1600W DC input supply suits distributed power architectures

13th October 2015
Posted By : Barney Scott
1600W DC input supply suits distributed power architectures

Murata has announced the latest addition to the D1U3CS Series of front-end, high efficiency, 1U packaged power supplies from Murata Power Solutions. The 1000VRMS isolated DC-input model to the D1U3CS Series can deliver a full 1600W, 12VDC output with a conversion efficiency as high as 93% at half load. The D1U3CS Series has a power density of 1.77W/cm3. A 3.3VDC, 20W standby output is also provided.

The DC-input D1U3CS Series is hot pluggable, and incorporates low-loss integral ORing FETs on its main 12V output for fault-tolerant, redundant, and N+1 applications. With active single-wire current sharing, up to 8 supplies can be easily paralleled for very high current applications. This model has no minimum load requirement.

Digitally programmable, the unit is equipped with an I2C interface and supports the industry-standard PMBus communications protocol. The supplies incorporate fan cooling with automatic speed control and have an ambient operating temperature range of 0 to +50°C.

The D1U3CS Series is comprehensively protected against overload and overvoltage conditions and delivers an MTBF of 395,000 hours. The power supply meets the rigorous EN55022-B and FCC part 15 Class B conducted emissions standards, and holds a full complement of international safety certifications including CE Mark and CSA.

Typical applications for the D1U3CS series include systems using distributed power architectures, such as computing, storage, networking, data centres and test and measurement systems.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

AMPER 2019
19th March 2019
Czech Republic Brno Exhibition Centre
LOPEC 2019
19th March 2019
Germany Messe Munchen
RF & Microwave 2019
20th March 2019
France Paris Expo, Porte de Versailles
ADAS Sensors 2019
20th March 2019
United States of America Detroit, Michigan
Anti-Counterfeiting Forum 2019
20th March 2019
United Kingdom Farnborough, Hampshire