These devices have a minimum load requirement of 0A, a stand-by power consumption of 0.3W maximum and a hold up time of 80mS typical (input 230V AC).
All models within this range feature output short circuit protection (continuous self-recovery), over-current protection and over-voltage protection.
These modules are Class II (double insulated) and can be powered from either an AC or DC with an input range of 85 – 264VAC (47 – 63Hz) and 100-370VDC respectively.
The input to output isolation is 4000V AC, maximum leakage current is 80µA maximum and the insulation meets level 2 x MOPP.
They feature low power consumption with an input to output efficiency of up to 81% and offer good EMC performance.
This series is housed in a compact flame-retardant and heat resistant case (UL94-V0 rated) that measures 53.8 x 28.8 x 19mm.
The modules have a wide operating temperature range of -25°C to +70°C and a high MTBF of > 300K hr’s (MIL-HDBK-217F@25°C).
This range is approved to EN60601/UL60601 and is particularly suited to medical applications although they can also be used for other applications including industrial control, instrumentation, telecommunications and civil applications.
This new product series will be featured alongside PowerPax’ full range of power conversion products including plugtop power supplies, desktop power supplies, industrial power supplies, AC/DC modules and DC/DC converters at the Electronics Design Show, in Coventry (October 19-20).
