Anritsu EMEA Limited

Address:
200 Capability Green
Luton
Bedfordshire

LU1 3LU
United Kingdom

Phone: +44 1582 433200

Fax: +44 1582 731303

Web: http://www.anritsu.co.uk/

Changing now, to change the future.

On the occasion of the 120th anniversary of its founding, Anritsu is taking on the challenge of innovation for the next generation.


Anritsu EMEA Limited articles

Displaying 1 - 20 of 265

Beam management principles in 5G NR webinar

Beam management principles in 5G NR webinar
  This webinar from Anritsu focused on beam management principles and test methods in 5G NR. It covered the technical aspects of Sub6 GHz and mmWave frequencies. Delegates were able to gain an understanding of beam management in the context of massive MIMO and Channel Emulation.
2nd December 2019

Module enables error-free measurement of PAM4 signals at 116Gbit/s

Module enables error-free measurement of PAM4 signals at 116Gbit/s
The PAM4 Error Detector (ED) is a new module for the Anritsu Signal Quality Analyser-R MP1900A series. It achieves error-free measurement of PAM4 signals at 116Gbit/s. Combined with the previously released MP1900A series PAM4 Pattern Generator, the new module supports high-accuracy BER measurements of PAM4 signals.  
7th November 2019

Signal analyser wins PCI Express 4.0 test approval

Signal analyser wins PCI Express 4.0 test approval
Anritsu’s Signal Quality Analyser-R Series MP1900A has been approved by PCI-SIG as a compliance test measuring instrument for PCI Express 4.0 (PCIe Gen4). The MP1900A is already approved as an R&D test instrument supporting Gen3 compliance tests and is now approved for the Gen4 test standards.
22nd October 2019


EuMW 2019: 5G, satellite test solutions on parade

EuMW 2019: 5G, satellite test solutions on parade
Leading-edge test solutions for emerging 5G, satellite and signal integrity applications will be showcased by Anritsu at European Microwave Week (EuMW) in Paris (October 1-3). Also highlighted will be its vector network analyser (VNA) technology. These solutions meet the testing requirements to verify chipsets, components, and systems associated with today’s high-speed, high-frequency commercial and military applications.
16th September 2019

The error detector for signal quality analyser at ECOC 2019

The error detector for signal quality analyser at ECOC 2019
Anritsu announced that visitors to ECOC 2019 will see demonstrations of the brand new 64,2GBaud NRZ / 58,2GBaud PAM4 Error Detector for the MP1900A Signal Quality Analyser-R. The MP1900A series is a high-performance Bit Error Rate Tester (BERT) that accurately measures communications equipment, next-generation high-speed electronic and optical devices, including those for M2M and IoT applications, and optical transceivers used in high-end servers.
9th September 2019

Error detector with high PAM4 Rx sensitivity at ECOC

Error detector with high PAM4 Rx sensitivity at ECOC
With what the company believes to be the world’s highest operation bit rate and Rx sensitivity, this new ED module for Anritsu’s popular Signal Quality Analyser-R MP1900A Series PAM4 BERT supports high-accuracy Bit and Symbol Error Ratio measurement of PAM4 signals when combined with the previously released PAM4 Pattern Signal Generator.
3rd September 2019

PCI Express 5.0 technology demoed in Santa Clara

PCI Express 5.0 technology demoed in Santa Clara
PCI Express (PCIe) 5.0 technology has been demonstrated using the Anritsu Signal Quality Analyser-R MP1900A high-performance Bit Error Rate Tester (BERT) and Synopsys DesignWare IP for PCI Express 5.0 during the PCI-SIG Developers Conference 2019.
9th July 2019

Frequency option enhances vector network analysers

Frequency option enhances vector network analysers
A 43.5GHz frequency option has been released by Anritsu for its 2- and 4-port ShockLine MS46122B, MS46322B, MS46522B, and MS46524B vector network analysers (VNAs) with guaranteed specifications using Anritsu’s Extended-K type connectors and components.
13th June 2019

Optical spectrum analyser halves evaluation times

Optical spectrum analyser halves evaluation times
A spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems has been unveiled by Anritsu. The MS9740B keeps the same measurement-sensitivity performance, functions, and size as the predecessor MS9740A.  
12th April 2019

Active antenna systems and beamforming in 5G NR webinar

Active antenna systems and beamforming in 5G NR webinar
  Did you know that 5G is the ‘fifth generation in mobile networks’ and is already being rolled-out in some parts of the world?
4th April 2019

Four-channel scope delivers BER test for 100G/400G optical modules

Four-channel scope delivers BER test for 100G/400G optical modules
A four-channel (4ch) sampling oscilloscope option for the BERTWave MP2110A has been announced by Anritsu, enabling integration of multi-channel oscilloscope and BERT (Bit Error Rate Tester) in an-all-in-one unit. Backbone networks and data centres increasingly use 100G Ethernet to meet anticipated traffic demand for services such as 5G and are considering implementing 400G Ethernet.
31st March 2019

PAM4 options enhance signal quality analyser

PAM4 options enhance signal quality analyser
The Signal Quality Analyser-R MP1900A BERT from Anritsu has been enhanced with the introduction of four PAM4 BERT options adding multichannel synchronisation, multilane FEC pattern generation for 400GbE, Inter Symbol Interference (ISI) stressed signal generation to simulate transmission path losses, and application software for capturing device under test (DUT) error counts.
4th March 2019

Spectrum analyser delivers versatility for field engineers

Spectrum analyser delivers versatility for field engineers
Wireless test engineers out in the field can now access frequency coverage up to 54GHz with Anritsu’s Field Master Pro MS2090A RF handheld spectrum analyser launched today (February 26) at Mobile World Congress in Barcelona (February 25-28). Real-time spectrum analysis bandwidth is pushed up to 100MHz.
24th February 2019

GCF approval for 5G RF and 5G NR protocol conformance tests

GCF approval for 5G RF and 5G NR protocol conformance tests
Global provider of test and measurement solutions for advanced and converged networks, Anritsu Corporation, has announced that the 5G NR RF Conformance Test System ME7873NR has won approval for 5G NR RF Conformance Tests as well as the 5G NR Mobile Device Test Platform ME7834NR has won GCF Validation for 5G NR Protocol Conformance Tests from the Global Certification Forum in January 2019. 
30th January 2019

Anritsu developments for the automotive market

Anritsu developments for the automotive market
Electronic Specifier has recently been in discussion with Anritsu about the company’s new developments dedicated to the automotive market. Among them are fixed attenuators, power splitters, dividers, directional couplers, and spectrum analysers.  
22nd January 2019

Anritsu to brandish 5G test solutions at MWC 2019

Advanced solutions supporting the latest 5G standards and network deployments will be showcased by Anritsu at Mobile World Congress (MWC) 2019 in Barcelona (February 25-28). During the conference, Anritsu will focus on the key test and monitoring solutions for 5G device testing, Conformance Testing, eSIM, Field Installation and Testing, C-RAN deployment, Advanced Analytics and Telco Cloud Support.
17th January 2019

Anritsu webinar – Details of 3GPP Release 15

Anritsu webinar – Details of 3GPP Release 15
Anritsu are planning a webinar to aid preparation of the testing challenges of 5G. One of the company’s top experts will be discussing the 3GPP Release 15 and its potential impacts. The webinar will help attendees get to grips with the details of 3GPP 5G NR specification for R15. It will focus on 5G key concepts and protocol stack specification across all the layers. The webinar will take place on 12th February at 2.00pm GMT.
14th January 2019

400GbE PAM4 BER measurements in one package

400GbE PAM4 BER measurements in one package
A 64-Gbaud PAM4 Pulse Pattern Generator (PPG) and 32-Gbaud PAM4 Error Detector (ED) has been announced by Anritsu. This PAM4 BERT supports 400GbE testing when these modules are installed in the Anritsu Signal Quality Analyser-R MP1900A series to implement a bit-error-rate test solution with best-in-class signal level quality and excellent Rx sensitivity for next-generation broadband communication systems.
21st November 2018

W1 coaxial components with frequency coverage

W1 coaxial components with frequency coverage
W1 coaxial components that are metrology-grade designed and manufactured to deliver precision performance and repeatability for high-frequency measurements have been introduced by Anritsu, comprised of a W1 connectorised power splitter, power divider, directional coupler and attenuators.
1st October 2018

Handheld testers suited for LTE/5G Backhaul applications

Handheld testers suited for LTE/5G Backhaul applications
The ACCESS Master MT9085 series of handheld testers from Anritsu provide accuracy and broad measurement capability during installation and maintenance of fibre optic cable in LTE and 5G backhaul, as well as Metro and Core networks. The new MT9085 series incorporates a wide 8-inch colour touchscreen for enhanced operation, as and integrates Anritsu’s Fibre Visualizer as a standard feature.
12th September 2018


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi