Honeywell’s full line of subminiature pressure transducers accurately measure pressure ranges from 100 psi to 15000 psi. These gage-only subminiature pressure transducers have a high natural frequency and utilize a flush diaphragm that is manufactured from 17-4 PH Stainless Steel. Temperature compensation is accomplished by using temperature-sensitive components located inside the transducers. These transducers have a small electrical zero balance circuit board which is in the lead wire (approximately 1 in x 0.087 in thick). This balance board does not have to be in the same temperature as the transducers. All transducers have four (4) active bonded strain gages arranged in a Wheatstone-bridge configuration.
Honeywell offers a full line of lightweight subminiature pressure transducers which feature a compact, flush mount, low profile design and flush diaphragm enabling them to fit into extremely small spaces with tight clearances. The unitized stainless steel design, with a thin diaphragm and heavy sidewalls constructed from one piece of stainless steel, makes these sensors very rugged, yet thin enough to measure low pressures. Honeywell’s wet/wet subminiature differential pressure sensors offer a high degree of accuracy and pressure measurement ranges from 5 psid to 2000 psid. Their small size, bidirectional overload protection, wide temperature compensation and high natural frequencies make them uniquely suited to aerospace, chemical or nuclear applications.
Specifications:
Range – 100 psig to 15000 psig
Accuracy – 1.0 % FS BFSL
Media – Gases, liquids compatible with wetted parts
OutPut – 2 mV/V
Temperature, Operating – -54 °C to 149 °C [-65 °F to 300 °F]
Temperature, Compensated – 16 °C to 71 °C [60 °F to 160 °F]
Temperature Effect, Zero – 0.01 % FS/°F
Temperature Effect, Span – 0.02 % reading/°F
Electrical Termination – Four twisted leads (1.83 m [5 ft]) with external balance board
Mating Connector – None
Overload, Safe – 50 % over capacity
Overload, Burst – 400 % full scale
Wetted Parts Material – 17-4 PH Stainless Steel
Case Material – Stainless Steel
