Fairview Microwave

Fairview Microwave Articles

Displaying 1 - 20 of 88
5th May 2022
Fairview Microwave releases 5G outdoor-rated omnidirectional antennas

Fairview Microwave has released a series of 5G outdoor-rated omnidirectional antennas that cover 4G, 5G, LTE and CBRS bands.

13th July 2021
New TAA-compliant waveguide horn antennas

Fairview Microwave has released a new series of standard gain, waveguide horn antennas that can be used in a wide range of test and measurement, wireless communication, government/military, R&D, and microwave radio systems applications.

12th July 2021
Input protected low noise amplifiers with GaN technology

Fairview Microwave has unveiled a new series of Low Noise Amplifiers (LNAs) that are suited for use in electronic warfare, radar, space systems, R&D, prototype/proof of concept, ECM, microwave radio, VSAT, SATCOM, and test & measurement applications.

12th July 2021
High-power PIN diode switches utilising GaN technology

Fairview Microwave has just debuted a new series of high-power broadband RF and microwave PIN diode coaxial packaged switches that are suited for aerospace and defense, microwave radio, military and commercial communications, VSAT, SATCOM, test and measurement, wireless infrastructure and fiber optics applications.

7th July 2021
RF loads with SMP and SMPM connectors

Fairview Microwave has broadened its selection of RF loads to address a range of applications involving test, R&D, production, commercial and military RF communications systems. Fairview Microwave’s new RF loads provide a maximum power of one watt and connector options that include 1.85, 2.4, 2.92, and 3.5mm, SMP and SMPM.

4th June 2021
Micro-sized EM relay switches offering DC to 26GHz

Fairview Microwave has debuted a new line of micro-sized, surface-mount, single-pole, double-throw, electromechanical relay switches with broadband performance that are suited for a wide range of applications involving high power, switch matrices, and test and measurement systems.

2nd June 2021
Coaxial packaged VCOs for prototype applications

Fairview Microwave has unveiled a new line of Voltage Controlled Oscillators (VCOs) designed to address a wide range of SATCOM, Electronic Warfare, VSAT, ECM, radar, and test and measurement applications.

30th March 2021
SMT noise sources covering 0.2MHz to 3GHz frequency range

Fairview Microwave has just debuted a new series of miniature SMT packaged noise sources that are suited for built-in test equipment, dithering for increased dynamic range of A/D converters and as a source for bit error rate testing.

22nd March 2021
Double ridge waveguide components in a range of sizes

Fairview Microwave has just launched a new line of double ridge waveguide components that are well suited for radar, wireless and satellite communication, and test and instrumentation.

5th February 2021
Flange-style waveguide-to-coax adapters now in-stock

Fairview Microwave has just launched a new line of euro-style flange, waveguide-to-coax adapters that are well suited for radar, satellite and wireless communications, and test instrumentation applications.

27th January 2021
Positive slope equalisers optimise system performance

Fairview Microwave has just released a new line of positive slope equalisers which exhibit a fixed attenuation response that increases linearly over broadband frequencies. These equalisers are ideal in compensating for gain variation and optimising performance in systems where excessive losses may occur at the low end of the frequency band.

5th January 2021
Bi-phase modulators operating from 0.5 to 40GHz

Fairview Microwave has just released a new line of bi-phase modulators covering broad octave frequency bands from 0.5 to 40 GHz. These models use TTL logic to phase modulate data onto an RF carrier signal using two phase shift keying (2PSK). 

26th November 2020
RF circulators/isolators covering range of frequencies

Fairview Microwave has extended its selection of high-performance RF circulators/isolators that are well suited for 5G telecommunication, satellite communication, automotive radars, aerospace applications and point-to-point radios.

2nd October 2020
Fairview Microwave VNA test cables with flex life

Fairview Microwave’s new high frequency VNA test cables display excellent electrical properties such as phase stability of +/- 6° at 50GHz and +/- 8° at 70GHz, as well as VSWR of 1.3:1 at 50 GHz and 1.4:1 at 70GHz.

18th September 2020
Fairview microwave RF hybrid couplers for wide band applications

Fairview Microwave has extended its RF hybrid coupler product line with new models to meet high frequency component demands. These high-performance hybrid couplers are ideal for RF applications requiring an equal split of input and output ports with 90-degree or 180-degree phase shifts while maintaining high isolation between ports.

Test & Measurement
18th May 2020
Double ridge waveguide switches support 40GHz

Fairview Microwave has introduced a new series of double ridge waveguide electromechanical relay switches that perform over broader frequency bands. They are well suited for applications involving electronic warfare, electronic countermeasures, VSAT, radar, microwave radio, research and development, and test instrumentation.

12th May 2020
Relay switches cover frequencies of 6.5GHz to 40GHz

A new series of double ridge waveguide electromechanical relay switches that perform over broader frequency bands has been introduced by Fairview Microwave.

Test & Measurement
11th May 2020
Shorts and shims waveguide sizes are from WR-430 to WR-10

A new series of waveguide shorts and shims that are ideal for use in test and instrumentation, wireless communication, satellite communication and radar applications has been released by Fairview Microwave.

16th December 2019
Frequency dividers with compact SMA connectorised packages

Fairview Microwave has introduced a new line of frequency divider modules that cover broadband frequencies from 0.1 to 20GHz. A comprehensive offering of 28 different models features fixed divide-by-ratios from two to 40. These compact prescalers are well suited for use in frequency synthesiser and phase locked loop (PLL) circuit designs, as well as test instrumentation systems.

16th December 2019
RF surge protectors featuring 4.3-10 connectors

Fairview Microwave has unveiled a new line of coaxial surge protectors created to guard valuable communications equipment from power surges and indirect lightning strikes. Fairview’s new RF surge protectors are offered with either male-to-female or male-to-male 4.3-10 connectors. This product line features low insertion loss, maximum input power as high as 500W and multi-strike capability.

First Previous Page 1 of 5 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Latest global electronics news
© Copyright 2022 Electronic Specifier