Companies

CyberOptics Corporation

  • 5900 Golden Hills Drive Minneapolis
    MN 55416
    United States of America
  • +1 763.542.5000
  • www.cyberoptics.com
  • +1 763.542.5100

CyberOptics Corporation Articles

Displaying 1 - 20 of 48
Optoelectronics
6th August 2019
MRS-enabled multi-function system adopted for micro LED technology

CyberOptics has announced that its Multi-Reflection Suppression (MRS)-Enabled SQ3000 multi-function system for Automated Optical Inspection (AOI), Solder Paste Inspection (SPI) and Coordinate Measurements (CMM) is being used for the inspection and measurement of proprietary Rohinni micro LED-based technology.

Sensors
5th February 2018
Next-gen airborne particle sensor unveiled at SEMICON Korea

  Global developer and manufacturer of high precision 3D sensing technology solutions, CyberOptics demonstrated its next-gen Airborne Particle Sensor technology (APS3) 300mm with new ParticleSpectrum software at SEMICON Korea, 31st January to the 2nd February at the Seoul COEX in booth A418.

Sensors
21st December 2017
High resolution MRS sensor achieves Global Technology Award

CyberOptics was awarded a 2017 Global Technology Award for its Ultra-High Resolution Multi-Reflection Suppression (MRS) sensor for the CyberOptics’ SQ3000 3D AOI system. Premiering in 2005, the Global Technology Awards programme is an annual celebration of product excellence in electronics surface mount assembly. Premier products based on the finest examples of creative advancement in technology are chosen by a distinguished panel of indust...

Sensors
10th August 2017
Extension of the SQ3000 platform unveiled and maximises flexibility

Unveiling the new SQ3000-DD 3D Automated Optical Inspection (AOI) system with two Multi-Reflection Suppression (MRS) Sensors, CyberOptics Corporation will be in booth 1J45 at NEPCON South China, scheduled to take place 29th-31st August, 2017 at the Shenzhen Convention & Exhibition Centre.

Test & Measurement
11th April 2017
3D scanning inspection system

Laser Design, Inc., a subsidiary of CyberOptics,  will demonstrate its CyberGage360, a metrology-grade, ultra-fast, one-button automated 3D scanning and inspection system at the Control show, May 9-12th in Stuttgart. Using one button, a precise 360-degree 3D scan of complex parts along with a full 3D inspection report can be generated in just a few minutes. According to the company, little training is required for set-up, programmi...

Events News
9th February 2017
Next-gen airborne particle sensor tech showcased at SEMICON

Global developer and manufacturer of high precision 3D sensing technology solutions, CyberOptics, has announced it will demonstrate its next-gen Airborne Particle Sensor technology (APS2) with an extended particle size range at SEMICON Korea, February 8th-10th at the COEX in Seoul, booth 2220.

Optoelectronics
17th January 2017
Multi-Reflection Suppression sensor unveiled at IPC 2017

  Unveiling an advanced high resolution Multi-Reflection Suppression (MRS) sensor for the CyberOptics’ SQ3000 3D AOI system in Booth 2809, will be CyberOptics, at the 2017 IPC APEX EXPO, 14th-16th February 2017 at the San Diego Convention Center in California.

Events News
17th January 2017
MRS-enabled systems to maximise ROI for various applications

Plans to exhibit in Booth #2809 at the 2017 IPC APEX EXPO, scheduled to take place on February 14-16th 2017 at the San Diego Convention Center in Calif has been announced by CyberOptics.

Optoelectronics
24th November 2016
Particle sensing functionality to be showcased at SEMICON Japan

CyberOptics announces it will showcase its next-generation Airborne Particle Sensor technology (APS2) with an extended particle size range at the upcoming SEMICON Japan in Tokyo, December 14-16, 2016 in booth #4605. CyberOptics’ APS2 portfolio speeds equipment set-up and long-term yields in semiconductor fabs by wirelessly monitoring airborne particles in real-time.

Test & Measurement
25th August 2016
MRS-Enabled AOI to be featured at SMTAI

CyberOptics Corporation has announced plans to exhibit at SMTA International with live demonstrations of its SQ3000 3D Automated Optical Inspection (AOI) system which is said to maximize ROI and line utilization with multi-view 3D sensors that capture and transmit data simultaneously, and in parallel, accelerating 3D inspection speed versus alternate technology.

Test & Measurement
23rd August 2016
3D SPI at productronica India

CyberOptics Corporation has just announced it will exhibit with Maxim SMT at productronica India (Sept 21-23) at the Bangalore International Exhibition Centre. CyberOptics will demonstrate its SQ3000 3D Automated Optical Inspection (AOI) system as well as the SE500-II 3D SPI system.

Test & Measurement
17th August 2016
3D Scanning Inspection at 2016 IMTS

Laser Design, Inc. will showcase its CyberGage360, a metrology-grade, ultra fast, one-button automated 3D scanning and inspection system at the 2016 International Manufacturing Technology Show (IMTS) in Chicago.

Analysis
16th August 2016
Airborne particle sensors on show at SEMICON Taiwan

CyberOptics just announced it will showcase its next-generation Airborne Particle Sensor technology (APS2), that incorporates large particle sensing capability at SEMICON Taiwan in Taipei (September 7-9). Both the WaferSense and ReticleSense Airborne Particle Sensors (APS2, APSR and APSRQ) can measure both small and large particles.

Test & Measurement
26th July 2016
3D AOI at NEPCON South China

CyberOptics will exhibit with Kasion Automation  at NEPCON South China (Aug 30-Sept 1) at the Shenzhen Convention & Exhibition Center and will demonstrate the SQ3000 3D Automated Optical Inspection (AOI) system.

Analysis
29th June 2016
Large particle sensing at SEMICON West

CyberOptics will showcase its next-generation Advanced Airborne Particle Sensors at the SEMICON West 2016 (July 12-14). The current product portfolio has improved equipment set-up and long-term yields in semiconductor fabs by wirelessly monitoring airborne particles in real-time. The next-generation APS2 provides greater versatility, with better accuracy and sensitivity welcomed by semiconductor fabs and equipment OEMs worldwide. 

Test & Measurement
25th March 2016
3D AOI at NEPCON China

CyberOptics  will exhibit with Kasion Automation Ltd. (KAL) at NEPCON China and will demonstrate the new SQ30003D Automated Optical Inspection (AOI) system. The system is said to maximize ROI and line utilization with multi-view 3D sensors that capture and transmit data simultaneously, and in parallel, accelerating 3D inspection speed versus alternate technology.

Test & Measurement
14th March 2016
Automated 3D Scanning System at APEX EXPO

CyberOptics has announced it will debut its CyberGage360, a high-precision automated 3D scanning system at IPC APEX EXPO. CyberGage360 greatly facilitates quality assurance of incoming parts and in process inspection of components on the manufacturing floor.

Test & Measurement
16th February 2016
CyberOptics to Exhibit at APEX

CyberOptics has announced that it will exhibit at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. The company will showcase CyberOptics’ new SQ3000 3D Automated Optical Inspection (AOI) system.

Test & Measurement
21st October 2015
High-speed, high-accuracy AOI at productronica

CyberOptics has announced that it showcase its new SQ3000 3D Automated Optical Inspection (AOI) system and launch advanced new product features at productronica.  

Events News
18th September 2015
CyberOptics to showcase the SQ3000 3D AOI at SMTAI

CyberOptics announced that it will exhibit in Booth 814 at SMTA International, scheduled to take place from 29th to 30th September 2015 at the Donald Stephens Convention Centre in Rosemont, IL. Company representatives will showcase CyberOptics’ recently launched SQ3000 3D AOI system.

First Previous Page 1 of 3 Next Last

Featured products

Upcoming Events

View all events
Newsletter
Latest global electronics news