Analog Devices is introducing the highly integrated ADM1275 hot-swap controller and power monitor for 2-20V input supplies. The new controller/monitor provides best in class power monitoring accuracy of 0.7% current sense accuracy with only 20 mV insertion loss when compared to alternative solutions. The ADM1275 enables accurate measurement of incoming power to allowing the system to take intelligent actions to reduce power consumption. By limiti...

Analog Devices is introducing the ADM6305 and ADM6306 dual-voltage supervisors that provide high-voltage threshold accuracy of 1.2 percent for monitoring low voltage core rails. These new supervisory ICs are designed to monitor two supplies, provide a reset signal to digital processor-based systems and are ideal for dual supply processors and FPGA's. Available in a space saving 1.7 mm x 3.0 mm SOT package, the new ADM6305 and ADM6306 expands ADI'...

Analog Devices, Inc released today the industry’s first fully differential attenuating precision amplifier.

Analog Devices, Inc is helping industrial equipment designers improve system performance and maintenance costs through vibration detection/isolation/correction. With today’s announcement of the new ADIS16227 iSensor vibration monitor, equipment designers have a fully integrated vibration analysis solution capable of autonomous operation. This enables the earliest detection, identification, and isolation of possible vibration sources from eq...

Analog Devices, Inc today launched the fourth generation of its award-winning octal (eight-channel) ultrasound receivers with the introduction of two new ICs that reduce system size, complexity, and power consumption for high-end, mid-range, and portable ultrasound systems. The need for smaller, faster, lower-power ultrasound equipment continues to grow as hospitals, medical clinics, and medical emergency units increasingly rely on more sophistic...

Analog Devices, Inc today introduced a SoC device that integrates all of the RF transmit and receive functions, data conversion, and processing elements required to enable a fully programmable radio. Designed for a range of remote, battery-powered wireless sensor network (WSN) applications, including utility meters, medical telemetry systems, building automation, asset tracking and security systems, the ultra-low-power ADuCRF101 radio SoC feature...

Analog Devices, Inc today introduced a SoC device that integrates all of the RF transmit and receive functions, data conversion, and processing elements required to enable a fully programmable radio. Designed for a range of remote, battery-powered wireless sensor network (WSN) applications, including utility meters, medical telemetry systems, building automation, asset tracking and security systems, the ultra-low-power ADuCRF101 radio SoC feature...

Analog Devices announced today that National Instruments, a leading global supplier of hardware and software for engineers, used ADI’s data converters in a breakthrough user interface technology that allows users to control a system by merely moving their eyes. In a departure from traditional gaming systems that use hand, wrist and body movements to play video games, Waterloo Labs, a team of engineers at National Instruments that creates experi...

Analog Devices, Inc today introduced a new highly integrated demodulator for broadband applications, such as cellular base stations, satellite communications, point-to-point (PtP) radios and defence systems. ADI’s new ADRF6850 demodulator expands ADI’s RF/microwave product portfolio and offers the highest level of integration and functionality by combining five devices and three RF functions into one small-footprint, surface-mount chip.

Analog Devices, Inc today introduced a new highly integrated demodulator for broadband applications, such as cellular base stations, satellite communications, point-to-point (PtP) radios and defence systems. ADI’s new ADRF6850 demodulator expands ADI’s RF/microwave product portfolio and offers the highest level of integration and functionality by combining five devices and three RF functions into one small-footprint, surface-mount chip.

The ADM3052 and ADM3053 are isolated CAN physical layer transceivers. The devices employ Analog Devices' iCoupler® technology to combine a 3-channel isolator, a CAN transceiver and an LDO regulator into a single package.

Analog Devices showcases the first Single-Supply ADC Driver that is capable of driving 40 MSPS to 200 MSPS, 1.8V, 14 Bit analog to digital converters.

Analog Devices introduced a digital isolator with an integrated transformer driver and PWM (pulse-width modulation) controller in a single package. The integration of these components into a small, surface mount 20-lead SSOP (shrink small outline package) enables the new four-channel digital isolator to reduce board space by up to 30 percent and achieve cost reductions of 10 percent while simplifying the development of systems requiring isolated ...

Analog Devices (ADI) introduced today low-power, low-noise drivers for 14-bit ADCs (analogue-to-digital converters). The ADA4930-1 and ADA4930-2 ultra-low-noise ADC drivers are capable of driving dc to 1.35-GHz signals while consuming only 115 mW (milliWatts) of power and operating with a single supply.

Analog Devices has expanded its industry-leading isolated interface product portfolio with two transceivers that are the first to isolate both data signals and power for systems using the CAN (control-area network) communications bus. The ADM3052 and ADM3053 use ADI’s iCoupler digital isolation technology; the ADM3053 also includes an isoPower integrated, isolated dc-to-dc converter, reducing component count by up to 80 percent compared to ...

Analog Devices introduces the new Blackfin® BF592 processor. It provides an overview of this new low-cost, high performance, low-power, and small form factor processor to ADI's industry-leading Blackfin portfolio

Breakthrough Price/Performance Extends Visual Development and Complex Algorithms to New Products and Applications

Advancements in Digital Signal Processing Technology Enable Sophisticated System Modeling for Sensorless Motor Control Designs By Anders Norlin Frederiksen

Analog Devices introduced a series of highly integrated RF/IF variable gain amplifiers (VGAs). ADI’s new ADL5201, ADL5202, ADL5240 and ADL5243 variable gain amplifiers offer breakthrough levels of integration—combining up to four discrete RF/IF blocks into a single device. With this unprecedented level of integration, radio system manufacturers can realize a significant reduction in component count and a major savings in BOM (bill of ...

The industry’s fastest 16-bit ADC at 250 MSPS was unveiled today by Analog Devices, Inc. (ADI). The AD9467 16-bit, 250 MSPS ADC operates on 35 percent less power at 25 percent higher sampling rate than any other 16-bit data converter, providing a new level of signal processing performance for test and measurement instrumentation, defence electronics, and communications applications where high resolution over a wide bandwidth is needed. The ...