Binder has introduced a new 12-pole version of its M12 connectors that incorporates offset soldering levels.  The three inner contacts are raised making soldering of terminations far easier and less time consuming thus reducing production and maintenance costs.

Binder has introduced new UL-listed M12 connectors with moulded cables that incorporate a hard wearing and impact resistant PUR jacketed cable that is resistant to welding sparks. Designed primarily for robotic welding equipment, the new PUR cable replaces the traditional irradiated cross-linked cables that are not recyclable and therefore present disposal difficulties.

Binder-USA is pleased to announce the addition of crimp termination to a variety of M16 connectors. Expanding the M16 product line with crimp termination will offer more options for factory production and increase productivity by simplifying assembly of the connectors.

Binder series 768 and 718 M8 connectors have been enhanced with the introduction of new 8-pole panel-mount versions that have been incorporated in the standard connector bodies that previously could only accommodate 3, 4 and 6 poles.

The Binder range of M12 power connectors has been extended with the addition of new four-pole versions that have M12-S and M12-T coding. M12-S coding is typically used for power applications on AC motors where large M23 metal connectors are usually used while M12-T coding is used for DC power supplies in structured networks where large circular 7/8in, M23, RD24 or rectangular connectors are commonly used.

Binder has responded to increasing customer demand by supplying cut lengths of the same high quality cable as is used in the production of its own moulded connector/cable combinations. This allows customers to use the same PUR and PVC cables for terminating Binder’s extensive range of field-attachable connectors as are used on the pre-terminated over-moulded cables.

The widely used range of Binder M8 connectors has been enhanced with the introduction of new angled versions with screw clamp contacts. The three and four pole connectors consist of a contact carrier and an angled cable outlet with locking screw and the innovative design allows the housing to be mounted in one of two positions 180° apart so that the angled cable outlet can be oriented to suit the application.

Binder-USA has expanded its Series 768 and 718 M8 product line with new 8-pin panel-mount receptacles. The receptacles provide an ideal solution for applications requiring high pin numbers in areas with limited space. The connectors are commonly used for sensors and actuators in the industrial and automation industries.

The widely-used Series 720 range of snap-in IP67 connectors from Binder has been extended with the introduction of panel mount versions with dip-solder contacts that complement the existing solder-bucket panel mount versions and the cable and moulded connectors.

Binder-USA is pleased to announce the formation of a strategic partnership with OCP Group, OCP Group specializes in designing and manufacturing custom cable assemblies and wire harnesses for automation, instrumentation, medical, and transportation industries.

Binder-USA releases the new Series 770 NCC connectors, which are IP67-rated in unmated condition. Applications are primarily in medical and industrial environments where frequent spillages and wash-downs are expected. The panel-mounted receptacle has an internal sliding cap that moves forward and seals the contact area when the plug is disconnected from the receptacle.

Binder-USA has expanded the Series 720 snap-in panel-mount receptacles to now offer dip solder contacts. This addition provides more options for applications requiring a direct assembly to a printed circuit board. The snap-in connectors are ideally suited for commercial and medical applications because of their quick connect and disconnect feature.

The popular and extensive range of Binder M16 connectors has been extended with the introduction of versions with crimp termination allowing simple and easy termination without the need for soldering.

In order to better transmit power in place of data, Binder has made significant changes to this industry standard M12 connector, and has released the M12 connectors with a new S-coding design.

The popular Binder 620 series of sub-miniature, snap-in, IP67 connectors has been extended with both the cable connectors and panel mount sockets now available in red, blue and green options in addition to the existing black versions thus providing a simple and low-cost coding system.

Binder UK will be joining forces with its parent company Franz Binder GmbH and showing a wide range of circular connectors on Stand 261 in Hall B3 at Electronica 2012 on 13th to 16th November. Among the extensive display will be high-power versions of M12 connectors that can carry up to 8A on each contact. Until recently M12 connectors have been limited to 4A with a maximum cable diameter of 8mm and individual wire sizes of 0.75mm².

The extensive range of Binder IP67, M16 connectors that is available in both nickel plated brass (series 423) and black polyamide (series 723) has now been approved by United Laboratories and issued certificate number 20120329-E302391.

Binder UK has today announced that it will be showing a wide range of circular connectors on Stand D11 at Sensing Technology 2012 to be held at the NEC, Birmingham on 25th and 26th September. Products will include the extensive range of M5, M8 and M12 sensor connectors used widely in the sensor, instrumentation, automation, medical and industrial equipment markets, along with new product developments such as high current versions of M12 connector...

Binder-USA has expanded its Series 713 and 763 M12 connector line with panel mount connectors featuring screw terminations. With screw terminations it is now possible to attach wires in the field without any special tooling or soldering. This addition is ideally suited for signal and power applications requiring a solder-less assembly.

The popular Binder RD24 connector range has been extended with the introduction of new right-angled versions with larger cable outlets. Until now angled versions could only accommodate cables between 6-8mm but the new versions can accommodate cable sizes of 8-10mm (PG11) and 10-12mm (PG13.5) increasing the application range.