Intended for installation in any type of well where a permanent downhole gauge may be installed, the connector will withstand up to 10,000 psi pressure. Installation is fast, easy, and requires minimal training. No soldering is required at the wellhead.
The Feedthru provides sealing to the exterior of the metal clad cable, and it provides a positive block against fluids or gasses that could pass through the metal clad cable in the event of a downhole breach. Sealing is achieved using a combination of tapered sealing threads and O-rings. Attachment to the wellhead requires only a 13mm opening (1/2-14 NPT), and the installed length of the Feedthru, including top connector, is less than 330mm. The maximum diameter of the installed device is 57mm. The top connector is angled with a 60-degree bend to help guide the cable away from the wellhead. For maintenance, the entire assembly may be easily disassembled.