TE Connectivity UK Ltd

  • Merrion Ave, Stanmore, Middlesex
    HA7 4RS
    United Kingdom
  • 01793528171
  • +44-208-954-6234

TE Connectivity UK Ltd Articles

Displaying 41 - 60 of 544
29th January 2020
Safety torque sensor for integrated functional safety in cobots

To address the growing demand for safe collaborative robots in manufacturing, TE Connectivity (TE) has designed a safety torque sensor with integrated and improved functional safety, including increased accuracy and speed, in the next generation of human-robot collaboration. 

14th January 2020
Sensor is resistant to water and chlorine

Miniaturisation, performance and precision are key for sensors embedded in consumer devices like swim watches and diving equipment, therefore creating a growing need for high-performing and exceptionally precise sensors. To address this growing demand, TE Connectivity (TE) has released the MS5839-02BA, an ultra-compact, chlorine resistant digital pressure and temperature sensor.   

9th January 2020
Rugged cable reduces corrosion potential in space applications

TE Connectivity (TE) has launched the SPEC 55 low fluoride (55 LF) wire and cable insulation system for space and high altitude environments. Made from rugged fluoropolymer, TE’s SPEC 55 LF insulation system has an outgassing rating of less than ten PPM, which helps reduce the potential for corrosion of other components due to trapped gases escaping in a vacuum or low-pressure environment.

8th January 2020
P-Clamps offer improved flexibility and install time

TE Connectivity (TE), a world leader in connectivity and sensors, introduced its new P-Clamps with lock and mounting features that offer engineers the flexibility to rethink the way electrical and fluid systems are configured. Engineered with separate mounting and locking features, TE’s P-Clamps can be installed earlier in the assembly process compared to standard AS21919 P-Clamps.

7th January 2020
M8/M12 cable assemblies feature Fieldbus protocols

TE Connectivity is introducing new M8/M12 cable assembly solutions for Fieldbus data communications, complementing its existing Sensor/Actuator cable assembly solutions for Industrial Networks. The new A and B-coded M8/M12 cable assemblies comply with Profibus, DeviceNet and CC-link protocols, offering multiple options for a variety of needs.

12th December 2019
HL low fire hazard markers designed for harsh environments

TE Connectivity (TE), has announced that it now offers HL Low Fire Hazard cable markers designed to identify large-diameter wire and cable, as well as post-connector installation within harsh environments. Identification print is guaranteed when using TE’s WINTOTAL software in conjunction with the recommended ribbon and thermal transfer printers.

10th December 2019
Thermal bridge solution significantly improves resistance

TE Connectivity (TE) is introducing its thermal bridge technology that can provide up to two times better thermal resistance over traditional thermal technologies such as gap pads or thermal pads. As systems like servers, switches and routers deliver higher speeds and grow more sophisticated, their power requirements are rising, leading to a need for new solutions that can handle more heat.

6th December 2019
Sensors in sports: Connected home to prepare for game day

In this video, TE Connectivity share some connected home pre-game prep tips.

4th December 2019
Shielded connectors expand harsh environment capabilities

TE Connectivity is extending its time-tested 369 connector series with the introduction of the new 369 shielded rectangular connectors for environments that demand ambient EMI noise protection. These connectors incorporate the benefits of the 369 series, which is qualified for use in a wide range of commercial aerospace applications, with EMI shielding that opens up new application possibilities.

25th November 2019
Connectors support data rates up to 28Gbps NRZ

TE Connectivity (TE) has introduced its new zSFP+ stacked belly-to-belly connectors that are designed to support data rates at both 28G NRZ and 56 Gbps PAM-4. The upright latching feature for zSFP+ stacked belly-to-belly connectors is a key capability that can accommodate four row belly-to-belly applications to enable higher faceplate density and maximise PCB space usage for hyperscale data centres and networking switch applications.

20th November 2019
Connector ecosystem for sensor and control system applications

TE Connectivity (TE) is building on its LUMAWISE Endurance S Zhaga Book 18 streetlight connectors to create an entire certified ecosystem of products designed for sensor and other control system applications. The original connectors enable Zhaga-D4i certification for luminaires, makes connectivity future-proof and will be able to host the latest generation of nodes that fulfil the Zhaga-D4i requirements.

20th November 2019
Connectors with 2mm centerlines for board signal transfers

TE Connectivity (TE) has expanded its range of AMPMODU interconnection solutions with the introduction of 2mm centerline board connectors. These new connectors occupy 38% less space than traditional 2.54mm centerline products, while reliably and economically meeting the packaging and inter-connection requirements of today's miniature, sophisticated electronics. 

15th November 2019
PCIe Gen 4 card edge connectors support speeds up to 16Gbps

TE Connectivity (TE) has introduced its new PCIe Gen 4 card edge connectors, which meet industry PCI-SIG Card Electromechanical (CEM) specification 4.0 and support Intel and AMD next-generation platforms with up to 16 Gbps of bandwidth. 

5th November 2019
Transportation safety improved with unsealed connectors

Offering improved safety and ease of assembly, TE Connectivity (TE) has launched a new addition to its unsealed connector portfolio for the transportation industry. The AMP MCP 18P monoblock connector offers trust and reliability in harsh environments for industrial and commercial transportation with its flame retardant composition and new lever design. 

15th October 2019
Industrial managed M12-based Ethernet switches for rail applications

It has been announced that TE Connectivity (TE) now offers EN50155 Managed Ethernet switches that enable secure and reliable Gigabit-speed networks in harsh network environments on railway rolling stock, even where vibration levels are extreme.

14th October 2019
PCB connector portfolio expanded with push-in clamp termination style

TE Connectivity (TE) is expanding its BUCHANAN PCB Connector portfolio with maintenance-free push-in clamp termination. TE’s products come with low insertion and release forces for ferruled wires and unferruled solid wires without the need for special tools. The tool-less design reduces installation times up to 80% compared with traditional screw clamp termination.

11th October 2019
Identification software to simplify printing on heat-shrink sleeves

TE Connectivity (TE) has updated its wintotal software, designed to simplify printing on heat-shrink sleeves, cable markers and labels. Used in conjunction with TE hardware (product, printer and ribbon), Wintotal v7 creates a high-quality identification asset that can be used in harsh environments. It replaces wintotal v6.

9th October 2019
TE Connectivity and Nikola are changing the trucking industry

When you’re leading a revolution in the trucking industry, you don’t want to go at it alone. Nikola Corporation has set out to reduce the environmental impact of the trucking industry with its zero-emission hydrogen-electric vehicles. To solve for the connectivity challenges this new technology brings, Nikola has partnered with TE Connectivity, a world leader in connectivity and sensors.

3rd October 2019
Improving transport industry’s safety with new unsealed connectors

Offering improved safety and ease of assembly over other industry models, TE Connectivity (TE) has launched a new addition to its unsealed connector portfolio for the transportation industry. The AMP MCP 18P monoblock connector offers trust and reliability in harsh environments for industrial and commercial transportation with its flame retardant composition and new lever design. 

2nd October 2019
Power connectors supporting next-generation power needs

TE Connectivity (TE) has introduced MULTI-BEAM Plus connectors, the latest evolution of its power connector line. MULTI-BEAM Plus connectors share the same low-profile dimensions and enable the same through-system airflow as previous designs such as MULTI-BEAM XL, MULTI-BEAM XLE and MULTI-BEAM HD power connectors.

First Previous Page 3 of 28 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Latest global electronics news
© Copyright 2021 Electronic Specifier