Massive use of wireless devices in the 2.4 GHz band is producing what has been called the ISM Revolution. ISM mean: Industrial, Scientific and Medical. ISM bands are frequency bands of free use (portions of the radio-electric spectrum, for which no license is required). It doesn´t mean that the devices operating on ISM bands are exempt from the regulations governing the use of those bands, both from the standpoint of radio (power, channel, ...

Premo Group launches a new DCF and ripple control antenna. A through-hole antenna for applications using atomic watch signals. The new RCA-THT Series. There are several clock signal transmitters in different countries such as: DCF77-77.5kHz (Germany), HBG-75kHz (Switzerland), MSF-60kHz (United Kingdom), JJY-40&60kHz (Japan), WWVB-60kHz (USA), DCF49 (Germany): 129,1kHz (Mainfligen transmitter, 100kW), y 139kHz (Burg transmitter, 50kW), 135,6kH...

Premo Group launches a new DCF and ripple control antenna. A through-hole antenna for applications using atomic watch signals. The new RCA-THT Series. There are several clock signal transmitters in different countries such as: DCF77-77.5kHz (Germany), HBG-75kHz (Switzerland), MSF-60kHz (United Kingdom), JJY-40&60kHz (Japan), WWVB-60kHz (USA), DCF49 (Germany): 129,1kHz (Mainfligen transmitter, 100kW), y 139kHz (Burg transmitter, 50kW), 135,6kH...

After successful introduction of the highest precision and linear current sensors in the industry, the DCT Fluxgate family, Premo is increasing its current sensors product portfolio with as many as 35 new families of Hall Effect current transducers that has been successfully presented in Electronica Exhibition. The primary currents range from as low as 10 amps to as high as 2000 amps with the new HCT-2000LF.

Power Electronics is continuously demanding higher currents in wound components. Premo enlarges its portfolio of inductive components for Power Electronics by a full deployment of a Catalog to be launched this year, including single and three phase, transformers and reactors, current sensors and filters for currents as high as 2000 Amps.

PREMO enlarges its telecoil family with the new series ZTC0602, a high reliability and sensitivity coil for application in hearing aids, developed according to the highest quality standards (ISO/TS16949:02, ISO9001:2000).

The Electronics Industry is currently suffering from raw material shortages and allocations. Some critical components such as Hall Effect sensors and technical plastics like LCP continue to be in allocation thus making the Industry suffer from material shortages and very long lead times even over 30 weeks. Current sensors are critical components and difficult to replace by pin to pin equivalents. Over this struggling period, Premo is supporting i...

A global movement is underway as green energy usage change the way we travel, manufacture or basically live day by day. Many Canadian cities are already implementing lot of environmental politics, leading the trend in this new concept. Lot of companies are adapting and implementing these changes over their standards. PREMO has arrived to support them with their new series of components focused in environmental protection and energy saving.

PREMO, high quality inductive components manufacturer, is showing its comprehensive and innovative portfolio of components for photovoltaic applications with Ozeki, PREMO sales representative in Japan, at PV Japan 2010, which takes place from June 30-July 2, 2010. Visit PREMO at Hall C, booth P-C108.

PREMO launches a new EMC filter for PV installations, FEDC series, which allows EMC standards compliancy for entire PV system, prevent pre-mature panel aging and reduce installation volume.

PREMO enlarged its telecoil family with the new TP0602 series, a high reliability and sensitivity coil for application in hearing aids. The TP0602 is wound with thin copper wires less than 25 micron (up to 0.012mm diameter) and inductance values between 40 and 170mH. This telecoil achieves a high sensitivity to magnetic field in 1kHz (operation frequency in this kind of devices).The ferrite core material provide a stable performance in a wide ran...

PREMO enhances its current sensors product range with the newest HCT-1000-SH series, a high current Closed Loop Hall Effect Sensor. New market trends are going to the high current and high frequency devices, making a must to test and measure with excellent accuracy current levels up to 1000 Amps with any type of waveform (DC, AC, pulse, etc.).

PREMO enhances its receiver antennas range with the new RCA-ROD series (radio clock antenna), an antenna for synchronized clocks and ripple control (tariff switching, public lighting control, smart metering, etc.), which consist into a parallel resonant tank.

PREMO enhances its receiver antennas range with the new RCA-ROD series (radio clock antenna), an antenna for synchronized clocks and ripple control (tariff switching, public lighting control, smart metering, etc.), which consist into a parallel resonant tank.

Premo announces new 4,000 sqm plant with 500 sqm laboratory premises to be operating by Q4 2010 in Wuxi China. The company is growing over 30% and expects to grow at an annualized aggregated rate over 20% the next three years according to existing customers´ contracts and forecasts. This will require further capacity to be available for growth especially for applications in Power Electronics for Renewable energies and Automotive.

Inverters and DC/DC battery chargers for Electric and Hybrid Vehicles require minimum space (Premo’s New Automotive Current Sensor use just 2.4mm3), and maximum power handling per cubic cm (This sensor handles 14.6A/cm3). A proper switching management require digital controls more than conventional PWM and a real time high frequency ( The sensor is designed for 200kHz ) sampling of the currents flowing through the primary is a must for high...

Lear Corporation, leading global supplier of automotive seating systems and electrical power management systems and PREMO, technology leader for inductive, RFID components and EMC filters, announced today the formation of an agreement for the design and development of cutting edge inductive components and technology for automotive power electronics applications for hybrid vehicles.

PREMO has enlarged its broad range of transponders including its newest TOM1203LP series, a low profile, high performance, and robust transponder coil for automotive applications.

PREMO presents its new PBP19 Series, a new inductors family designed for DC/DC converters and telecom power supplies up to 500W, where the height of the 19 RAC system may be 0.25 U or 0.5 U, increasing power density and reducing telecom power systems sizes. The PBP19 series with 7.4 mm height is offered in Tape&Reel for SMT technology and allows a maximum surface of 92% of total area in contact with the heat dissipating interface, either a co...

PREMO has successfully participated at the CeBIT 2010, the largest technology exhibition in the field of innovation on information technology and telecommunications, which took place in Hannover (Germany) on 2-6 March and has received Spain as Guest Country.