduced the MAX9820, a stereo headphone amplifier designed for portable multimedia devices. This tiny IC employs Maxim's patented DirectDrive architecture to eliminate clicks and pops, as well as the large output-coupling capacitors required by conventional single-supply headphone amplifiers. The MAX9820 also suppresses RF radiation, thus preventing the amplifier from demodulating the coupled noise. This low-cost, compact solution is...

Maxim has introduced the MAX2042, the industry's highest performance, fully integrated, 2000MHz to 3000MHz SiGe passive mixer. Designed specifically for LTE, WiMAX, WCS, and MMDS wireless-infrastructure applications, the MAX2042 delivers an unparalleled combination of linearity, noise performance, and component integration. When configured as a downconverter, this IC provides 36dBm of IIP3, 23.4dBm of IP1dB, 7.2dB of conversion loss, and a 7.3dB ...

Maxim has introducesdthe MAX4940/MAX4940A quad/dual, high-voltage digital pulsers. Providing 2.0A (typ) of output current, these devices can be independently configured to enable unipolar or bipolar pulsing in high-voltage systems from low-voltage logic inputs. Two logic inputs per channel and one independent enable input ensure that the output MOSFETs are turned off to speed ramp times and minimize delays between pulsing modes. To improve image ...

Maxim has introduced the MAX3799, a single-chip VCSEL driver and dual-path limiting-amplifier solution targeted at SFP+ Ethernet and Fibre Channel applications. Fabricated using Maxim's MBiC3 IC technology, this device delivers up to 14Gbps performance, a wide range of programmable receiver and transmitter features, and only 320mW of power consumption. Packing the functions of two chips into one, the MAX3799 provides a low-cost, low-power solutio...

Broadening its industry-leading portfolio of I2C-based ADCs, Maxim introduces the MAX11600-MAX11617 multichannel ADCs with an internal voltage reference. Available in 188ksps, 8-bit (MAX11600-05) and 94.4ksps, 10-/12-bit (MAX11606-17) configurations, this unique family of ADCs provides designers with the most flexibility in selecting resolution, channel count (4/8/12), supply voltage (2.7V to 3.6V/4.5V to 5.5V), and reference voltage (2.048V/4.09...

Maxim has introduced the MAX9617/MAX9618, zero-drift, rail-to-rail operational amplifiers. Packaged in 6-pin SC70 (single) and 8-pin SC70 (dual) packages, these devices deliver outstanding precision and low-noise performance while minimizing solution size. Additionally, the MAX9617/MAX9618 offer best-in-class power consumption to enable a new generation of portable medical devices. The Company's proprietary BiCMOS process technology and patent-pe...

Maxim has introduced the MAX8649, a 1.8A, synchronous, fixed-frequency, DC-DC step-down converter in a tiny, 4mm2 wafer-level package (WLP). This device delivers extremely tight output-voltage accuracy by integrating a highly precise bandgap reference and by minimizing offset errors in the feedback circuit. Fully differential remote sense ensures precise regulation at the load by eliminating the resistive losses associated with PCB trace impedanc...

Maxim has introduced the MAX14502, a Hi-Speed USB-to-SD card bridge that increases read/write speed by up to 40x in portable electronics. This IC bypasses the slow processor of Original (full-speed) USB applications, servicing the data transfer with an integrated processor. The MAX14502 thus eliminates the time-consuming and complicated task of developing a software driver, allowing designers to effortlessly add Hi-Speed USB to their applications...

Maxim has introduced the MAX14502, a Hi-Speed USB-to-SD card bridge that increases read/write speed by up to 40x in portable electronics. This IC bypasses the slow processor of Original (full-speed) USB applications, servicing the data transfer with an integrated processor. The MAX14502 thus eliminates the time-consuming and complicated task of developing a software driver, allowing designers to effortlessly add Hi-Speed USB to their applications...