The non-isolated series offers a 3 Amp programmable output voltage that can be set from +0.75 to +4.5 VDC to suit the needs of an individual industrial design. Power output at 4.5 Vout is 13.5 W. Using the same standard pinout as other OKI point of load converters, the OKI-T3-W32 further extends the product family into growing markets and new applications.
A remote On/Off input, using either a positive or negative source, allows the output to be controlled or sequenced in the case of an end-product using multiple input voltage sources. The modules also provide several protection features including under voltage lock out, output short circuit, over current and over temperature.
The series is capable of driving up to 1000 uF ceramic capacitive loads, aiding keeping ripple and noise to a minimum.
Operating temperature is from -40 degrees C to up to +85 degrees C with derating suiting most demanding environments.
The use of Murata Power Solutions’ point of load modules offer time and cost savings, together with reduced power system design risks. Customers can put their design efforts into the system design and not have to worry about the power design. All that is required are input and output capacitors and one resistor to program the output voltage. Layout, control loop stability, noise issues and protection are resolved in the module. By using one POL converter in place of multiple discrete parts also allows for a reduced bill of materials management and procurement.