New PoE midspan powers IP camera access point through interconnecting cable

Designated the POE31U-560DO, the power injector has a total output of 30W for powering two IEEE802.3af-compliant applications. The passive Power-over-Ethernet midspan offers no detection and therefore must be connected to devices that are compatible for PoE- powering.

“The new dual-output power injector is designed to go between IP cameras and access points, providing a data connection and power to both devices. The midspan can be located close to a power outlet and the Access Point and Camera can be mounted high on a wall without requiring an electrician’s services,” said Keith Hopwood, vice president of marketing for Phihong USA.
“This unique midspan takes the data from a device such as a security camera on port one and relays it through a radio access point on port two for wireless remote access.”

Standard features on the POE31U-560DO include short circuit protection and compatibility for gigabit base-T data rates. Additional safety features include Safe Extra Low Voltage so that the unit may be handled without injury. The device has been approved by cUL/UL and CE.

Offering 56V DC per port for a total power of 30W, the fully isolated midspan has a minimum output efficiency of 80% and may operate from 0°C up to 40°C.

The non-vented, spill-proof case measures 140mm by 65mm by 36mm and features an IEC320 C14 3-wire input. Pricing for the dual output midspan starts at
$30.54 in single-piece quantities.