Top performance: Right-angle, Type-A single USB-3.0 receptacle from SUYIN protrudes just 2.5 mm above the PCB surface

14th December 2011
Source: SUYIN GmbH
Posted By : ES Admin
Top performance: Right-angle, Type-A single USB-3.0 receptacle from SUYIN protrudes just 2.5 mm above the PCB surface
SUYIN's 020053XR009MX21XL 9-pin, right-angle, Type-A single USB-3.0 receptacle for through-hole mounting is a particularly space-saving variant. With an overall length of 16.6 mm, this female USB 3.0 connector is very short. Moreover, due to its innovative sink type housing design, this receptacle can also be partially inserted into a recess in the printed circuit board, which makes it possible to achieve an unusually low component height of just 2.5 mm above the board.
Two right-angled THT soldering tabs attached halfway up the sides of the housing, together with two metal snap-in clips on the sides at the solder connection cover ensure particularly sturdy anchoring on the board. These USB 3.0 receptacles, which are downward compatible with USB 2.0, are equipped with nine contacts: four for USB 2.0 plus five for USB 3.0. These female connectors are supplied in tape & reel packaging and are also available in halogen-free versions.

SUYIN can supply customers with a quote for production volumes beginning at 80,000 pieces per year. Additionally, SUYIN can support the product ramp-up phase by supplying smaller amounts.

Key specifications at a glance:

Connector type
Right-angled USB 3.0 receptacle, type-A, 9-pole
Dimensions
16.6 x 16.0 x 7.24 (L x W x H in mm)
Height above PCB
2.5 mm
Part number
020053XR009MX21XL

You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi
The Sensor Show 2020
16th June 2020
Germany Messe Munich