Test & Measurement
Compact Low Power ARM-based Vehicle Terminal Facilitates Fleet Management
NEXCOM has launched the mini ARM-based vehicle terminal VTC 100 which can run telematics applications on 8 watts of power and boot in 10 seconds. The VTC 100 features low power ARM Cortex-A8 processor, pre-installed operating system, various wireless and CAN bus communications and smart power management. This vehicle terminal can step up mobility and assists with driver hours of service (HOS) compliance for a variety of dispatch service, includin...
TREK-753 and its New Protective I/O Coverplate Work Well in Harsh Environments
Advantech-DLoG is proud to announce the addition of a new, protective I/O coverplate to its award winning TREK-753, all-in-one 7” mobile data terminal. The TREK-753, a great choice for long haul trucking, law enforcement, ambulances, fire trucks, and heavy duty vehicle applications has been made even more robust with the addition of a protective coverplate. Serving more than just fleet management applications, TREK-753 is also a high ROI so...
R-Car H2 Offers a Complete Solution for the Next-Generation High-End Multimedia and Navigation Systems
Renesas Electronics today announced the availability of a new member of the R-Car Series of automotive Systems-on-Chip (SoCs). Capable of delivering more than 25,000 DMIPS, the R-Car H2 provides high performance and state-of-the-art 3D graphics capabilities for high-end multimedia and navigation automotive systems. The R-Car H2 is powered by the ARM CortexA-15 quad-core configuration running an additional ARM Cortex A-7 quad-core—the industry's...
PC-Based Universal PCB Test System Announced By Saelig
Saelig announce the System 8 Diagnostic Solution Plus - a unique, versatile, easy-to-use PCB test system that uses a selection of CD-drive-size modules to create a PC-driven PCB test station. The System 8 Diagnostic Solution Plus, which can be built in a PC case or 19 rack-mounted, is based on a comprehensive set of test instruments for complete testing and fault-finding needs on almost any kind of PCB.
Yamaichi Electronics Unveils New Test System For COM Express Modules
In many production facilities the regular main board is used for testing of COM Express modules. The modules are plugged into the usual COM Express connectors. Due to the limited number of mating cycles of the COM Express connectors, the main boards have to be replaced after 30 to 40 test cycles. The replacement of the 220 pin connector with a pitch of 0.5 mm is considered as very difficult and unreliable.
GOEPEL electronic upgrades ChipVORX to FPGA Embedded Instruments for Bit Error Rate Tests (BERT)
GOEPEL electronic‘s IP-based ChipVORX technology has been extended to execute Bit Error Rate Tests (BERT). The highly automated solution enables FPGA Embedded Instruments utilization in the form of special softcores for the test and design validation of high-speed I/O.
IPETRONIK Announce CAN-Measuring Module For Temperature Measurement With Pt100
With the M-RTD2, IPETRONIK has expanded its proven CAN-measuring modules of the M-Series to include a module for temperature measurement with platinum elements. The M-RTD2 has four electrically isolated measurement inputs. Pt100-sensors supporting 4-wire-technique can be used to acquire temperatures in a range of –50 °C to +450 °C. Each channel can be separately activated and scaled.
Agilent Technologies Introduces Industry’s First MIPI RFFE Protocol-Decoding Software for Oscilloscopes
Agilent Technologies today introduced the industry’s first software for decoding MIPI Radio Frequency Front-End (RFFE) protocol packets on oscilloscopes. The new protocol decoder provides design and validation engineers with a fast, easy way to validate and debug their RFFE interfaces.
Anritsu Announce New LTE-Advanced Measurement Software For MT8820C
In line with the wide scale deployment of LTE-Advanced mobile networks, Anritsu Corporation announce the commercial release of their new LTE-Advanced Measurement Software for the MT8820C Radio Communication Analyzer. The MX882012C-021 software suite offers mobile device developers and manufacturers the world’s first all-in-one tester solution for LTE-Advanced call-processing tests, including receiver and RF throughput test solutions.
IZT And LOG.IN Jointly Announce New Scenario-Based RF Signal Generator
IZT and LOG.IN have today jointly announced the availability of EXERCISE-RF. This new scenario-based RF signal generator is designed for interactive radio frequency testing environments and can generate a real-time radio frequency spectrum. The generated spectrum can be fed into a receiver such as the IZT R3000, a radio monitoring system, and even a geo-localization system based on multi-channel direction finders or Time Difference of Arrival sen...