This V-Lock system by SCHURTER is an attractive and simple solution to prevent an unintentional unplugging. Various different connectors, Power Entry Modules and several country-specific power cables are available with this option.

Modern solar inverters, that use MPP (maximum power point) trackers, generate disturbances into both the grid’s AC power line, as well as the DC side of the solar module. An AC filter is normally used on the grid’s AC power line, but the noise generated on the DC side tends to be overlooked. EMC standards EN 61000-6-3 and EN55014-1, however, also put limits on the noise generated from lines not connected to the grid, such as for example the l...

SCHURTER has extended the current rating of the successful 250 VAC, IEC time-lag sub miniature SMD fuse UMZ 250. This SMD fuse with clip is now available in 18 different current ratings from 80 mA to 4 A. The UMZ 250 offers time-lag T characteristic according to IEC 60127-4 and is an Universal Modular Fuse (UMF) with rated current values from 80 mA up to 4 A. The approved voltages are 250 VAC and 125 VDC according to IEC and 277 VAC and 250 VDC ...

SCHURTER has expanded its filter product portfolio, introducing EMC filters for DIN rail mounting series FMAB-RAIL and FMBB-RAIL for 1-phase systems, FMAC-RAIL for 3-phase-systems and FMAD-RAIL for 3-phase-systems with neutralline.

The power entry module series DC11, DC12, DC21, DC22, DD11, DD12, DD21, DD22, KM and KMF from SCHURTER, are extremely compact and robustly designed. The excellent performance makes them suitable for nearly any application using detachable power.

SCHURTER expands its family of EMI-Line Filters for one phase systems with a new and compact high end filter series, called the FMBB NEO. Three variations of 2-stage filter designs allow a specific selection of FMBB NEO filter products for efficient EMI solutions.

SCHURTER’s IEC C14 inlet with EMI filter, series 5120 ECO design, meets the increasing demands of IT, medical and industrial appliances. The existing panel mount version is now available with flexible wire leads in addition to quick connect and solder terminals. A PCB mount version is also newly introduced. The new configurations provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendly co...

SCHURTER extends its ECO filtered power entry module for DC applications, series 5003, with a newly added PCB mount version, and version with flexible wires to provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendy compact package. Applications are in data critial environment such as IT, telecom and data encription but also in DC supplied industry automation.

SCHURTER’s series 5008 inlet, according to IEC C8, with integrated EMI filter meets the increasing demands of IT, medical and consumer appliances for cost reduction and downsizing. The 5008 inlet provides a maximum performance and cost savings in a lightweight and environmental friendly package. The new design is now available with options for screw and snap-in mounting version.

SCHURTER has extended its range of DKFP current compensated chokes and offers now rated currents from 300 mA to 10 A. The DKFP chokes series cover now inductance values from 1 mH to 100 mH.

SCHURTER expands its filter product portfolio, introducing power line filter series FMBC NEO for 3-phase-systems and FMBD NEO for 3-phase-systems with neutral.

Schurter introduces the new USFF 1206 fuses with super-quick-acting characteristic for low current applications. The new product extends the current range of the successful USF 1206 for lower ratings ranging from 160 to 250 mA. The wire bonded fuse offers extremely low impedance values compared to competitive products, providing exceptional performance in dense circuits.

Schurter just introduced new protection covers for its popular TA35 series Circuit Breaker for Equipment. The 2-pole circuit breaker is now available with factory mounted covers in addition to its range of covers supplied separate for customer installation.

Schurter introduces the new solar fuse ASO and fuseholder FSO with quick-acting characteristic to protect photovoltaic and similar DC-applications. The new product extend the strategic segment “renewable energy” with a 1000 VDC fuse with a current range from 1 A to 30 A and a touch safe fuseholder FSO. As PV systems have grown in sitze, so have their circuit protection requirements such as voltage rating. This high performance DC fuse is in a...

SCHURTER products are ideal for use in medical appliances, meeting all the typical requirements such as durability, reliability, safety orientation and design ensuring hygiene as well as user-friendliness and maximum functional integration.

In niche markets with limited space, customers often look for a solution where SMD fuses should be replacable without soldering. The successful standard UMT 250 has been extended for this reason with a clip option.

SCHURTER’s latest power entry module (PEM), is compact and provides maximum electrical power density. The unit offers optimal EMC filter performance, features built-in overload protection and ensures resource-saving mounting.

The new MSM CS metal switch from SCHURTER is equipped with an actuator made of highly durable ceramic. Ceramic is a new technology employed in the production of an electro-mechanical switch. The new switch provides novel features that open up entirely new areas of application. The actuator material of the MSM CS is resistant to scratches, abrasion, impact and chemicals.

DISTRELEC / ELFA and SCHURTER Electronic Components further consolidate their long-standing partnership by signing a pan-European distribution agreement. In addition to a large portfolio of products including fuses / connectors / EMC and input systems, SCHURTER provides the DISTRELEC Group with broad knowledge of the most diverse applications and application areas. DISTRELEC / ELFA, in turn, contributes a large pan-European distribution network a...

SCHURTER now offers overvoltage protection components, thereby making it possible for users to obtain all components required for the electrical protection of their electronic appliances from one source.