Companies

Honeywell

Honeywell Articles

Displaying 81 - 99 of 99
Sensors
15th December 2009
SS345PT/SS445P - Unipolar Hall-effect Digital Position Sensors

Honeywell has announced two Hall-effect digital position sensors - the SS345PT and SS445P Unipolar Hall-effect Digital Position Sensors - that reduce total system cost for customers by having built-in pull-up resistors, eliminating the need for customers to purchase an external pull-up resistor.

Communications
15th December 2009
Honeywell - Position Sensors with 75 mm Linear Configuration

Honeywell has introduced the SMART Position Sensor, 75 mm Linear Configuration, said to be the most accurate linear position sensor available in the industry (0,05 mm [0.002 in]), enabling highly accurate motion control, and improving operation efficiency and safety. Its simple, non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime.

Test & Measurement
9th December 2009
Honeywell and National Instruments Collaborate on Easily Configurable Test and Measurement Systems

Honeywell and National Instruments today announced their collaboration on test and measurement systems that offer plug-and-play compatibility between Honeywell sensors and National Instruments data acquisition instrumentation.

Sensors
9th November 2009
Omnipolar Hall-Effect Magnetic Position Sensors

Honeywell has announced the SS351AT and SS451A Omnipolar Hall-Effect Digital Position Sensors that can be operated by a North pole or a South pole, eliminating the need for the magnet polarity to be identified, which simplifies installation and can reduce system costs.

Communications
15th September 2009
Ultra-Low Silicon Pressure Sensors

Honeywell has expanded its industry-leading ASDX Series silicon pressure sensor portfolio with ultra-low pressure ranges that include 0 to 10 inches of H2O gage, ± 10 inches of H2O differential, and ± 5 inches of H2 O differential. These sensors include additional signal conditioning integrated within the product, allowing customers to remove components associated with signal conditioning from their PC board to free space and reduce costs norma...

Communications
15th September 2009
Unipolar Hall-Effect Digital Position Sensors

Honeywell has announced new Unipolar Hall-Effect Digital Position Sensors, the SS340RT and SS440R Series, that include an SOT-23 subminiature surface mount package, built-in reverse polarity protection, and a low 3 Vdc capability. The new devices will occupy less space on a printed circuit board (PCB) than other Honeywell Hall-effect sensors, can simplify installation, and can protect the device from damage when mounted on the PCB.

Passives
15th September 2009
Video from Honeywell: MICRO SWITCH Technology in Basic Switches

Honeywell Sensing and Control has added a new video to its library of Dr. Larry informational videos on its website (www.honeywell.com/sensing ). The new video on MICRO SWITCH technology demonstrates how basic switches work, and what to look for in a high-quality electromechanical switch.

Sensors
15th July 2009
Silicon Pressure Sensors provide industry-leading total error band specification

Honeywell has introduced its TruStability Silicon Pressure Sensors comprised of the HSC (High Accuracy Silicon Ceramic) Series and SSC (Standard Accuracy Silicon Ceramic) Series that offer customers key benefits not found in other silicon pressure sensors currently available.

Sensors
15th July 2009
Bipolar Hall-Effect Magnetic Position Sensors

Honeywell has introduced its SS30AT Bipolar Hall-Effect Magnetic Position Sensor, a subminiature SOT-23 surface mount package that takes up less space on the printed circuit board (PCB). Honeywell has optimized the size of the integrated circuit, saving on manufacturing costs while still meeting customer requirements. These cost savings result in lower costs to customers. Available on tape and reel, the SS30AT often allows for automated pick-and-...

Sensors
15th July 2009
Honeywell - Small Force Sensors

Honeywell has introduced its smallest force sensor, the FSS-SMT Series, a low profile surface mount device that allows for automated assembly on a printed circuit board (PCB), often eliminating hand soldering and helping to reduce assembly costs. Cost-conscious customers will be attracted to the FSS-SMT Series because it provides all four points of the Wheatstone bridge sensing element that gives them the flexibility to customize and integrate th...

Sensors
8th June 2009
Streaming Video Highlights Applications and Capabilities of Honeywell's SMART Position Sensor

To better inform engineers of the advantages of using its SMART Position Sensor, Honeywell has added a streaming video demonstration of these new sensors to its Web site (www.honeywell.com/sensing ). The video highlights the sensor's ability to improve safety, operational efficiency, reliability, and durability, and reduce total cost of ownership.

Sensors
12th May 2009
Honeywell's Upgraded Low-pressure Plastic Silicon Pressure Sensors Improve Performance And Could Reduce Manufacturing Costs

Honeywell has expanded its industry-leading ASDX plastic silicon pressure sensor family with the new ASDX Series and ASDX-DO Series, which offer pressure ranges from 1 psi to 5 psi and on-board signal conditioning. The on-board signal conditioning allows the customer to remove those components from their PC board to free space, may reduce their acquisition, inventory, and assembly costs, and minimize potential problems from having multiple signal...

Sensors
12th May 2009
Surface Mount Humdity Sensors That Operate At A Lower Supply Voltage

Honeywell hsd introduced its HIH-5030/5031 Series humidity sensor that supports demanding system performance requirements, providing enhanced stability, accuracy, and response time over the entire humidity range of 0~100% RH.

Communications
12th May 2009
Honeywell Introduces Customizable, Configurable Handlebar Controls

Honeywell has introduced a new line of handlebar controls to meet off-road vehicle manufacturers' desire for controls that are easily customized, incur low upfront tooling costs, enhance safety, and increase design flexibility.

Passives
6th April 2009
Honeywell gets International Safety Certification on MICRO SWITCH Hazardous Location Switch Family

Honeywell has announced that its MICRO SWITCH EX Series Hazardous Location line of switch products has received the International Electrotechnical Commission's Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx). With this international certification, Honeywell's global customers know that their explosion-proof switches meet the IEC's high standards for equipment used in explosive atmospheres.

Sensors
10th March 2009
Honeywell's Hall-effect Magnetic Position Sensors Provide Enhanced Sensitivity In A Miniature Package

Honeywell has introduced its SS361RT and SS461R Bipolar Latch, Hall-Effect Magnetic Position Sensors, giving customers the opportunity to help reduce manufacturing costs. The SS361RT and SS461R sensors' enhanced sensitivity enables the use of less expensive magnets in some applications. The SS361RT sensor's very small footprint takes up less space on the printed circuit board, typically allowing for a reduction in costs. Additionally, the SS361RT...

Passives
2nd February 2009
Honeywell's Series 1000 Pressure Switch Meets Tough Specs

Honeywell has introduced the Series 1000 pressure switch for potential hydraulic brake pressure applications. Honeywell’s Series 1000 switch excels in brake systems used in many harsh environments such as extreme weather conditions or particle-filled areas due to its IP65 sealing and high burst rating. With its high resistance to shock and vibration, this pressure switch is designed to withstand pressure spikes in critical systems.

Passives
2nd February 2009
Honeywell Introduces Micro Switch™1HP Series Sealed Pressure Switch

Honeywell introduces its MICRO SWITCH™ 1HP Series pressure switch. The 1HP Series is an easily configurable pressure switch that can be rapidly customized to the precise, demanding requirements of aerospace and military applications. Offering the industry’s broadest pressure range (150 psi – 5000 psi) and a wide selection of fittings, electrical connectors, pressure set points and differentials, the 1HP series also enhances accuracy, conta...

Sensors
2nd February 2009
Honeywell Hall-effect Rotary Position Sensor Endures Harsh Conditions, Enhances Precision

Honeywell recently introduced 17 new RPN Series Hall-Effect Rotary Position Sensors that simplify customer use by providing the inputs, outputs and voltage ranges needed for nearly any control system.

First Previous Page 5 of 5 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier