• 155 Swanson Road Boxborough,
    MA 01719
    United States of America
  • 1 978 849 0600
  • 1 978 849 0602

SynQor Articles

Displaying 1 - 20 of 47
Aerospace & Defence
2nd April 2019
Converters designed to meet DO-160G specifications

Especially designed for commercial avionics, SynQor has announced its new AeroQor product line, composed of next generation, high efficiency, isolated power factor correction modules (APFIC) and AC filters specifically designed to meet the most stringent commercial airline specifications (RTCA/DO-160G, Boeing and Airbus).

26th June 2013
SynQor releases 700W Half-Brick Power Factor Correction Module

SynQor announces the release of its PFCQor module, a power factor correction building block for AC-DC power conversion. When the PFCQor is used with SynQor's AC line filter, a hold-up capacitor and SynQor's high efficiency DC-DC converters, it draws a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input and provides a complete front-end system that complies with EN55011, EN55022, EN61000 and FCC regulations.

3rd April 2013
SynQor Commences New Patent Suit Against Cisco

SynQor announced today that it filed a new patent infringement lawsuit on March 22, 2013 against Cisco Systems in the Eastern District of Texas. SynQor v Cisco Systems, Civil Action No. 2:13-cv-00232 E.D. Texas.

21st March 2013
SynQor Prevails in Appeal of Patent Litigation

In a unanimous decision authored by Chief Judge Rader, the U.S. Court of Appeals for the Federal Circuit in Washington D.C. affirmed the decision of the US District Court for the Eastern District of Texas and upheld a $95M jury verdict previously won by SynQor, as well as the Court's additional award of supplemental damages and sanctions.

6th September 2012
Military COTS 270Vin DC-DC Full-Brick Converters Power up by 33% to 800W

SynQor has today revealed that it has increased the maximum rated power level of its 270Vin MCOTS line of full-brick DC-DC converters by raising the lower end of the input voltage range over which they can operate. The new MCOTS-270H line of full-brick converters can deliver 800W of output power while operating over a continuous input voltage range of 240V – 425V and a transient input voltage range of 240V – 475V.

12th July 2012
SynQor Medical DC-DC Converters & Power Suuplies TÜV/SÜD Certified

SynQor have announced that their FQor DC-DC converter series and ACuQor E Series and ACuQor G Series power supplies have been certified by TÜV/SÜD to be compliant to the latest required IEC60601:2005 (3rd edition) standards.

30th April 2012
SynQor Reaches Bus Converter License Agreement with HP

SynQor, Inc. today announced that it has reached a license agreement with HP that allows HP to purchase bus converters from designated suppliers. In December 2010, SynQor prevailed before a jury in the Eastern District of Texas in a patent infringement suit against numerous suppliers of unregulated and semi-regulated bus converters used in intermediate bus architectures.

4th November 2011
SynQor Introduces a New Line of Advanced Technology Military-Grade UPS Units

SynQor, Inc., announces a new line of Military-Grade Uninterruptible Power Supply units that are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor's UPS incorporates field proven high efficiency designs and rugged packaging technologies.

20th May 2011
SynQor and Ericsson Settle Patent Litigation

SynQor announced today that it has entered into a definitive Settlement Agreement to resolve its pending litigation with Ericsson Inc. In January 2011, SynQor filed suit against Ericsson, among others (SynQor, Inc. v. Ericsson Inc., Cisco Systems and Vicor Corporation, Civil Action No. 2:11-CV-54-TJW-CE) in the Eastern District of Texas for alleged infringement of SynQor's family of patents relating to bus converters and intermediate bus archite...

20th May 2011
SynQor Reaches Agreement with Fujitsu in Bus Converter Litigation

SynQor, Inc. today announced that it has reached a partial settlement and license agreement with Fujitsu Limited (Kawasaki, Japan) and its wholly-owned subsidiary Fujitsu Network Communications, Inc. (Richardson, Texas).

23rd December 2010
SynQor Prevails in Patent Litigation

SynQor, Inc. today announced that it has prevailed in its patent litigation suit against industry suppliers of unregulated and semi-regulated bus converters used in Intermediate Bus Architecture applications (SynQor, Inc. v. Artesyn Technologies, Inc. et al). SynQor asserted 5 patents against 11 of the largest industry suppliers of unregulated and semi-regulated bus converters in the US District Court for the Eastern District of Texas. In a unani...

1st March 2010
SynQor Extends its Range of Medical High Efficiency DC-DC Converters

SynQor announces the expansion of its family of medical grade products. The CFQor dc/dc converters are designed to provide isolated dc power for applications requiring CF Body Contact and Defibrillation Pulse withstand capability as specified in EN60601. These fixed-switching frequency converters use SynQor’s synchronous rectifier based technology to achieve extremely high-efficiency. The CFQor quarter-brick series delivers 105W from a nominal ...

21st February 2010
SynQor Introduces 28Vin DC/DC Converters to the Mil-COTS Market

SynQor announces the release of its Mil-COTS 28 series of isolated dc/dc converters, expanding its MilQor offerings for the Military and Aerospace industries. These “off-the-shelf” converters operate from an input voltage of 16V to 40V continuously and will withstand 50V transients for up to 1 second, meeting MIL-STD-704D input voltage range requirements. Designed for cost sensitive Mil-COTS applications, these ruggedized, encased packages en...

26th November 2009
SynQor Expands its Portfolio of Semi-Regulated Bus Converters

SynQor announces the release of several new entries in its SQ60 series, expanding its BusQor family of isolated semi-regulated dc-dc converters for intermediate bus architecture applications. The SQ60 series accepts the full Telco input range of 36-75V and provides a semi-regulated 12V for point-of-load converters. These converters incorporate next-generation, board-mountable, fixed switching frequency technology, and use synchronous rectificatio...

2nd October 2009
SynQor - Quarter Brick DC-DC Converter Series for Railway Applications

SynQor has announced the InQor IQ72 series of quarter-brick dc-dc converters. These ruggedized next-generation, board-mountable, isolated, fixed switching frequency industrial dc-dc converters use synchronous rectification to achieve power conversion efficiencies up to 91% at full load. Each module is supplied completely encased to provide protection from harsh environments. The 42-110V input voltage range and the broad selection of output voltag...

15th September 2009
SynQor - 28V DC/DC Converters for Military Applications Offer Extended Input Range

SynQor has announced the addition of the new MQFL-28V product family to its portfolio of Hi-Rel dc/dc converters. Incorporating SynQor’s field proven high-efficiency synchronous rectifier technology, this advancement results in the only wide range input dc/dc converters developed specifically for the Military/Aerospace industry. To ensure survivability in the most hostile environments, the MQFL-28V series of 100W dc/dc converters is housed in f...

1st September 2009
SynQor Develops Family of Sixteenth-Brick DC-DC Converters

SynQor has developed a new line of PowerQor Mega series, sixteenth-brick dc-dc converters. The PQ60xxxSMx series of dc-dc converters is an efficient yet economical power solution composed of next-generation, board-mountable, isolated, fixed switching frequency dc-dc converters which are particularly useful for telecom and other low power applications.

18th August 2009
SynQor Establishes Benchmark with Super-Wide 8:1 Input Range DC/DC Converters

SynQor’s claims its IQ64 family of industry-standard half brick dc/dc converters establishes a new performance benchmark with a super-wide 8:1 input voltage range of 18-135V, which doubles the existing ultra-wide 4:1 input ratio standard. With one converter designers can now simultaneously satisfy EN50155 requirements for 36V, 48V and 72V railway systems. The IQ64 family uses SynQor’s patented two-stage topology with a constant mid-bus voltag...

4th August 2009
SynQor - 270V DC/DC Converters Provide 120W of Power While Reducing Dissipated Heat 50%

SynQor has expanded its MilQor product line of 270V input dc/dc converters and complementary EMI filters which have been designed specifically for high-reliability applications. The MQFL-270 series of dc/dc converters utilizes SynQor's field-proven, high-efficiency synchronous rectification technology to achieve breakthrough efficiency levels in excess of 88%.

4th August 2009
SynQor Releases Full Portfolio of DC/DC Solutions for 12V Battery Systems

SynQor announces the release of the IQ12 series, expanding its InQor family of isolated dc-dc converters for industrial and transportation applications using 12V battery systems. Available as standard products, the IQ12 converters accept an input range of 9-22Vin, exceeding the requirements of EN50155 for both steady state and transient voltage conditions in 12V railway systems. IQ12 converters incorporate next-generation, board-mountable, fixed ...

First Previous Page 1 of 3 Next Last

Featured products

Upcoming Events

View all events
Latest global electronics news