Companies

SABIC Innovative Plastics

SABIC Innovative Plastics Articles

Displaying 1 - 20 of 31
Cables/Connecting
20th September 2022
SABIC’s resin supports shift from pluggable to co-packaged optics

SABIC, a global specialist in the chemical industry, is launching at the ECOC Exhibition 2022 its EXTEM RH1016UCL resin. A high-heat, near-infrared (IR)-transparent grade, well-suited for injection-moulded lenses used in co-packaged optical transceivers and other optical connectors.

Power
29th June 2022
SABIC highlight BLUEHERO electrification initiative at The Battery Show Europe 2022

SABIC, will showcase its BLUEHERO electrification initiative at The Battery Show Europe 2022, from 28th to 30th June 2022 in Stuttgart, Germany, while also highlighting its materials offering and expertise for next-gen batteries and energy storage applications.

Mixed Signal/Analog
21st April 2022
Compound offering easy plating with LDS for 5G antennas

SABIC, of the chemical industry, introduced LNP THERMOCOMP OFC08V compound, a material well suited for 5G base station dipole antennas and other electrical/electronic applications.

Industrial
24th January 2022
Bio-based copolymer resin for net zero goals

SABIC has introduced LNP ELCRIN EXL7414B copolymer, the company’s first bio-based polycarbonate (PC) copolymer to help advance the consumer electronics industry’s net zero carbon emissions goals.

Passives
7th September 2021
SABIC to present ELCRES dielectric film at PCIM Asia 2021

Developed in response to the demand for high-voltage, high-temperature, professional-grade capacitor applications, such as traction inverters for hybrid, plug-in hybrid and battery electric vehicles. This innovative solution addresses the critical performance gap experienced by incumbent films in the +135°C to +150°C operating temperature range and enables the possibility to fully deploy the power and range promise of silicon carbide inve...

Passives
6th July 2021
ELCRES HTV150 dielectric film performs at 150°C

SABIC has introduced its new five-micron ELCRES HTV150 dielectric film for high-temperature, high-voltage, professional-grade capacitor applications, such as traction inverters for hybrid, plug-in hybrid and battery electric vehicles (xEV).

Component Management
6th July 2021
Honeycomb cores with NORYL GTX deliver heat performance

EconCore has developed new honeycomb cores for laminated sandwich panels made with SABIC’s NORYL GTX resin, a polyphenylene ether (PPE) blend, and EconCore’s proprietary technology. The new honeycomb core presents higher heat performance, better dimensional stability and lower water absorption compared to honeycomb structures made with traditional thermoplastics.

5G
7th September 2020
NORYL SA9000 resin supports 5G infrastructure growth

SABIC has announced that it intends to boost production capacity for its specialty NORYL SA9000 resin to support rapid growth of high-performance printed circuit boards (PCBs) used in 5G base stations and high-speed servers. It is anticipated that this latest expansion, which builds on 2019 increases, will nearly double regional production in Asia and increase overall NORYL SA9000 resin production in Asia tenfold vs. 2018 levels.

5G
4th September 2020
SABIC high-performance materials for 5G infrastructure at CPME2020

SABIC had a significant presence at the recent third annual 5G Terminal Processing Industry Chain Exhibition (CPME2020) in Dongguan, China, where the company exhibited for the first time its growing portfolio of high-performance materials for 5G base stations, terminals and mobile devices. SABIC experts also gave nine presentations at CPME2020 on the company’s specialised materials including LNP compounds and copolymers, ULTEM resin, and NO...

Passives
21st August 2018
Expanded portfolio of ULTEM UTF120 film for dielectric capacitors

  At PCIM (Power Conversion and Intelligent Motion) Europe 2018, SABIC introduced two new gauges of ULTEM UTF120 polyetherimide (PEI) dielectric film for high temperature, professional-grade capacitor applications. 

Automotive
15th October 2012
SABIC Announces Portfolio Expansion with Launch of Three New Engineered LEXAN Film Products for Display, Electronics and Auto Sectors

SABIC’s Innovative Plastics business announced a major expansion of its industry leading LEXAN polycarbonate (PC) portfolio: three new engineered LEXAN PC film grades to help customers in the consumer electronics and automotive sectors meet growing demand for cost reduction, greater design flexibility, higher performance and compliance with global environmental regulations. The new grades – LEXAN HP92TTY, LEXAN 6060 and LEXAN OQ8DA films – ...

Optoelectronics
20th September 2012
SABIC Showcases Extensive Portfolio of Innovative Materials Technologies for the Lighting Industry at Strategies in Light Event

SABIC’s Innovative Plastics business is displaying the vast scope, versatility and quality of its material technologies for lighting applications at its booth (#B8) at the Strategies in Light event here. The company is spotlighting key aspects of its portfolio – one of the broadest in the lighting industry – including the LEXAN LUX family of high-performance polycarbonate (PC) resins for light emitting diode (LED) lighting, and other specia...

Optoelectronics
20th September 2012
SABIC'S LEXANT FXD Polycarbonate Resin was Chosen for Fonckel B.V.'s Fonckel One Lamp

When Fonckel B.V., a start-up company based in the Netherlands, needed expert assistance to turn the stunning design of its Fonckel One lamp – an interactive light emitting diode (LED) luminaire – into a commercial product, SABIC’s Innovative Plastics business was there to deliver its world-class customer support. With its robust portfolio of advanced thermoplastics for lighting applications, its Color Innovation Centre offering more than 1...

Analysis
11th September 2012
SABIC to Showcase Extensive Portfolio of Materials Solutions for the Lighting Industry at Strategies in Light Event in Munich, Germany

At the Strategies in Light exhibition in Munich, Germany, to be held September 18-20, SABIC's Innovative Plastics business will demonstrate how its broad portfolio of materials can help customers address key lighting trends ranging from new aesthetic requirements for light emitting diode (LED) retrofits to ever-increasing demands for better sustainability.

Design
1st August 2012
Canon Electronics receives help with New Scanner Housing from SABIC’s Xenoy iQ Resin

SABIC have revealed that Canon Electronics has selected high-performance Xenoy iQ ENH resin with up-cycled post-consumer recycled content for the housing of its new “imageFORMULA DR-M160” high-speed document scanner.

Analysis
1st August 2012
SABIC Expands Renowned Lexan Polycarbonate Portfolio with New High-End Materials for Consumer Electronics, Appliances and LED Lighting

SABIC’s Innovative Plastics business today announced here at NPE 2012 (Booth #29000) important new additions to its flagship portfolio of high-performance Lexan polycarbonate (PC) materials: Lexan CFR (clear flame retardant) copolymer and three new Lexan LUX resin grades. Lexan CFR copolymer addresses rising consumer electronics and appliance manufacturer demand for a clear, sustainable flame retardant (FR) material, and the new Lexan LUX resin...

Analysis
28th October 2011
China’s Leedarson Blazes Trail in LED Lighting with Stylish, White Heat Sinks Using LNP Konduit Compound from SABIC Innovative Plastics

SABIC Innovative Plastics today announced that Leedarson Lighting has selected LNP Konduit thermally conductive compound in a new white formulation to manufacture heat sinks for two of its light-emitting diode (LED) retrofit bulbs.

Optoelectronics
28th October 2011
SABIC’s Lexan LUX FR PC Grades Featuring Custom Diffusion and Optimal Luminance Help Light Engine’s LED Tubes Shine

Here at Chinaplas 2011, Booth 10.2E21, the Innovative Plastics strategic business unit of SABIC is shining a spotlight on its latest win: China-based Light Engine’s selection of customized Lexan* LUX high-diffusion resin grades to produce light-emitting diode (LED) tube lighting for its customer Optiled. Optiled is using newly commercialized Lexan LUX polycarbonate (PC) material for the covers of residential and office fixtures, shielding hot s...

Optoelectronics
24th June 2011
SABIC Paints a Bright Future for Laser Direct Structuring with New Custom-Colorable LNP* Thermocomp* Compound

The Innovative Plastics strategic business unit of SABIC announced the first new custom-colorable LNP* Thermocomp* thermoplastic compound for laser direct structuring (LDS) to save space and reduce the weight of mobile devices.

Optoelectronics
24th June 2011
SABIC’s Lexan* LUX FR PC Grades Featuring Custom Diffusion and Optimal Luminance Help Light Engine’s LED Tubes Shine

The Innovative Plastics strategic business unit of SABIC is shining a spotlight on its latest win: China-based Light Engine’s selection of customized Lexan* LUX high-diffusion resin grades to produce light-emitting diode (LED) tube lighting for its customer Optiled.

First Previous Page 1 of 2 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier