Computrol, Inc. Articles
Computrol acquires Western Electronics
It has been announced that Computrol has acquired Western Electronics, as Computrol will merge the Western Electronics’ Meridian facility with its existing local facility, and operate the Denver, CO facility under the Computrol name.
Test capabilities to debut at MD&M West
Computrol has announced plans to exhibit in Booth #524 at MD&M West, scheduled to take place February 7-9th 2017 at the Anaheim Convention Center in CA.
Computrol expands Its SMT capability
Computrol has purchased and installed an Assembléon iFlex T2 and two iFlex H1s from Kulicke & Soffa. The iFlex T2 is a multifunctional or line-balancing solution with a large component range while the iFlex H1 end-of-line solution offers odd-form and gripper capabilities.
Computrol triples inspection capability
Computrol has purchased three KY-8030-3 in-line, fully automated SPI systems from Koh Young Technology. The KY-8030-3 uses patented Koh Young shadow-free inspection technology and software to deliver 100 percent 3D inspection of solder paste.
Computrol increases its X-ray Inspection capability
Computrol has purchased an XD7600NT Ruby X-ray from Nordson DAGE and the system has already been installed at Computrol’s Meridian, ID facility. The Nordson DAGE NT maintenance-free, sealed-transmissive X-ray tube, providing 0.5µm feature recognition and up to 10W of power, together with the 2Mpixel XiDAT3 digital image intensifier covers all the failure analysis and manufacturing tasks required in the production environment.
Computrol Increases AOI Capabilities
Computrol has purchased two Mirtec MV-7 OMNI 3D In-Line AOI Machines and installed them at its Meridian, ID facility. Computrol selected the machines following the success it has had with the systems installed at its Orem, Utah facility in 2014.
Computrol to mix it at Amcon
Computrol is set to exhibit at AmCon Seattle, schedule to take place from Feb 16 to 17. Computrol representatives will discuss high-mix electronic manufacturing and lot traceability capabilities.
Computrol to mix it up at ATX West
Computrol will exhibit its complete line of electronics manufacturing services, including high-mix electronic manufacturing and lot traceability capabilities at ATX West from Feb 9-11 in Anaheim.
Computrol to explore high-mix manufacturing & lot traceability at SMTAI
Computrol will exhibit in Booth #938 at SMTA international, from 29th to 30th at the Donald Stephens Convention Center in Illinois, USA. Computrol representatives will discuss its complete line of electronics manufacturing services, including high-mix electronic manufacturing and lot traceability capabilities.
Low to medium volume, high mix EMS on display at IPC APEX
Computrol has announced that it will exhibit in Booth 3134 at the IPC APEX EXPO, scheduled to take place 24th to 26th February 2015 at the San Diego Convention Centre in San Diego. Company representatives will discuss the benefits of Computrol's high-mix electronics manufacturing services.
High-mix manufacturing & traceability on show at MD&M West
Exhibiting in Booth #2472 at MD&M West, 10th to 12th February in California, company representatives will discuss Computrol’s high-mix electronic manufacturing and lot traceability capabilities.
Computrol installs technology for inline cleaning
Computrol has purchased patent-pending Flood Box technology for inline cleaning from Technical Devices Company. Installed at Computrol’s Idaho facility, Computrol will benefit from lower costs and easier compliance with environmental standards.
Computrol to Discuss High Mix, Low- to Mid-Volume Manufacturing Services at the Del Mar Show
Computrol is pleased to announce that it will exhibit in Booth #730-732 at the Del Mar Electronics & Design Show (DMEDS), scheduled to take place May 1-2, 2013 at the Del Mar Fairgrounds in San Diego, CA.
Computrol To Exhibit Enhanced Manufacturing Capabilities At IPC APEX 2013
Computrol has today announced that it will exhibit in Booth #2532 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Computrol has made a number of equipment purchases since the last IPC APEX EXPO and company representatives will be on hand at the show to discuss the company’s enhanced capabilities.
Computrol to Exhibit Award-Winning Manufacturing Services at 2012 IPC APEX Expo
Computrol, Inc., announces that it will exhibit in Booth #2851 at the upcoming IPC APEX Expo, scheduled to take place February 28 - March 1, 2012 at the San Diego Convention Center in California.
Computrol Is Now AS9100C:2009 Certified
Computrol announces that it has received its registration for AS9100C:2009. To successfully achieve certification for AS9100C:2009, Computrol demonstrated its ability to consistently provide products that meet customer and applicable statutory and regulatory requirements while maintaining a consistent level of quality throughout its operations.
Computrol Wins a Prestigious Global Technology Award for Its Manufacturing Services
Computrol that it has been awarded a Global Technology Award for its Contract Manufacturing Services. The award was presented to the company during a Tuesday, November 15, 2011 ceremony that took place at the New Munich Trade Fair Centre in Munich, Germany during Productronica 2011.
Learn About Computrol’s Contract Manufacturing Services at DMC 2011
Computrol announces that it will exhibit in Booth #554 at the upcoming Defense Manufacturing Conference (DMC), scheduled to take place November 28 - December 1, 2011 at the Anaheim Convention Center in Anaheim, CA.
Computrol Invests in Two Rhythm Slide Selective Soldering Systems
Computrol purchased two Rhythm Slide Selective Soldering Systems from RPS Automation LLC. RPS designs and manufactures reliable, high-quality soldering automation and solderability test systems. The purchase of the Rhythm Slide Selective Soldering Systems is a key step in Computrol’s strategic effort to increase its capacity and expand its capabilities. “With today’s state-of-the-art and dense designs, the use of wave solder pallets is no...
Computrol to Highlight Manufacturing Services at Solar Power International 2011
Computrol, Inc., announces that it will exhibit in Booth #4449 at the upcoming Solar Power International, scheduled to take place October 17-20, 2011 at the Dallas Convention Center in Dallas, TX.