The TZ1053 TELRAN uses AMx state-of-the-art ultra-low energy technology to deliver much longer life from low voltage battery-based systems for customers developing ultra-low energy applications – without compromising on performance. Designed with ease of use in mind, the TELRAN contains an enhanced 8051 running Toumaz’s Nanopower Sensor Protocol (NSP) allowing developers to program and control the TELRAN device easily with high level commands either over a standard interface, e.g. UART, or over the air.
TELRAN TZ1053 devices will be available worldwide as engineering samples from the end of February 2011, with production devices in full availability from June 2011. A TELRAN developer kit will also be available at the end of February from CompoTRON GmbH. The TELRAN Development Kit (TDK) includes a USB TELRAN basestation, TELRAN RF module and an accelerometer sensor board with demo and PC application. The TELRAN RF module (TZ1053RFM) is also available to customers for fast prototyping and production.
Features
Bidirectional secure wireless transceiver
Single battery cell supply 1.08-1.5V
Transceiver current Tx 3mA, Rx 2.8mA
Configurable duty cycle (average power guarantee)
High level NSP protocol giving a robust and easy to use radio network
Raw data rate 50kbps
Range: 10m (Pout -10dBm)
20m (Pout -4dBm)
AES128 encryption in hardware
OTA (Over the Air) programming
Supports sensor networks
Simple digital sensor interface
5x GPIO, 3V tolerant digital I/Os
I2C compatible/SPI/GPIO/UART
Peer to peer and star network supported
Temperature range -40 to +85
32 pin VQFN package 5x5x09.mm