Test & Measurement

Displaying 11 - 20 of 4382

RF power meter accelerates complex test setups

RF power meter accelerates complex test setups
High-precision RF power measurement for modern applications is a challenge. Rohde & Schwarz is launching the R&S NRX RF power meter on the market so that users can transparently configure their measurements and perform them conveniently. The instrument even makes it possible to perform triggered and synchronised multichannel measurements with different power sensors.
18th March 2019

Handheld network tester ousts laptops in the field

Handheld network tester ousts laptops in the field
NaviTEK IE is the first purpose built handheld network tester from Ideal Networks. It is designed for commissioning, preventative maintenance and troubleshooting of PROFINET Industrial Ethernet networks, plus standard Ethernet IP networks. The instrument has been developed to simplify the process of testing both cabling and networks in Industrial Ethernet networks that utilise the PROFINET protocol.
14th March 2019

16-bit AWGs boast 40 or 125MS/s speed

16-bit AWGs boast 40 or 125MS/s speed
Six Arbitrary Waveform Generators (AWGs) optimised for signal quality, size and cost have been introduced by Spectrum Instrumentation. The new "65" series AWGs offer the latest 16-bit Digital-Analogue-Converters, a fast PCIe x4 interface with up to 700MByte/s streaming speed and a card length of only 168 mm to fit into nearly every PC.
13th March 2019


eCall solution cuts testing time

TUV Rhineland has selected Keysight's comprehensive emergency call (eCall) solution to reduce testing time.The Pan-EU eCall regulation, which has been enforced since April 1, 2018, requires rigorous testing of emergency call functionality in all new cars and light vans.
6th March 2019

Protocol analyser accelerates ADAS development

Protocol analyser accelerates ADAS development
A flexible and robust analyser designed to ease troubleshooting and support the development of complex imaging and detection systems for mobile displays and cameras has been launched by Teledyne LeCroy. The Envision X84 analyser supports both MIPI C-PHY/D-PHY and MIPI Camera Serial Interface (CSI-2)/MIPI Display Serial Interface (DSI-2) in a single platform, providing device designers and system integrators more design flexibility, control and expediency.
5th March 2019

Thermoplastic elastomers for nonslip protective frames

Thermoplastic elastomers for nonslip protective frames
It has been announced that Circutor SA, has chosen to use a compound of the THERMOLAST K family for the outer cover of its new MYeBOX power analysers. These thermoplastic elastomers (TPEs) combine cost-efficient processing with excellent adhesion to polycarbonate. They protect the portable devices against shock and impact and are certified according to UL94 HB.
4th March 2019

Seven-in-one oscilloscope unveiled at embedded world

Seven-in-one oscilloscope unveiled at embedded world
At embedded world 2019 in Nuremberg, RIGOL Technologies announced a significant addition to its UltraVision II family of oscilloscopes with the introduction of the MSO8000 Series Digital Oscilloscope. The core of the Rigol’s UltraVision II architecture is its Phoenix chip-set.
4th March 2019

Software tools enhance spectrum analysers

Software tools enhance spectrum analysers
Measuring applications for its real-time spectrum analysers were unveiled by Rigol Technologies at embedded world 2019 in Nuremberg - the Vector Signal Analysis Software VSA and the EMI Analysis Software. The RSA3000 and RSA5000 real-time spectrum analysers are based on Rigol's newly developed "Ultra Real" technology and are characterised by their compact design, operation via touch screen and their modularity for a variety of applications.  
4th March 2019

PAM4 options enhance signal quality analyser

PAM4 options enhance signal quality analyser
The Signal Quality Analyser-R MP1900A BERT from Anritsu has been enhanced with the introduction of four PAM4 BERT options adding multichannel synchronisation, multilane FEC pattern generation for 400GbE, Inter Symbol Interference (ISI) stressed signal generation to simulate transmission path losses, and application software for capturing device under test (DUT) error counts.
4th March 2019

High-definition mode enhances oscilloscopes range

High-definition mode enhances oscilloscopes range
Just in time for embedded world 2019 in Nuremberg (February 26-28), Rohde & Schwarz has announced that all R&S RTO and R&S RTP oscilloscopes will be equipped with the high definition mode featuring 16-bit vertical resolution. Users benefit from more measurement performance at the same price.
28th February 2019


Test & Measurement documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
Ceramics Expo 2019
29th April 2019
United States of America International Exposition Center (I-X Center)
PCIM 2019
7th May 2019
Germany Nürnberg Messe
Electronics & Applications 2019
14th May 2019
Netherlands Jaarbeurs Utrecht Hall 7 Jaarbeursplein
Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI