The Model 6001 Quartz eXpress Module (QuartzXM) from Pentek, has been introduced as the only high-performance system-on-module (SoM) market offering based on the Xilinx Zynq UltraScale+ RFSoC FPGA with eight integrated RF-class A/D and D/A converters.

It has been announced that Pentek are introducing the Talon RTX 25xx series, a high performance small form factor (SFF) recorder product line for extreme operating environments. Optimised for SWaP (size, weight and power), the rugged sealed ½ ATR recorders are available with multiple input options and can hold up to 30.7tB of removable SSD storage. 

Pentek has announced the new member of its Jade family of high-speed data converter XMC FPGA modules: the 2-channel Jade Model 71865, a 200MHz 16-bit A/D channeliser with 762 narrowband digital down converters (DDCs) and 4 wideband DDCs, based on the Xilinx Kintex UltraScale FPGA. The Model 71865 is an economical and energy efficient, complete software radio receiver solution for commercial, military and government high-channel count ap...

The first product in the Quartz Architecture family has been introduced by Pentek. The Model 5950, an eight-channel A/D and D/A converter with 3U OpenVPX board based on the Xilinx Zynq UltraScale+ RFSoC FPGA. It has dual optical 100 GigE interfaces, a QuartzXM eXpress Module which enables migration to other form factors, Navigator Design Suite for IP development and is available in commercial and rugged designs. The low latency benefits of the Qu...

Pentek has announced the Talon RTR 255x series, a new high performance Small Form Factor (SFF) recorder product line for serial data streams. Optimised for SWaP (size, weight and power), the Pentek Talon RTR SFF product line provides the performance and storage capacity previously only possible in much larger rack-mountable products.

  Pentek has introduced the newest member of the Jade family of high performance data converter XMC modules based on the Xilinx Kintex Ultrascale FPGA. The Model 71800 is a co-processor module with an XMC PCI Express Gen 3 interface and general purpose I/O using parallel LVDS and gigabit serial ports.

  Pentek, Inc., has announced the Talon RTR 254x series, a new high performance small form factor (SFF) recorder product line for analog RF/IF signals. Optimised for SWaP (size, weight and power), the Pentek Talon RTR SFF product line provides the performance and storage capacity previously only possible in much larger rack-mountable products.

A 3U VPX carrier board has been introduced by Pentek for FMC and FMC+ modules based on the high performance Xilinx Kintex UltraScale FPGA. The JadeFX Model 5983 includes a VITA-57.4 FMC site providing access to a wide range of I/O options. When combined with any of Pentek’s Flexor FMCs to create a FlexorSet, it becomes a complete multichannel data conversion and processing subsystem suitable for connection to IF, HF or RF ports of a co...

  Pentek has introduced the newest member of the Jade family of high performance data converter XMC modules based on the Xilinx Kintex Ultrascale FPGA. The Model 71132 is an XMC module featuring eight 250MHz 16-bit A/Ds with eight wideband Digital Down Converters (DDCs) and 64 multiband DDCs, all fully programmable.

Designer and manufacturer of COTS and rugged DSP boards and system recorders for commercial, government and military systems, Pentek, has introduced the newest member of the Jade family of high-performance data converter XMC modules based on the Xilinx Kintex UltraScale FPGA. The Model 71862 includes four 200MHz, 16-bit A/D channels and a combination of 32 programmable multiband DDCs for both wideband and narrowband frequency monitoring.

Designer and manufacturer of COTS and rugged DSP boards and system recorders for commercial, government and military systems, Pentek, has introduced the newest member of the Jade family of high-performance data converter XMC modules based on the Xilinx Kintex Ultrascale FPGA. The Model 71141 is a 6.4GHz dual channel analogue-to-digital and digital-to-analogue converter with programmable DDCs (digital downconverters) and DUCs (digital upconve...

A new addition has been introduced to Pentek's Talon series of recorders, the Model RTR 2745 rugged rackmount recorder. This newrecorder, optimised for rugged operating environments, increases the bandwidth for record and playback of the Talon Rackmount Series with capability to capture and reproduce signal bandwidths up to 560MHz. The RTR 2745 is a turnkey, wideband recording and playback system that provides real-time capture of RF and IF ...

Pentek has introduced new features and enhancements to its Talon SystemFlow software that improve the ease of use and recording capabilities of the entire line of Talon Recording Systems. The optimised enhancements to SystemFlow benefit radar, SIGINT and communications recording applications where reliability, speed and data integrity are mission-critical. SystemFlow is the software interface that is integrated into every Talon rec...

The newest member of the Jade family of data converter XMC modules has been introduced by Pentek. The Model 71851 is based on the Xilinx Kintex Ultrascale FPGA and features two 500MHz, 12-bit A/Ds with multiband Digital Down Converters (DDCs), one Digital Up Converter (DUC) and two 800MHz 16-bit D/As.

Pentek introduced the newest member of the Jade family of high-performance data converter XMC FPGA modules: the Jade Model 71841, a 1-channel, 3.6 GHz 12-bit A/D or 2-channel, 1.8 GHz 12-bit A/D XMC module based on the Xilinx Kintex Ultrascale FPGA. The Model 71841 comes preconfigured with a suite of built-in functions for data capture, synchronisation, time tagging and formatting, making it an ideal turn- key interface for radar, commu...

Pentek announced a new member of its popular family of Talon RF/IF signal recording and playback systems. The Model RTR 2727A rugged portable recorder targets applications needing to record and reproduce high-bandwidth signals. A complete PC workstation, the RTR 2727A provides high data capacity and aggregate recording rates of up to 4.0 GB/s in a four-channel system.

Pentek announced a new member of its family of Talon RF/IF signal recording and playback systems. The Model RTR 2727A rugged portable recorder targets applications needing to record and reproduce high-bandwidth signals. A complete PC workstation, the RTR 2727A provides high data capacity and aggregate recording rates of up to 4.0 GB/s in a four-channel system.

The Talon signal recording systems range from Pentek has a new addition. The RTR 2623 6 GHz RF Sentinel Intelligent Signal Scanning portable, rugged recorder combines and exploits the power of a Pentek Talon recording system with a fully integrated 6GHz RF down converter. The Sentinel capability adds intelligent signal scanning with real-time signal monitoring and detection that is fully user configurable.

An addition to Pentek's family of Talon signal recording systems has been announced, the RTR 2623 6GHz RF Sentinel Intelligent Signal Scanning portable, rugged recorder. The RTR 2623 combines and exploits the power of a Pentek Talon recording system with a fully integrated 6GHz RF down converter. 

  New members to the FlexorSet series of preconfigured solutions have been announced by Pentek: The FlexorSet Model 5973-313 for 3U VPX and Model 7070-313 for PCIe platforms consist of an FMC installed on either of two Flexor FMC carriers with Virtex-7 FPGAs.