Four-slot case for configurable AC/DC power supplies

16th April 2019
Posted By : Alex Lynn
Four-slot case for configurable AC/DC power supplies

The latest four-slot case and a new hold-up module has been announced by Artesyn Embedded Technologies for its second generation MicroMP (µMP) series configurable AC/DC power supplies. Designated µMP09, the new enclosure supports a maximum power output of 550W at 85 to 180VAC and 1,100W and 80 to 263VAC.

The new hold-up module is designed for high-reliability applications and enables the supply to continue providing power for a period of time if the input power is interrupted.

Measuring just 256.9x88.9x40mm the μMP09 case can be configured using Artesyn’s family of highly efficient, digitally controlled power modules certified to service a diverse range of applications including industrial, medical, test and measurement, telecoms, process control and military and aerospace systems.

Designed to ensure high efficiency and reliability, even in extreme environmental conditions, the µMP09 is rated for performance at temperatures from -40 to +70°C. It can withstand a shock of more than 50G and meets the MIL-STD-810G specification for vibration. The calculated mean time between failures is more than 350,000 hours at full load. Conformal coating is also available as an option.

The power supply is fully approved to the third edition of the EN60601-1 and UL ES60601-1 medical safety standards and with two times Means of Patient Protection (2XMOPP), it can be used in non-patient contact and non-patient critical equipment.

Hold up module
The new hold-up module for Artesyn’s μMP systems is designed to maintain electronic system operation during extended input bus drop-out scenarios. This can be important in industrial, military and aerospace applications.

The module is designed to enable compliance with the SEMI F47 specification, an industry standard for voltage sag immunity, which says that industrial equipment must tolerate voltage sags, or dips, on the AC mains supply to specific depths and durations.

While it is a critical requirement for many semiconductor processing applications, many other industries use SEMI F47 to benchmark the reliability and productivity of their equipment.

The new µMP series is just one line in Artesyn’s portfolio of configurable power supplies. Artesyn’s ConfigPro online power supply configurator helps customers find the optimal solution from the three million plus combinations enabled by its range of configurable power supplies. The ConfigPro tool makes it easier for industrial and medical equipment designers to specify and use configurable power supplies and can, in many cases, eliminate the need for expensive custom solutions.

Artesyn’s intuitive GUI-based control software, which can be downloaded free and used with Artesyn’s configurable power supplies, providing users with flexibility, including real-time input voltage, current and temperature monitoring to provide at-a-glance performance confirmation.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
ELIV 2019
16th October 2019
Germany Bonn World Conference Center