Companies

Artesyn Embedded Technologies

  • 2900 South Diablo Way, Suite 190 Tempe,
    AZ85282
    United States of America
  • +1 (888) 412-7832

Artesyn Embedded Technologies Articles

Displaying 1 - 20 of 69
Power
8th January 2020
DC-DC converter supports 48V data centre and network applications

Artesyn Embedded Power has announced the BDQ1300, a new 1,300W quarter-brick DC-DC converter, designed to provide the highest efficiency on-board 12V output for telecom, computing and server applications, with optional digital control. With efficiency rated over 97%, the BDQ1300 is designed as a voltage source for non-isolated point-of-load converters. It can accept an input voltage range from 40-60V, making it suitable for 48V dat...

Power
28th November 2019
Quarter brick DC/DC converter supports GaN power amplifiers

Artesyn Embedded Power has announced its newest DC/DC converter module focused at Gallium Nitride (GaN) radio frequency (RF) power amplifier (PA) applications, the 500W AGQ500 series. Housed in the industry standard quarter-brick format, the AGQ500 series offers greater than 95% typical efficiency and a wide input range of 36 to 75V.

Power
16th April 2019
Four-slot case for configurable AC/DC power supplies

The latest four-slot case and a new hold-up module has been announced by Artesyn Embedded Technologies for its second generation MicroMP (µMP) series configurable AC/DC power supplies. Designated µMP09, the new enclosure supports a maximum power output of 550W at 85 to 180VAC and 1,100W and 80 to 263VAC.

Power
26th February 2019
Non-isolated digital DC/DC modules for 5G nodes

A new product has been announced by Artesyn Embedded Technologies with the LGA50D DC/DC module, which claims to offer one of the highest current density ratings in the industry. With a footprint of just 25.4x12.5mm, this non-isolated unit offers two independent and configurable 25A, 50W outputs, which can also be combined to a single configurable 50A, 100W output.

Automotive
19th September 2018
Automatic train protection applications

  A collaboration has been announced between Artesyn Embedded Technologies and China Railway Signal & Communication Corporation (CRSC Wanquan), for the development of rail signalling solutions based on Artesyn’s ControlSafe Platform.

Power
30th August 2018
Intelligent high power system has 12kW case

Artesyn has announced an extension to its iHP series configurable intelligent high power system, with the addition of a 12kW case to the existing 24kW case. The new case provides a lower cost and smaller option for applications needing up to 12kW in 3kW increments and can be configured for up to four outputs using a wide variety of plug-in modules addressing a large range of voltages and currents. The lower power output enables users to configure...

Power
15th August 2018
Cost-effective 3000W power supply with medical safety approvals

Artesyn Embedded Technologies has announced the LCM3000 series AC/DC single-output enclosed power supplies, which can supply up to 3000W output power with medical and industrial safety approvals. Designed to be a cost-effective forced-air bulk front end power supply, the LCM3000 series offers configurable nominal outputs of 12, 24, 36, or 48V with output adjustability of plus or minus 25% and maximum current of 250amps.

Power
20th November 2017
DC/DC converters receive medical safety approvals

Artesyn Embedded Technologies has announced the AEE15W-M and AEE20W-M series, the new 15 and 20W DC/DC converters that provide OEMs with an economical solution for demanding applications in industrial and medical instrumentation requiring a certified supplementary or reinforced insulation system to comply with industrial or medical safety standards.

Power
9th November 2017
Quarter Brick DC/DC converter provides high efficiency

The ADQ800 series has been announced by Artesyn Embedded Technologies, as a new 800W quarter-brick isolated DC/DC converter with the high efficiency and thermal performance demanded by telecom network and data centre equipment. Capable of delivering up to 70A output current with a single fully regulated 11.8V output, the converters have no minimum load requirement.

Design
3rd August 2017
MaxCore Micro provides versatile compute and acceleration platform

Artesyn Embedded Technologies has announced a compact new compute and acceleration platform versatile enough for applications ranging from small cell baseband processing, scalable video streaming/encoding, video surveillance and ‘bump-in-the-wire’ monitoring to industrial computing. The MaxCore Micro is a cost-effective, enterprise-class chassis which holds a host server card and contains an additional slot for any PCI Express add-in ...

Aerospace & Defence
27th July 2017
High performance server blade for military networked systems

A powerful new packet processing and high performance server blade has been launched by Artesyn Embedded Technologies, the ATCA-7540, based on dual Intel Xeon Scalable processors (codename Skylake), which were recently announced. The ATCA-7540 provides a migration path and future-proof platform for defense applications in air/shipborne data centres, ground control stations, network data analytics, ad-hoc mobile networks and other C4ISR tasks.

Power
4th May 2017
Industrial DC/DC converter range extended with 6 and 8W models

  Artesyn Embedded Technologies has extended its range of low power output industrial DC/DC converters, targeting a diverse range of applications, including instrumentation, data communication, telecommunication and computer peripheral equipment, and industrial automation.

Automotive
13th April 2017
Rail safety architecture unveiled at SafeRail Congress 2017

At the SafeRail Congress that took place on 11th-12th April in Washington DC, Artesyn Embedded Technologies unveiled the latest in its portfolio of SIL4 COTS computing systems for rail safety applications, the ControlSafe Carborne Platform. Designed for onboard applications such as Automatic Train Protection (ATP), Automatic Train Operation (ATO), and Positive Train Control (PTC), the new platform can also be used in wayside train control an...

Power
28th March 2017
Configurable high power system has medical safety approvals

Artesyn Embedded Technologies has launched a new configurable intelligent high power system, the iHP series, designed for a wide range of medical and industrial applications. The new modular power system provides accuracy, resolution and stability as either a programmable voltage or current source. It provides up to 24 kW in 3 kW increments and can be configured for up to eight outputs using a wide variety of plug-in modules that address a large ...

Enclosures
13th March 2017
NVIDIA Tesla P4-enabled sled suits CG-OpenRack-19

  Artesyn Embedded Technologies has announced a new hyperscale media acceleration server sled based on the CG-OpenRack-19 architecture, which is inspired by rack-scale architectures. Artesyn’s new platform, named the CG19-GPU sled, will be used by carriers to add NVIDIA Tesla P4 processing to their network infrastructure systems.

Power
7th December 2016
DC/DC converter module offers 95% typical efficiency

A 700W half brick DC/DC converter module has been launched by Artesyn Embedded Technologies, the ADH700 series. The first model available offers a 28V nominal output and is designed to support the popular use of LDMOS technology used in high power wireless Base Station (BTS) deployments. 

Automotive
7th November 2016
System accelerates time-to-market for application developers

A Safety Integrity Level 4 (SIL4) certification has been announced for Artesyn's Embedded Computing ControlSafe Expansion Box Platform with ControlSafe Expansion Box computer and ControlSafe EXB software. Certified by TÜV SÜD, this Commercial Off-The-Shelf (COTS) fail-safe and fault-tolerant computing platform is designed for a wide range of train control and rail signaling applications.

Power
4th November 2016
Digital DC/DC converters suitable for telecom applications

Two digitally-controlled DC/DC converters have been launched by Artesyn Embedded Technologies. The ADO300 and ADQ700 are suited to telecom, computing and server applications. Both converters are in standard DOSA compliant digital interface brick format and pin configuration and are available with baseplate or open frame options.

Power
21st October 2016
Compact industrial DC/DC converters have wide input range

A series of compact 3W DC/DC converters has been announced by Artesyn Embedded Technologies. It targets a diverse range of low power applications, including data and telecommunication, instrumentation, computer peripheral equipment, industrial automation and mobile battery-powered systems. 

Power
7th October 2016
550W CRPS server power supply reaches 94% efficiency

A 550W server power supply has been announced by Artesyn Embedded Technologies. It follows the Intel Common Redundant Power Supply (CRPS) specification which is designed for hyper-converged compute, networking and storage infrastructure in enterprise IT and cloud environments.

First Previous Page 1 of 4 Next Last

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news