Seika’s Solder Paste Recycling Unit enables approximately 90 percent of waste solder paste to be recovered as solder bar. The system provides a major decrease in disposal costs for factory waste, a reduction in CO2 emissions, and reduced costs for solder bar as a result of recycling waste. As an additional benefit, the recycling unit enables selection of manual mode and automatic mode using a touch screen panel.
Seika will feature the new Sawa Eco-Roll large roll model that cleans wiper rolls up to 24. The Sawa Eco-Roll eliminates waste and saves money by reusing wiper rolls for printing machines. In addition to providing a reduction in waste, use of the wiper roll cleaner results in reduced CO2 emissions in just 20 minutes.
Additionally, Seika will launch new products:
The SC-EN20E Sawa Eco-Nozzle Mounter Nozzle Cleaner cleans 20 nozzles at a time. With the system, ultrasonically-vibrated water thoroughly passes through every nozzle opening. Double-cleaning power is generated with ultrasonic-energy cleaning and simultaneous vacuum suction. Nozzle tips and apertures can be cleaned without leaving any residue. The Sawa Eco-Nozzle is compatible with Panasonic, YAHAMA and JUKI nozzles. A wide range of nozzle holders are available to accommodate most mounter manufacturers.
The Seitec Bravo STS-2533 IN H & SJ Soldering System is specially designed for in-line and modular selective soldering. The programmable system features a special nozzle design and a spray fluxer unit, enabling flawless soldering of leads and pads. Additional features include a conveyor with roller, a specially designed solder pot and a drawer-type solder pot. The Bravo STS-2533 from Seitec is the ideal soldering solution for mass production.
The Andes Solbot II Multi-Point Selective Soldering System uses customized and dedicated fixtures/nozzles. The lead-free compatible system is user-friendly and features a compact footprint of only 540x720x250 mm. The Solbot can solder PCBs up to 260×340 mm. Additionally, the number of components on the PCB does not affect tact time.
The new AI-TEC PCB Conformal Coating and Curing System is a patented conformal coating dispenser designed to control both the temperature and viscosity with a circulated pump unit. The system controls coating width with ultra-precision. The compact, space-saving design features a combined drying (curing) unit. The AI-Tec PCB system features an option for auto or manual changeover and width change, QR code reading, and is server communication ready. Additional features include dual-side coating, tilt, double-head, jet-dispensing and masking. The AI-TEC PCB Conformal Coating and Curing System is customizable depending on customer specifications.