TE Connectivity (TE) has introduced an extension of its VAL-U-LOK connector product line that increases the maximum current rating from nine to 13A in the broadly accepted 4.2mm centerline spacing connector system. TE’s new 13A VAL-U-LOK connectors support high current requirements for wire-to-board and wire-to-wire connections in a wide range of applications where power must be connected to a board or subsystem. 

TE Connectivity invites visitors visit its booth - Hall 2B, Booth B32 - at the 53rd Paris Air Show to meet with TE’s aerospace experts and see its latest sensor and connectivity products that enable modern connected aircraft. Today’s aircraft are more connected than ever before in order to make flight more efficient and safer. Pilots and ground crews require more information at faster speeds to manage increasingly ...

Connectivity and sensors solutions provider, TE Connectivity (TE), completed the previously announced acquisition of the Kissling group of companies (Kissling or Kissling Group) on May 24th.

Specialist in connectivity and sensors, TE Connectivity (TE), has begun offering extremely ruggedised X-Code M12 right angle connectors for field assembly in a range of railway applications. The new connectors enable safe and reliable data transmission speeds of 10Gb/s, even in harsh environments. 

TE Connectivity offers an innovative test solution for digital switchgear, including sensors. The ESSAILEC RJ45, part of the ESSAILEC test blocks range, is designed to fit electricity utilities’ requirements for safe and reliable testing. Test operations can be made without opening the switchgear panel door and without changing the wiring.

Specialist in connectivity and sensors, TE Connectivity (TE), has introduced the LUMAWISE Drive LED Holder Type Z50 – DALI-2 series for chip-on-board (COB) LEDs used in track and spot lighting. Designed for 48VDC input, the new holder incorporates DC/DC constant current LED driver functionality into a low profile LED holder enabling lighting designers to develop more compact, cost-effective, and better-looking lighting products.

TE Connectivity (TE) has launched its new Generation Y connectors for high-voltage (HV) automotive battery applications. The product extends TE’s range of Generation Y connectors that can be used in HEV batteries. The Generation Y HV connectors support a signal current range from 4-10.5A and a voltage rating of up to 432V.

  TE Connectivity has introduced its AMP+ HVA 1200 HV Terminal and Connector System. The product is a significant addition to TE’s range of high voltage connectors for hybrid and all-electric vehicles. With the new AMP+ HVA1200 HV terminal and connector system (HVA 1200) automotive manufacturers benefit from a high performance interconnection system for their next-gen vehicles.

Connectivity and sensor solutions provider, TE Connectivity (TE), has introduced SOLARLOK 2.0 connectors. The new products enable photovoltaic system installers to make reliable connections more easily, quickly and cost-effectively. SOLARLOK 2.0 is a field-installable product that uses Insulation Displacement Contact (IDC) technology to create a connection between panels and cables without the need for any specialist tooling. 

Specialist in connectivity and sensors, TE Connectivity (TE), has introduced the IHVA 200, a DC contactor for 200A/110VDC loads, with improved cost-effectiveness and reliability to high-voltage battery charging stations. The contactor incorporates a patented design that does away with the standard charging station approach of using inert gases in a hermetically sealed zone to prevent explosions when an excess current or voltage is applied. 

  TE Connectivity has launched its new Generation Y connectors for High Voltage (HV) automotive battery applications. The product extends TE’s range of Generation Y connectors that can be used in HEV batteries. The Generation Y HV connectors support a signal current range from 4 to 10.5A and a voltage rating of up to 432V.

Connectivity and sensors solutions provider, TE Connectivity (TE), has introduced its new Battery Disconnect Relay 12V (BDR 12V) for automotive high-current applications. The product extends TE's range of high-current (HC) relays that can be used in automotive and industrial applications.

TE Connectivity’s (TE) TRICAN 5V is designed for engine and fuel cell applications that require a low power, digital combination sensor for accurate monitoring and diagnosis in harsh vehicle environments.

A definitive agreement has been signed by TE Connectivity (TE) to acquire the Kissling group of companies, a provider of high- power relays and ruggedised switches used in a range of industries as well as other applications. The transaction is expected to close May 30th, 2019, following the completion of customary regulatory approvals.

Let's create a safer and more productive world.

Specialist in connectivity and sensors, TE Connectivity (TE), will showcase the latest innovations from its end-to-end power distribution, battery control and connectivity portfolio at the Battery Show Europe 2019, May 7th to 9th. Visitors to Booth #940, will see product demonstrations, take part in a program of TechTalks and interact with experts in the areas of hybrid and electric mobility technology.

Specialist in connectivity and sensors, TE Connectivity (TE), is cooperating with fellow connector producer HARTING to set Single Pair Ethernet (SPE) as the de facto infrastructure to enable the Industrial Internet of Things (IIoT). The two companies will together drive solutions that define the infrastructure for SPE. 

Specialist in connectivity and sensors, TE Connectivity (TE), recently released its new line of rugged AMPLIMITE D-subminiature (D-sub) connectors that put the same corrosion resistance of connectors made with cadmium into an environmentally-friendly, stainless-steel housing.

Specialist in connectivity and sensors, TE Connectivity (TE), has introduced a new compact connectivity solution for street lighting with LED light sources. TE´s LUMAWISE Endurance S module consists of a standardised interface (Zhaga Book 18) between the receptacle and module base or sealing cap. 

  TE Connectivity has unveiled BUCHANAN WireMate ITB (Inverted Thru-Board). These wire-to-board connectors are for use in linear and circular LED modules found in all sorts of commercial and industrial lighting systems.