• 2747 Loker Avenue West Carlsbad, CA
    United States of America
  • 1.760.431.1919
  • 1.760.431.2678

Nordson Articles

Displaying 1 - 20 of 29
13th July 2021
MARCH MegaVIA Plasma Treatment System for PCBs

Nordson Electronics Solutions has introduced the MARCH MegaVIA Plasma Treatment System with a 15-cell configuration for panel sizes up to 30x52 inches in printed circuit board manufacturing.

Component Management
4th May 2021
ASYMTEK Forte MAX System boosts fluid dispensing

Nordson Electronics Solutions has announced the new ASYMTEK Forte MAX fluid dispensing system with high accuracy, dual-valve jetting in two modes, and patented, real-time correction to accommodate skewed parts.

Events News
11th September 2018
Medium to large volume dispenser showcased

Dispensing, jetting, and coating equipment and technology company, Nordson ASYMTEK, has announced that it will demonstrate its Helios SD-960 Series Automated Fluid Dispensing System at The Battery Show, Novi, Michigan, USA and at Bondexpo, Stuttgart, Germany.

Component Management
2nd August 2018
Conformal coating solutions seminars

Leader in dispensing, jetting, and coating equipment and technologies, Nordson ASYMTEK, has announced a collaboration with The Peters Group, Kempen, Germany, to conduct a series of seminars in China on conformal coating.

Component Management
9th February 2018
Select spray applicator for conformal coating applications

Global provider of dispensing, jetting, and coating equipment and technologies, Nordson ASYMTEK, has introduced the new Select Coat SC-350 Select Spray applicator for conformal coating applications. According to the company, the SC-350 delivers superior edge definition and uniform coating thickness at high speeds while accommodating a wide range of fluid viscosities. The edge definition and control of the spray maintain tight keep-out zones ...

Test & Measurement
30th August 2017
2-in-1 inspection system to be introduced at NEPCON South China

  Nordson ASYMTEK will introduce its new Spectrum II Premier automated fluid dispensing system with built-in automated optical inspection system at NEPCON South China, in booth 1H20. ASYMTEK will also display its Conexis CX-3040 conformal coating system and present a technical paper on conformal coating in automotive electronics.

28th September 2016
Nordson honoured with SMTA Corporate Partnership Award

Nordson Corporation has received the SMTA Corporate Partnership award in recognition of its ongoing support of the Surface Mount Technology Association (SMTA). Several businesses within Nordson's Advanced Technology-Electronics Systems group are active Corporate members, including Nordson ASYMTEK, Nordson DAGE, and Nordson YESTECH. Nordson ASYMTEK's corporate membership dates back to 1989, before its acquisition by Nordson Corporation.

Component Management
17th August 2016
Nordson ASYMTEK to present at CMMF China

ASYMTEK will present the paper Advanced Dispense Solutions for Hand-held Devices, at China Mobile Manufacture Forum (CMMF) - August 25. In addition, they will be exhibiting the latest in jet dispensing and conformal coating technologies at NEPCON South China (August 30-Sept 1).

Component Management
14th July 2016
Leading duo to demo precision conductive coating spray application

Nordson ASYMTEK and Parker Chomerics are partnering at SEMICON West (July 12-14) to demonstrate precision, high-volume spray applications for EMI coating solutions. One specific solution uses Nordson ASYMTEK's Select Coat Conformal Coating System with a DispenseJet applicator to apply thin coatings of Parker Chomerics' new CHO-SHIELD-604 conductive coating to achieve a target thickness of 25 µm.

20th April 2016
Nordson ASYMTEK at SMT Hybrid Packaging

Nordson ASYMTEK is to present a triple-valve, closed-loop system to jet conformal coating, a UV oven to cure it, and an automated coating inspection system to verify the coating results in the SmartTec stand at SMT Hybrid Packaging.

9th March 2016
Dispensing and conformal coating systems and software at IPC APEX 2016

Nordson ASYMTEK will introduce its new generation of conformal coating, fluid dispensing, jetting, software, and hot bar soldering systems, capabilities, and applications at IPC APEX 2016. The systems deliver precision, flexibility, reliability, high throughput, ease-of-cleaning, and intuitive programming and operation with a low cost-of-ownership.

Component Management
9th March 2016
Nordson DIMA to showcase hot bar soldering at IPC APEX

Nordson DIMA will demonstrate its hot bar soldering and heat seal bonding equipment at IPC APEX EXPO 2016, in the booth of sister company, Nordson ASYMTEK. Show visitors can learn best practices in hot bar soldering and heat seal bonding processes and find solutions to their challenging assembly applications, like flex-to-flex, flex-to-PCB, and wire-to-PCB assembly, as well as rework. 

Component Management
5th December 2015
Nordson ASYMTEK wins Global Technology Award

Nordson ASYMTEK has won the 2015 Global Technology Award in the dispensing category for its Programmable Tilt + Rotate 5-Axis Fluid Dispenser. The award was presented at the recent productronica trade fair in Munich.

Component Management
11th November 2015
Jetting system dispenses small dot sizes at high frequencies

 Nordson ASYMTEK has introduced the Spectrum II Premier with the IntelliJet jetting system for dispensing small dot sizes at high frequencies without compromising the precision, high yield and long-term reliability needed for advanced packaging applications.

Component Management
17th September 2015
Cartridge comes in two pieces for easy cleaning

Nordson ASYMTEK introduces the NexJet NJ-8 system, which improves and simplifies the dispensing process for fast-paced production environments where precision, flexibility, and long-term reliability are important. The NJ-8's ReadiSet two piece jet cartridge is quickly and easily removed, cleaned, inspected and re-installed without tools, maximising equipment utilisation and up-time.

Component Management
9th July 2015
Dispenser uses five axes of automated control

  The Programmable Tilt + Rotate 5-Axis Fluid Dispenser, which dispenses fluid using five axes of automated control instead of only three, has been released by Nordson ASYMTEK.

Component Management
3rd June 2015
Dispensing systems selected for hearing aid manufacture

Nordson ASYMTEK has announced the sale of two Spectrum II S2-922 in-line dispensing systems to GN ReSound, one of the world's largest manufacturers of hearing healthcare solutions. GN ReSound presently has an installed base of off-line Nordson ASYMTEK coating systems and Axiom X-1000 dispensers. The Spectrum II systems are being used as part of automated manufacturing production lines to apply underfill in the manufacture of hearing aids.

Events News
23rd April 2015
NexJet system for precision jet dispensing

Nordson ASYMTEK will present live demonstrations of jetting, fluid dispensing and conformal coating at SMT Hybrid Packaging 2015. Nordson ASYMTEK will also demonstrate its award-winning Quantum Q-6800dispenser applying underfill on the Future Packaging Line Stand, 6-434A.

Events News
14th April 2015
Workshops on PCB manufacturing processes to be held

Nordson ASYMTEK has announced that it will partner with Kintner Equipment to conduct workshops on PCB manufacturing processes from 21st to 23rd April 2015, at the Kintner facility in New York. The free workshop is designed to present to manufacturing, process and quality engineers, ways to identify and resolve process-related issues, eliminate production bottlenecks and optimise production-line yields to improve profitability.

18th November 2014
Conformal coating system chosen by Czech company

A Nordson ASYMTEK Select Coat SL-940E selective conformal coating has been sold by its distributor, the Amtest Group to APRI in the Czech Republic, to automate its conformal coating process. The system has enabled APRI to increase capacity, improve repeatability, and ensure a more uniform and accurately applied conformal coating process.

First Previous Page 1 of 2 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Latest global electronics news
© Copyright 2021 Electronic Specifier